|
Platinum Member Username: NydasPost Number: 13916 Registered: Jun-06 | PUFF_204 flash problem '" Full kit for fixing the problem. Use UKR's Flash Fix. Use at your own risk. Alternative Flash Fix link Download and unzip into separate directory. PLEASE DO NOT ATTEMPT WITHOUT READING INSTRUCTIONS. This is a last resort method |
|
Bronze Member Username: SomokanoPost Number: 37 Registered: Nov-07 | HI nalin NOw after stuck at F forever what shold we do now I have downloaded flash fix and new 2o4 on my comuter what shold i do to fix the problem plese help many of us who are not so good in this area thanks in advance |
|
Platinum Member Username: NydasPost Number: 13918 Registered: Jun-06 | There is an instruction .doc file in the kit. |
|
Silver Member Username: DishloverToronto, Ontario Canad Post Number: 294 Registered: Jun-06 | Thanks NALIN IT WORKED |
|
Bronze Member Username: JawallaOrlando, FL USA Post Number: 35 Registered: Oct-06 | This is the content of that doc. It says nothing about if you are stuck at an "F". What should I do if stuck at an "F"? ----------------------- Flash Fix for conversion boxes -- as posted by UKR ________________________________________ "This file is to be used Only for the Conversion boxes--works like a jtag (with power obviously) but is NOT a jtag file...if you jtag this file on your box as-is ......I do not know what would happen...but I doubt that it would come ON. To start off Use UkRoNiC's BOX Updater .420. or 1.4 works also.... Using Ukr_-PUFF-ConversionFlashFix.bin (1mb) Off/On your box...on first light....hit write and be patient. IF successful write, box should Display 'rolling PUFF'..... at this point using same loader and same Off/On method..". Load in Fwank7_Jvvh-Team-PUFF_V204.bin (448k) when all done....use channel 8282 and set Default Keys. Enjoy |
|
Silver Member Username: JkmagoPost Number: 267 Registered: Nov-07 | Just need two bins and download from Nalin website UKR Flash fix and Fwank 204 PUFF First run UKR Flashfix and wait for PUFF to appear and then switch off and switch on and hit write as soon as p appears and wait for On to appear, do antenna setting and Blind scan Cheers! |
|
Bronze Member Username: JawallaOrlando, FL USA Post Number: 36 Registered: Oct-06 | I run UKR flashfix and now it is stuck at "F". What should do next? |
|
Silver Member Username: JkmagoPost Number: 271 Registered: Nov-07 | Switch off receiver Open BL updater select Bin Fwank 204 switch on receiver and as soon as you see P on receiver hit write and when wait for On to appear on receiver again switch off connect with TV Do Antenna setting Do blind scann ll good Enjoy TV Cheers! |
|
Silver Member Username: JkmagoPost Number: 273 Registered: Nov-07 | Jwala if you have any problem report asap I am here to help you. Just need two bins UKR Flash fix and Fwank 204 PUFF and download from Nalin website Switch off the receiver open BL updater Select UKR Flashfix and switch on receiver and hit write as soon as switch on and wait for Rolling PUFF to appear and when it stops at F then Switch off receiver Open BL updater select Bin Fwank 204 switch on receiver and as soon as you see P on receiver hit write and when wait for On to appear on receiver again switch off connect with TV Do Antenna setting Do blind scan all good Enjoy TV |
|
Bronze Member Username: JawallaOrlando, FL USA Post Number: 37 Registered: Oct-06 | 1. 101 boot file, then 2. Fwank 204 PUFF RESULT: Looping thru reboots 1. UKR Flash fix and 2. Fwank 204 PUFF RESULT: Still Freezing after every 5 mins I did the required hardware and System reset after every step. Pansat 2500 clone. |
|
Silver Member Username: JkmagoPost Number: 276 Registered: Nov-07 | Jawala, Many people including me loaded the way mentioned above and working great for last 7 hours. Do Delete all channels and do system reset Load UKR Flash fix using BL updater and it struck at F again switch off and load Fwank 204 when you see P on receiver and when Receiver shows ON after loading Fwank PUFF204 switch off and connect and do antenna setting and blind scan and working great with no freezing for last 7 hours. If in doubt do the above steps again. No freezing at all. Cheers! |