MY PANSAT 2700A IS NOT WORKING AT ALL WHEN I PLUG IT IN OR TURN IT ON NOTHING. NO B75 OR CHANNEL NUMBERS, CAN YOU PLEASE LET ME KNOW WHAT'S HAPPENING. THANKS
I JUST DOWNLOADED FATORY BIN 124 BY TURNING ON THE RECEIVER AND DOWNLOADING THE BIN AT THE SAME TIME. SO I TURNED ON THE RECEIVER AND THE LOADER AT THE SAME TIME AND I GOT THE B75 BACK, AFTER THAT I DOWNLOADED BIN 209 AND NOW ALL I'M GETTING IS B75 AND IT KEEPS REBOOTING HOW DO I FIX THAT?
Try Bin 124 followed by Bin 208, that's right 208 not 209. Let is come to "on" position. Then do user setup and antenna setup. Switch off at back, abd after 40 seconds load the latest 209 BIN. Go into antenna setup and scan. Enjoy TV.
NALIN I DID JUST LIKE YOU SUGGESTED DOWNLOADED FACTORY BIN 124 THEN BIN 208 AND NOW IT'S STUCK ON NUMBER 5 WHAT DO YOU THINK IS THE PROBLEM. THANKS IN ADVANCE
OH BY THE WAY NALIN WHENEVER I DOWNLOAD THE FILES ALL I SEE IS NIGHTRIDER LIGHTS,AND WHEN IT FINISHES DOWNLOADING IT GETS STUCK ON NUMBER 5. WHAT DO YOU THINK ABOUT THAT, THE BOX IS A PANSAT 2700. I HOPE YOU CAN HELP ME WITH THIS PROBLEM. THANKS
You seem to know what you are doing and are doing the right thing. Use 27.02 loader throughout.
Try doing a reset (switch off and on) after 124 factory BIN. Then do user setup and reset again, beofre loading the 207 0r 208 BIN. The do reset and go on to 209 BIN.
Nalin i did just like you suggested and now what it's doing is showing b75 and it keeps rebooting which to me is progress, so now how do i stop it from rebooting and back to normal, i'll be waiting for your feedback. thanks
Try doing a system reset after loading 124. Then do hard reset. Then do user setup, antena setup and scan - it should scan although there won't be any TV. Then do hard reset. Now load the 207 or 208, do a reset. The load the 209 and see if it will come through for a full scan again or show TV without a new scan.
You have an unusual problem. Persistence will pay dividends.
