KBOX pro help

 

Silver Member
Username: Ssp

Post Number: 118
Registered: Jul-06
i add the freq 12033,12063
on 118' dish, but no signal please help how to get the signal ,thanks
 

Platinum Member
Username: Nydas

Post Number: 16654
Registered: Jun-06
Please tell us, if you have a 33" dish, a special LNB for 118, and if so, did you set it to 10750 and did you see green at the bottom and did you try "Blind Scan"?
 

Silver Member
Username: Ssp

Post Number: 119
Registered: Jul-06
i have 33" dish & special lnb. i scan indian ch like b4u music ,b4u movie sony max & work great, i want to scan freq 12033,12063 for other ind ch.thanks
 

Silver Member
Username: Pannu16

Post Number: 901
Registered: May-06
there is a problem with bin 211 onwards!! So u gotta use 203 bin and do a blind scan and then put 213 in and then put 203 back to watch channels again!!
 

Platinum Member
Username: Nydas

Post Number: 16665
Registered: Jun-06
You could try BIN 214 and see if it will do the job.
 

Silver Member
Username: Ssp

Post Number: 120
Registered: Jul-06
i tried 203,213,214 but no green signal
 

Platinum Member
Username: Nydas

Post Number: 16676
Registered: Jun-06
Do a system restore, followed by a load from USB of 213 or 214, followed by a scan of the sat.
You may switch off in between as often as it takes to get the system running well or till your fingers ache from using the remote.
 

Platinum Member
Username: Nydas

Post Number: 16677
Registered: Jun-06
If that fails load the factory BIN 176 using loader and then start all over again as suggested earlier.
 

Gold Member
Username: Saqeeb9000

Post Number: 6289
Registered: Oct-07
sp you need to move ur dish slightly in order to get all thec channels,
which channels are u missing what are names of those channels,
just move ur dish little bit and u will be able to see those channels...
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us