|
Silver Member Username: AdrenalyzerPost Number: 105 Registered: Jun-06 | when i DN LD 209 puff bin, when finished, i get night rider lights, a continuous puff flashing, why, how can i fix, i already have puff LZMA bin 204#, so...... hmmm I have P.S 2500a |
|
Platinum Member Username: NydasPost Number: 14529 Registered: Jun-06 | Load 1.03 boot AGAIN and then the LZMA_209. PUFF_LZMA link |
|
Platinum Member Username: NydasPost Number: 14530 Registered: Jun-06 | Adrenalizer: THERE WAS NO PUFF_LZMA_204. It started at 206 or 207 |
|
Silver Member Username: AdrenalyzerPost Number: 106 Registered: Jun-06 | i had 207 |
|
Platinum Member Username: NydasPost Number: 14534 Registered: Jun-06 | There was PUFF_207 and PUFF_LZMA_207 Which one did you have? If it was not LZMA, you have to add Boot 1.03 before installing BIN |
|
Bronze Member Username: Lubfr01Post Number: 96 Registered: Sep-07 | Hi Nalin... I have Fwank 7 Lzma V207F-emu 'Jwh-Team-Puff' Puff ver 103.... Now I started getting scrambled channel message on my FLU converted to Pansat 2700, where to go from here? Tnx Frank |
|
Platinum Member Username: NydasPost Number: 14540 Registered: Jun-06 | 1. Load 1.03 boot AGAIN and then the LZMA_209. Then do user setup and scans. 2. If that does not work, install the original boot b60 using Chancey's special loader, then install 294T Bin, and convert to PUFF and then to PUFF_LZMA, and repeat steps in 1 above. If you do step 2, you are taking a SLIGHT RISK of getting into a deep sleep - only JTAG would wake the receiver up if that happens. The main link for revert to b60 and PUFF conversion is: PUFF link The link for conversion from PUFF to PUFF_LZMA is: PUFF_LZMA link Best of luck. |
|
Bronze Member Username: Lubfr01Post Number: 97 Registered: Sep-07 | As always thanks Nalin [fta bread and butter] Nyda. |
|
Bronze Member Username: Plutoman_srPost Number: 11 Registered: Oct-06 | deserving comment ! |