Hello Nalinbhai i have some question about PUFF bins. Last time i loaded the bin files was Fwank7_Jvvh-Team-PUFF_299.zip so what i want to know what i need to do see the DN again I try to load the current bin that is Fwank7_Jvvh-Team-PUFF_(Lzma)_V207.zip but its not working do i need to convert my receiver???
For those that used the PUFF_VER1.0.1 boot already use this one insteads please. For those who have not used the PUFF_VER1.0.2 boot yet use this one instead also.
If you already use the PUFF_VER1.0.2 boot all you have to do is.
Open UkRoNiC's BOX Updater .421. Loader. Open PUFF_VER1.0.3 bin into Loader. Turn receiver ON and " LET RECEIVER FULLY BOOT UP TO ON or CHANNEL # ". Hit download on Loader.
Write will complete in 10 seconds then receiver will reboot with P.U.F.F P.U.F.F. and come ON and thats it your done. Of course you will have to wait for a new bin to fix the freezing issues.
For those that have not used the PUFF_VER`1.0.2 boot this is what you need to do.
1). Open UkRoNiC's BOX Updater .421. Loader. Open PUFF_VER1.0.3 bin into Loader. Turn receiver ON and " LET RECEIVER FULLY BOOT UP TO ON or CHANNEL # ". Hit download on Loader.
Receiver will reboot with P.U.F.F. P.U.F.F. and will get stuck on " F. ". Turn receiver OFF from back switch. Note that it is P.U.F.F. P.U.F.F. F.
2). Open Jvvh-Team-PUFF Loader or BL Updater 1.4 File, choose Fwank7_Jvvh-Team-PUFF_(Lzma)_V206 bin. Turn receiver ON and soon as you see the " P. ", and before it stops at F., Hit download on Loader.
Write will complete in 2 minutes then receiver will reboot with P.U.F.F P.U.F.F. and come ON and thats it your done
When loading the V207 bin make sure it is the v207bin that has (Lzma) in the bin name or your receiver will get stuck on " F.
The URLs to files is in my next post. I want you to note that you are using two loaders and two files to do two different things - first loading 103 boot and then loading the current BIN.
After loading, unless you have recently saved Channle list, you will need to 1. do user setup 2. Antenna setup 3. Blind Scan one sat. 4. Make sure you see TV - try switching off and on from the back. 5. Blind scan all the other sats. 6. Do parental control and favourites 7. SAVE the channel list, using channel master http://www.sharpc.com
Essential kit 103 for conversion to 103 LZMA boot Kit. This is the new change recommended. Convert to PUFF_LZMA. There will not be any more PUFF PUFF_LZMA_207 BIN in separate file
PUFF_LZMA link Alternative PUFF_LZMA link
Download and unzip into separate directory. PLEASE DO NOT ATTEMPT WITHOUT READING INSTRUCTIONS.