Channel 620 and 621 moved !!!!!!!! where did it go

jack smith Silver Member Username: The_devil Post Number: 227 Registered: Aug-07	Posted on Wednesday, January 07, 2009 - 20:19 GMT hi i just got home any noticed that on channel 620(Geo) and 621 (ARY) it sais this channel have been moved but it doesent say where it has been moved doen any1 know where did it go
shiraz Bronze Member Username: Qwertyuu Post Number: 43 Registered: Nov-07	Posted on Wednesday, January 07, 2009 - 20:37 GMT Reboot the reciever and it will be fine. Means turn on/off switch from back of the receiver. QWERTYU .. NAGRA 3 Specialist
FTA TESTER Silver Member Username: Jay_w_grayson Prague, Oklahoma USA Post Number: 236 Registered: Jul-08	Posted on Wednesday, January 07, 2009 - 21:17 GMT jack smith.... Both of these channels are now on at Echo 3 @ 61.5W TPs 12632V and 12326 H Try what shiraz said.
jack smith Silver Member Username: The_devil Post Number: 228 Registered: Aug-07	Posted on Wednesday, January 07, 2009 - 21:40 GMT i did reboot the reciever and did a scan it comes from 2 seconds and then this message starts to come IMPORTANT SERVICE NOOTICED THIS CHANNEL HAS MOVED
jack smith Silver Member Username: The_devil Post Number: 229 Registered: Aug-07	Posted on Wednesday, January 07, 2009 - 21:44 GMT am i the only person with this problem i have captiveworks 600p
FTA TESTER Silver Member Username: Jay_w_grayson Prague, Oklahoma USA Post Number: 238 Registered: Jul-08	Posted on Wednesday, January 07, 2009 - 21:57 GMT jack smith... I will check it out with a captiveworks 600p and get back to you. Btw what bird are you on?
satgrl Gold Member Username: Satgrl Dil Mei DarD a Jaga ... Post Number: 1566 Registered: Oct-07	Posted on Wednesday, January 07, 2009 - 22:44 GMT i have same problem it says channel moved i have sv 4000 and 61.5 where did the channel get moved..anyone?
alton vann penny Silver Member Username: Satopia Post Number: 327 Registered: Feb-08	Posted on Wednesday, January 07, 2009 - 22:45 GMT sounds like the start of n3
satgrl Gold Member Username: Satgrl Dil Mei DarD a Jaga ... Post Number: 1567 Registered: Oct-07	Posted on Wednesday, January 07, 2009 - 22:50 GMT what does that mean nagra 3? what is diffrence are they starting to end fta?lol
Mr. Skullz Silver Member Username: Mrskullz1 Brooklyn, New York Post Number: 976 Registered: Feb-07	Posted on Wednesday, January 07, 2009 - 22:53 GMT i am still getting this channel...i have cw600p
Mc Sunny Gold Member Username: Mc_sunny Post Number: 1353 Registered: Feb-06	Posted on Wednesday, January 07, 2009 - 23:18 GMT Channel Moves: 616 - PTV [MPEG2 SD] moved from EchoStar3 61.5W TP 08 ConUS beam to EchoStar3 61.5W TP 18 ConUS beam (A) 620 - GEOTV [MPEG2 SD] moved from EchoStar3 61.5W TP 29 ConUS beam to EchoStar3 61.5W TP 18 ConUS beam (A) (H) 621 - ARYDI [MPEG2 SD] moved from EchoStar3 61.5W TP 08 ConUS beam to EchoStar3 61.5W TP 18 ConUS beam (A) (H) 622 - APUNJ [MPEG2 SD] moved from EchoStar3 61.5W TP 10 ConUS beam to EchoStar3 61.5W TP 18 ConUS beam (A) 651 - ARYOW [MPEG2 SD] moved from EchoStar3 61.5W TP 31 ConUS beam to EchoStar3 61.5W TP 18 ConUS beam (A) (H) 903 - AAGTV [MPEG2 SD] moved from EchoStar3 61.5W TP 31 ConUS beam to EchoStar3 61.5W TP 18 ConUS beam (A) 7097 - WHME [MPEG4 SD] moved from Echostar12 61.5W TP 09 Area 4 beam to Echostar12 61.5W TP 05 Area 4 beam (A) (H)(South Bend, IN) 9130 - WNGS [MPEG2 SD] moved from EchoStar10 110W TP 29 Spotbeam 09 to EchoStar10 110W TP 27 Spotbeam 09 (A) (H)(Springville, NY) 9144 - KXVO [MPEG2 SD] moved from EchoStar10 110W TP 20 Spotbeam 24(KS,MN,IA,OH,NE) to EchoStar10 110W TP 31 Spotbeam 24(KS,MN,IA,OH,NE) (A) (H)(Omaha, NE) 15236 - KXVO2 [EPG] moved from EchoStar10 110W TP 20 Spotbeam 24(KS,MN,IA,OH,NE) to EchoStar10 110W TP 31 Spotbeam 24(KS,MN,IA,OH,NE) (NA)(Omaha, NE)
Plymouth Gold Member Username: Plymouth Canada Post Number: 6857 Registered: Jan-08	Posted on Wednesday, January 07, 2009 - 23:56 GMT After many scan and test on Echo3 with my CW, Dn do many change you must wait until it complete and do a blind scan then a autoscan then delete all channels when asked for get it.
