NEED HELP!!!!!!

 

New member
Username: Hypmind

Post Number: 9
Registered: Jan-09
I have a Fortec Star receiver I have to put in keys manualy is there a site or anyone here that could possibly post the new keys or know where I can go to find the latest keys please and thank you
 

Silver Member
Username: Fakeman1

Germantown, Maryland USA

Post Number: 206
Registered: Jul-08
[link removed]
 

Bronze Member
Username: Hypmind

Post Number: 12
Registered: Jan-09
Seems that the site has keys but seem to be outta date
Thekeys do not work either
 

Platinum Member
Username: Nydas

Post Number: 13791
Registered: Jun-06
Tito:
1. First of all decide whether you have a Pansat 2700 or a Fortec star receiver.
These are two different receivers.
2. If it is Fortec Star, is it Fortec Star Ultra?
3. Keys are generally not required nowadays. You probably need a new BIN.
4. If you are not sure what you have, go into Menu/System, and post EXACTLY what you see.
 

Bronze Member
Username: Hypmind

Post Number: 13
Registered: Jan-09
Ok this is exactly what is says.
X-85BL
API:2.84Ta_EU
Boot ver:07
02.Nov.2006
Future- FTA
Let me know if you can help please and thanks.
 

Gold Member
Username: Dimwitt

Post Number: 1051
Registered: Aug-06
Your fortec was using pansat 2500 clone bins-284T, now it has to converted to use 'Puff bins'

The instructions are here

https://www.ecoustics.com/cgi-bin/bbs/show.pl?tpc=2&post=1492450#POST1492450

and look in full kit 300 puff

BTW - I don't have that receiver , just passing along a little info.
 

Platinum Member
Username: Nydas

Post Number: 13796
Registered: Jun-06
As Tooter said, you have a Fortec Ultra with an old clone BIN 284T.

The URL he pointed out were my instructions in March 2008. Things have changed a bit, and I suggest you download a full PUFF kit from one of the following URLs and after unzipping in a speparate directory, read the Instuctions.doc and print it out.
Follow the instructions explicitly and you will be up and running.


PUFF_300 for FLU/2500 Conversion to 2700
Full kits for Latest conversion BINs and other files - also for Revert to 2500
Remove Channel list before installing


[link removed]

Download and unzip into separate directory.
PLEASE DO NOT ATTEMPT WITHOUT READING INSTRUCTIONS.
Please note, you may need to rescan
 

New member
Username: Joel16

Post Number: 1
Registered: Jan-09
Good Day

I have switched to VS PVR700 I was able to load 122208 but 010908 gets me "no video or audio" VS plat would tell me it was autorolling. I guess the 700 doesn't.

is it me? or a bad BIN?
 

New member
Username: Joel16

Post Number: 2
Registered: Jan-09
By the way. this is not my first post. Just lost changed Email and had to register again.
 

New member
Username: Joel16

Post Number: 3
Registered: Jan-09
pvr7000

legacy quad lnb 1
echo 10,11
lnb freq 11250
22khz off
search all
DiSeqc none
sw42 dish2

echo 7,11
legacy quad lnb 1
echo 10,11
lnb freq 11250
22khz off
diseqc none
sw42 dish 1
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us