New member Username: Herz28camaroPost Number: 1 Registered: Apr-09 | Hello all Deanna here, I am new to the site and would greatly appreciate any and all assistance. To include digrams and how to pics. All of a sudden the TV started with this buzzing noise from the front of the tv and the colors were flickering and now the colors are fade in sections. The manual I have doesn't match up with what the TV looks like. I wanted to try to remove and the lamp. The back doesn't look like the manual..ugh.... Thank you in advance |
Bronze Member Username: AtrackerPost Number: 20 Registered: Mar-09 | Hi Deanna, Sounds like you need to replace your Color wheel. Go over to my post "The DMD board is not always the problem" if you need more help. Thanks, Andrew |
Bronze Member Username: TvtroublesolutionSan Diego, California USA Post Number: 36 Registered: Jun-09 | Hi Deanna, The problem sounds like the color wheel, basically the device spins at 5000 rpm and if it's out of balance or if it shatters, then it makes a loud humming, winding, whirling or whining sound (note: you may get no picture and your TV will turn off after a couple of seconds) . Other symptoms are: >Poor color, under saturated or over saturated >Black & white picture >The picture is intermittently in color and black & white >The picture is showing the wrong color >The TV starts to vibrate Here is a picture of a good color wheel and a shattered one: This link shows you a color wheel replacement guide: http://guides.fixyourdlp.com/samsung/bp96-01579a.php To get the part number of the color wheel just enter your TV model in this website: http://www.samsungparts.com/Default.asp?cookie_test=1 I hope this helps, take care. |