# Adds SD Card capability to many FTA receivers with no SD Card. # Requires +5VDC which can be powered from FTA receivers on some models. Model without external power will require a +5VDC power supply at extra cost. # Easy to install, simply plug into the Serial port on the back of the receiver, and turn unit on # Automatically loads any image that is properly named on the SD Card # Loads new images in less than 2 minutes # Stores multiple firmware images # Red and Green LED's indicate status # Low power requirements # Jumper Selectable For Straight or Null Modem Interface # Supports up to 2GB SD Cards Formatted as FAT
