N3 card fix

joeturn Silver Member Username: Joeturn Post Number: 548 Registered: Apr-06	Posted on Thursday, May 21, 2009 - 04:36 GMT What if you were to take a new card out of your sub reciever and read that card with your programmer! Save that read you will need it forever!! Then stick the card back into your reciever and order a PPV one of the ones your missing. During the show take the card out of the tv. Now back to your programmer and read that card. Now you have two files to compare this will give you the byte addresses to change. Hex editor will allow you to change those bytes! Put your edited file on your card and back into the stb,then wait till it goes blanc. Then put the original file back on the card and put it back in the tv and wait till it gets reset. Now compare that read it will give you the bytes to change for your expiration etc...! Then you edit it and put it on your card once again! Remembering you need your original read every time to get the card to reset after it gets zapped! If you have a cardless receiver you put the edited card read into your loader. A bit of an inconvenience but wouldn't that work ? Just asking? Gosh that could start the biz of reloading all over again!! Free files would not be posted anymore for a while at least, if that worked??? What about that Samantha? We could call it HUFF777
sada Gold Member Username: Saqeeb9000 Post Number: 4911 Registered: Oct-07	Posted on Thursday, May 21, 2009 - 04:41 GMT why don't u try it and let us know,
devin Silver Member Username: Lomna Calif U.S.A Post Number: 629 Registered: Dec-07	Posted on Thursday, May 21, 2009 - 04:46 GMT yes why not .. Good response sada
joeturn Silver Member Username: Joeturn Post Number: 550 Registered: Apr-06	Posted on Thursday, May 21, 2009 - 07:41 GMT I dont have access to any of the needed stuff mentioned! No sub, no card, no reciever and no programmer! If I had I would not be just asking.. Now hex is putting his in there sideways just like b4
Plymouth Gold Member Username: Plymouth Canada Post Number: 9315 Registered: Jan-08	Posted on Thursday, May 21, 2009 - 11:06 GMT You can't easily accessed in sub card, only read, each sub card need a nip code and receiver serial send by your receiver, that's why the old card was insert between the sub card and the card reader. A good hacker can unblock his card but can't reprogrammed to provide for everybody because the protocol is too complicated.
RUSH New member Username: Hannity REPUBLICAN, LOVE COUNTRY Post Number: 5 Registered: May-09	Posted on Thursday, May 21, 2009 - 13:50 GMT Hey Joe You hit on something big, NO KIDDING. I have no subs as it is against my religion to sub, but I dug up my old red dragon and it worked! Wide open ppv on my pansat 2700
joeturn Silver Member Username: Joeturn Post Number: 551 Registered: Apr-06	Posted on Thursday, May 21, 2009 - 13:53 GMT Is that the same theory! They all said it had an asic in it ! Then they went to claiming it cant be read because ASIC stood for A Specific Intergrated Circuit Every one knew it stood for Atmels System In a Chip You cant cover this up Plymouth its bigger than a breadbox!! rico right now is tring to figure a way to help you out of your painted into a corner spot.. nip code= network identification number meaning like unto 0101/0106/0907 You wont need anything to upgrade your pirate card but the original read. It will let the sub box update it with new data keys, new box keys, new what ever! If you can read it you can write it and if it cant be read the FTA/STBs would not have a new fix and they write them weekly! I will explain how there are soo many channels on a single transponder it has nothing do do with PID
Rico Gold Member Username: Riconissan Post Number: 1001 Registered: Feb-09	Posted on Thursday, May 21, 2009 - 14:14 GMT Here you go joeburn. http://vimeo.com/3530156
joeturn Silver Member Username: Joeturn Post Number: 552 Registered: Apr-06	Posted on Thursday, May 21, 2009 - 14:26 GMT That was a mean mama jama rico I'll bet that sucker could also write to a dvb card! Hemi Jimmi
joeturn Silver Member Username: Joeturn Post Number: 553 Registered: Apr-06	Posted on Thursday, May 21, 2009 - 14:30 GMT Did you click on my ezbake oven vidio lately they 've added the MONKEY to its preview just for me go look before they pull it.. They follow me every where I go . If your not paranoid you'll be destored! Lime lite This "gunsmoke" thingy might be interesting to a few?? http://www.mythtv.org/pipermail/mythtv-dev/2004-May/022069.html

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us