I just bought a K-Box pro. How do I go about scanning all the channels. I have 110 on one LNB, and 118.8 and 119 on the circular LNB. Do I perform the scan under Dish Setting and do I need to scan individual satellites or do I use auto scan for each individual satellite. There is also blind scan. Do I need to use this?
diseqc is better, what kind of signals are u getting 65-70% are ok, u will get all channels on 118.8 it also depends on ur dish atleast 33 inch is recommend
sada i scan the sat . come out like number, channel number and tp number no channel name.I think i did something wrong on scan the sat. Let me know so i can scan one more time. thax
menu, dish settin, 118.8 lnb type single,lng freq 11250, lnb 22 khz off diseqc ..should be the one u are using..change it to 1, 2,3,4 and see the sat name of top should say 118.8 ( i mean both should match).. diseqc 1.1 off leg switch off
for 119 the only thing difference is u just need to change lnb type to universal..
bestbuy i mean boy lol quality is too low, u need to tweak ur dish from outside, easy way to do is to turn on beep for sound under option, then go out and tweak it u will hear difference in sound so u can easily tell if u have good signal without looking at tv..