Connecting Your Television

You will require: an antenna source and a coaxial cable or cables. Please note a Rod Antenna is NOT SUPPLIED with televisions 19“ and larger. Connect the incoming signal to the ANT IN jack on the rear of the television using a coaxial cable.

Consult your Owner's Manual for assistance in performing the Channel Set-Up procedure.

The illustration below depicts the various types of incoming signals, including an indoor Rod Antenna, external VHF or UHF Antennas, or Cable or Satellite systems.

Connect your incoming signal, from either an antenna or cable source, to the television's ANT IN jack using a coaxial cable.

Connections and Set-Up

Please use the links below to consult illustrations and instructions for assistance in properly connecting your TV, VCR, DVD player, and other audio / visual components. Additional information may also be found in the FAQ and your Owner's Manual.

Note that this information is applicable to products marketed and distributed by Funai Corporation; if you are using components from another manufacturer, you may need to consult that manufacturer's product literature.