118.7 Channels missing

 

Bronze Member
Username: Rustynail74

Post Number: 78
Registered: Nov-07
I scanned several times but not getting any H Polarity channels. I am receiving most of the V pol channels though. Could someone help me why that is the case? My LNB says Dp Pro on the back but the cable wire is connected to one LNB only. Dish Network guy installed the larger elliptical 33" dish. Any suggestions?
 

Silver Member
Username: Lomna

Post Number: 515
Registered: Dec-07
HARRIS... I strongly agree with you.
Anyways, It requires larger dish.
 

Gold Member
Username: Plymouth

Canada

Post Number: 7885
Registered: Jan-08
Haris

list your receiver.

Check the LNB Type and put it on OCS-DP or DP.
 

Bronze Member
Username: Rustynail74

Post Number: 80
Registered: Nov-07
My receiver is VS Platinum. I tried using OCS-DP setting. No new channels. Thnx.
 

Gold Member
Username: Plymouth

Canada

Post Number: 7900
Registered: Jan-08
Haris

Unhook and rehook your cables, because it can be a bad connection and you will lose voltage for Horizontal TPs.
I hope you had try LNB Type standard
 

Silver Member
Username: Riconissan

Post Number: 237
Registered: Feb-09
Standard LNB type
and try scanning from a strong TP
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us