I have a Panset 2700E and it shows no signal on the screen. When I try to scan the satellites EK7KU and EK3KU it shows 0 programs found. I also tried to do a blind scan and it says 0 transponder found. Everything was working fine until yesterday.
Note down your antenna setup. Do a system reset. Switch off at back and on. Install 207 BIN from http://www.future-fta.info Do user setup Do antenna setup and a blind scan of one sat. Do scan of the other sats.
The possibility of dead capacitors inside cannot be excluded, and if you fail, open the hood and look for the bad caps. Do a google search and you will find plenty of information on this item.
