How Do I get 118.7 signal ?
|
Bronze Member Username: Bassi911Post Number: 87 Registered: Jun-06 | Ok im going to buy a Nfusion receiver tomorrow but i have currently 61.5 and 119 signals. I want to get 118.7, so what else do i need to buy to get 118.7? Do i need some special LNB ? I have the normal sized dish, i believe 18 inch? DO i have to replace it? | |
|
Bronze Member Username: El_toro_the_greatNC USA Post Number: 16 Registered: Jul-09 | Ok im going to buy a Nfusion receiver tomorrow but i have currently 61.5 and 119 signals. I want to get 118.7, so what else do i need to buy to get 118.7? Do i need some special LNB ? YES I have the normal sized dish, i believe 18 inch? DO i have to replace it? Just leave it there maybe for future use??? Transat Electronics has what you need for $49.50 US Dollars. http://transatelectronics.com/store/33inch-dish-w-1187w-single-lnb_P488 |
|
|
Silver Member Username: Sjain80Post Number: 174 Registered: Jun-06 | ok I have a question also..I have dish500 with yoke adapter. I am trying to switch 119 lnb with118/119 lnb. Problem is that new lnb doesn't fit in yoke lnb holder. I put it somehow and getting channels on 119 but not able to pick interenation channel on 118( I have tried all frequency setting). So my question is: Can I use dish500 to get 118/119 and 110. If yeah, what are suggestion on lnb holder. If I should think about replacing my dish, is dish1000- a good replacement.I am trying to get both international and local channels..and I don't want to keep spending money in dish replacement again and again. |
|
|
Silver Member Username: Slo_hand2Post Number: 543 Registered: May-05 | You guys (Tejpal, Whiskey) need to read up on IKS. Shawn you need to read up on N3! |
|
|
Platinum Member Username: NydasPost Number: 16044 Registered: Jun-06 | Shawn: For 118.7W (amik 3) you NEED 500 plus or 1000 plus. Dish 500 or 1000 will not do.
|
|
|
Silver Member Username: InformerPost Number: 140 Registered: Mar-09 | shawn all you need is a 33"or 36" Dish it's about $10.00 more for the 36" Dish and this setup.  |
|
|
Bronze Member Username: Bassi911Post Number: 90 Registered: Jun-06 | will the 24inch dish work ? | |
|
Platinum Member Username: PlymouthCanada Post Number: 10873 Registered: Jan-08 | Tejpal If you are located in west coast, yes it can work!  |
|
|
Platinum Member Username: NydasPost Number: 16052 Registered: Jun-06 | Also transelectronic have a 24" dish specially designed for 118.7 - It is on their main page. I don't know if it works. In any case, you nust get a special LNB otherwise it will not work to the fullest extent. | |
|
Silver Member Username: Sjain80Post Number: 177 Registered: Jun-06 | Thanks nalin, I have someone coming over to install a 500 plus dish. I called this installer and he said the same thing as you did. Hopefully this is the last time I would be spending on changing dish. I told him to go ahead and put all 4 (119-118-110-129hd) lnbs so that I don't have to call him again..lol..thanks for the help.. | |
|
Silver Member Username: Sjain80Post Number: 178 Registered: Jun-06 | also, any suggestions to what would be better choice..500 or 1000 plus. | |
|
Platinum Member Username: NydasPost Number: 16059 Registered: Jun-06 | I think you have unknowingly ordered a 1000 plus installation. "As a 500+ it picks up 110W, 118.75W and 119W. Adding an LNB for 129W makes it a 1000+. " |
UploadMain Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics