Nalin
|
Silver Member Username: MrkhanPost Number: 105 Registered: Oct-07 | Hey how do I get the local channels on 61.5 or what to do here? Thanx |
|
Platinum Member Username: NydasPost Number: 13890 Registered: Jun-06 | A blind scan should get all the channels seen by your Dish. |
|
Gold Member Username: PlymouthCanada Post Number: 7015 Registered: Jan-08 | Firoz all locals channels are in HD and i think on N3.  |
|
New member Username: AbouelteemPost Number: 1 Registered: Oct-07 | Hello Nalin I was away for 2 months now since mid november and the latest version of the puff i have downloaded was the jvvh292 I have tried to download the last one jvvh301 when i came back but it started freezing. is there is any new conversion boot from Jvvh? if so where i can find it.if the buff version i am still having is good, then do i have to wait for the new bins? your reply and help are highly appreciated |
|
Platinum Member Username: NydasPost Number: 13892 Registered: Jun-06 | https://www.ecoustics.com/electronics/forum/home-video/544197.html |
|
New member Username: AbouelteemPost Number: 2 Registered: Oct-07 | Thanks Nalin, One more Question 110/119 reads no signal did they change the directions or are they still the same. if they are still the same does this mean that i have a bad swich. Thanks again |
|
Platinum Member Username: NydasPost Number: 13893 Registered: Jun-06 | 110/119 are where they have always been - at 110W and 119W. There could be one of the many problems, but before you start looking at your hardware, try and look at the BIN, antenna settings, etc. |
|
New member Username: AbouelteemPost Number: 3 Registered: Oct-07 | Thanks again for prompt response I will start looking to make sure that the hardware still working fine. i have good quality but no signal!!so i got to go back and check the hardware thanks again |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics