Bronze Member Username: JamestaPost Number: 51 Registered: Jul-08 | caved in. Can some one send me a link with the instructions on how to down laod the new bins when they are released. Thanks |
Platinum Member Username: PlymouthCanada Post Number: 10966 Registered: Jan-08 | Download this file: Then load it with this loader: Do a factory default, then press Menu>Internet>SW Update and load the latest file. Scan your satellites like a standard receiver. |
Bronze Member Username: El_toro_the_greatNC USA Post Number: 47 Registered: Jul-09 | Now this is what I call a good post. No BS, No Bashing simple right to the point. Keep your post like this one and maybe the members here will stop fu*cking with you. |
Platinum Member Username: PlymouthCanada Post Number: 10967 Registered: Jan-08 | Whiskey My posts are always like this! I never started the bashing, if you read a little you will see it! Many ppl will bash me for any reason, competitors, Dn or Bev guys and many others reasons. |
Silver Member Username: AsploverPost Number: 167 Registered: Jun-06 | Plymouth you are one of the best helpers i have seen on this site. Keep the good work |
Bronze Member Username: RtfPost Number: 94 Registered: Aug-07 | Be nice to plymouth or he will banned you or have all your posts deleted or even worse. He will tell on you. |
Bronze Member Username: JamestaPost Number: 52 Registered: Jul-08 | So can i load this from my router or do i have have to connect the box up otherwise. You guys will have to walk me through this step by step. forgive my ignorance. thanks |
Platinum Member Username: PlymouthCanada Post Number: 10968 Registered: Jan-08 | asp lover Thanks for your support! James I have not tried to load it directly from server, but I think that you must load the file to get good IP settings before. |
New member Username: HebertovichSaint john, Nb Post Number: 1 Registered: Sep-09 | No you can hook it up, find it's IP, and load right from your your pc through the router. Very easy to do! |
Platinum Member Username: PlymouthCanada Post Number: 10969 Registered: Jan-08 | Mike You have to put your router IP adress on a internet page then load it, I know how do it. |
Bronze Member Username: JamestaPost Number: 53 Registered: Jul-08 | so sorry guys. Would i down load the 2 sites that were given to me and then save then to the desktop and also how would the box be connected to your pc to do this. thanks |
Gold Member Username: Saqeeb9000Post Number: 6002 Registered: Oct-07 | plymouth u are the best.. james here's how you use webloader.. i posted it long time ago, sada Gold Member Username: Saqeeb9000 Post Number: 3654 Registered: Oct-07 Posted on Thursday, August 14, 2008 - 09:08 pm: Edit Post sada Gold Member Username: Saqeeb9000 Post Number: 3462 Registered: Oct-07 Posted on Thursday, July 03, 2008 - 07:42 pm: -------------------------------------------------------------------------------- what u need to do is go to menu , internet, then network information, find ur ip adress...... now write down ip adress at some paper.. now go to internet browser, in adress bar type ur ip adres. just like you type [link removed] [link removed] [link removed] some hints .. when u are putting ip adress in adress bar, change the channel or some times tune in to 100 or 102 channels also help.. when u will type ur ip adress u wil get in to webloader, over there locate ur latest bin that u saved and then clik on upload wait 1 min........ and ur rec will turn off and on again.. to check if u have latest bin, check under menu system setting, it should says latestbin. after thaat if u still not up, go to menu usersetting and turn off emulator and autorolls on... this should work..... https://www.ecoustics.com/electronics/forum/home-video/500222.html |
Bronze Member Username: JamestaPost Number: 55 Registered: Jul-08 | thanks man. So if i have the box wired up through my router this process will work? |
Platinum Member Username: PlymouthCanada Post Number: 10971 Registered: Jan-08 | James Yes! Put your Receiver in port 1 and choose this IP 198.168.1.1, then put your Router Username then Password. |
Silver Member Username: SumpPost Number: 305 Registered: Aug-09 | nope !!! |
Platinum Member Username: PlymouthCanada Post Number: 10979 Registered: Jan-08 | James Yes! Put your Receiver in port 1 and choose this IP 198.168.1.1, then put your Router Username then Password. Now you can access to your receiver and send the file without cable. |
Gold Member Username: RunnerguyPluto Post Number: 1879 Registered: Sep-06 | James! Do NOT listen to Plymouth. sump is much more qualified. I am pretty sure plymouth is a 12 yr old who takes drugs and may be very G@y. |
Platinum Member Username: PlymouthCanada Post Number: 10982 Registered: Jan-08 | zulu Go play with your Tonka idiot! |