Problems with Khub

 

Silver Member
Username: Jayson

Post Number: 434
Registered: Aug-06
when I get the "connecting please wait" message the khub turn off its red light and do not turn it back on...sometimes I get a "khub not connected" message...when I go to network settings it says "checking please wait" and just stays like that...any suggestions???
Thanks

FYI:
all AU off
network mode
connection mode: DHCP
 

Bronze Member
Username: Franktodd

Post Number: 87
Registered: Sep-06
au on and mine up!
 

Silver Member
Username: Jayson

Post Number: 435
Registered: Aug-06
What do u mean monte???
 

Bronze Member
Username: Franktodd

Post Number: 88
Registered: Sep-06
on my setting all au on.
 

Silver Member
Username: Asplover

Post Number: 233
Registered: Jun-06
i would suggest to reset your internet connection to your Khub.

Sometimes kHub is not getting ip and you will get this message.
 

Silver Member
Username: Jayson

Post Number: 436
Registered: Aug-06
I have turned off and on router, modem, kbox...off and on au...installed khub.rom several times...checked cables...factory reset...nothing seems to work...
 

Bronze Member
Username: Franktodd

Post Number: 89
Registered: Sep-06
Ignore p rom activation outdated.Maybe try some reading at kboxkhub.org?
 

Silver Member
Username: Jayson

Post Number: 437
Registered: Aug-06
not getting ip address...I think my khub is broken...
 

Gold Member
Username: Saqeeb9000

Post Number: 6701
Registered: Oct-07
there is factory reset button on network mode, when u go there u can reset it to factory ,
other thing u can try is

The 212 bin is to help those that have a problems activating their KHubs This bin automatically activates the hub

1- If you've already activated your hub, when this file is loaded, it will keep your hub activated. If you wish to load the 180 Beta Factory just do a System Recovery before loading that file

2- A new Prodigy already has the factory file loaded a 1.76, so just load the 212 file

3- Go to Menu> Configuration> System Recovery> Factory Reset

4- Now you should setup your Sat settings, and scan your Sat.

5- Now that you've completed that go to: Menu> Installation> Options> Mode= Network
and ensure the 3 AU's above the mode are set to off.

6- Reboot your receiver and your hub

7- Allow the Hub time to activate. If you wish to know exactly what the Hub is doing go to Menu> Configuration> Network Settings.

Load the 212 file for your KHub Activation
__________________
 

Platinum Member
Username: Nydas

Post Number: 17642
Registered: Jun-06
Trust sada to have the right answer for kbox.
 

Silver Member
Username: Jayson

Post Number: 439
Registered: Aug-06
yup...working...thanks sada ur tha man...
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us