shiraz Bronze Member Username: Qwertyuu Post Number: 44 Registered: Nov-07	Posted on Thursday, January 08, 2009 - 00:21 GMT Reboot it and than leave on same channel for 1 minute, than start changing the channel. Qwertyu .... Nagra 3 Specialist
Shiraz -- Nagra 3 Specialist Bronze Member Username: Qwertyuu Post Number: 45 Registered: Nov-07	Posted on Thursday, January 08, 2009 - 00:24 GMT Reboot it and than leave on same channel for 1 minute, than start changing the channel. Qwertyu .... Nagra 3 Specialist :-)
Plymouth Gold Member Username: Plymouth Canada Post Number: 6860 Registered: Jan-08	Posted on Thursday, January 08, 2009 - 00:30 GMT JOKE?
Nalin Nyda Platinum Member Username: Nydas Post Number: 13764 Registered: Jun-06	Posted on Thursday, January 08, 2009 - 00:33 GMT 61.5W (Echo 3) 12632 V 12326 H Do a TP scan. On Captive works, make sure you have your auto TP off.
Plymouth Gold Member Username: Plymouth Canada Post Number: 6862 Registered: Jan-08	Posted on Thursday, January 08, 2009 - 00:41 GMT Thanks Nalin!
Dizasta Silver Member Username: Dizasta USA Post Number: 146 Registered: Nov-06	Posted on Thursday, January 08, 2009 - 00:44 GMT how about Sonic View Elite SV-60 PVR.
Nalin Nyda Platinum Member Username: Nydas Post Number: 13766 Registered: Jun-06	Posted on Thursday, January 08, 2009 - 00:46 GMT You should get it on SV360. I can only test a SV4000 and it is working there. No harm in keeping autoTP off and trying a rescan of the relevant TPs.
Dizasta Silver Member Username: Dizasta USA Post Number: 147 Registered: Nov-06	Posted on Thursday, January 08, 2009 - 00:48 GMT OK it worked after deleting all the channels. And then AUTO TP > OFF and rescanned the channels. Every channel is working rite now.
Plymouth Gold Member Username: Plymouth Canada Post Number: 6864 Registered: Jan-08	Posted on Thursday, January 08, 2009 - 01:27 GMT I confirm, it work with Auto Tp Off
Shiraz -- Nagra 3 Specialist Bronze Member Username: Qwertyuu Post Number: 46 Registered: Nov-07	Posted on Thursday, January 08, 2009 - 01:49 GMT It worked for every channel. Its same like a hard reboot and have that channel for 1 minute than start changing channel. Hey nalin probably you can answere this Channel 903 AAG is not working with Auto TP off and rescan, even with hard boot. Qwertyu .... Nagra 3 Specialist :-)
Nalin Nyda Platinum Member Username: Nydas Post Number: 13768 Registered: Jun-06	Posted on Thursday, January 08, 2009 - 02:46 GMT 61.5W (Echo 3) AAG - 905 - TP 12661 V Working fie. Might come is as Prog 903
Freedom of the Press Bronze Member Username: White_girl Post Number: 56 Registered: Sep-08	Posted on Thursday, January 08, 2009 - 10:34 GMT FTA TESTER Silver Member Username: Jay_w_grayson Prague, Oklahoma USA Post Number: 236 Registered: Jul-08 Posted on Wednesday, January 07, 2009 - 04:17 pm: -------------------------------------------------------------------------------- jack smith.... Both of these channels are now on at Echo 3 @ 61.5W TPs 12632V and 12326 H Try what shiraz said. Nalin Nyda Platinum Member Username: Nydas Post Number: 13764 Registered: Jun-06 Posted on Wednesday, January 07, 2009 - 07:33 pm: -------------------------------------------------------------------------------- 61.5W (Echo 3) 12632 V 12326 H Now I see how you got the name C/P FTA TESTER answer at 4:17 pm: Nalin Nyda answer 7:33 pm: Plymouth Gold Member Username: Plymouth Canada Post Number: 6860 Registered: Jan-08 Posted on Wednesday, January 07, 2009 - 07:30 pm: -------------------------------------------------------------------------------- JOKE? You two are the only JOKE here
Tooter Gold Member Username: Dimwitt Post Number: 1032 Registered: Aug-06	Posted on Thursday, January 08, 2009 - 11:48 GMT The simple answer for cw600 would be to have auto tp on and let it get the channel for you.- cw has functioning auto tp. Also, theres no reason to turn auto tp off to do any type of scan.
Omar Sharif Bronze Member Username: Post_man Post Number: 71 Registered: Nov-07	Posted on Thursday, January 08, 2009 - 14:25 GMT Tooter CaptiveWorks CW-600 Premium Why does a Prog. with the channel number shows on the channel guide in place of the name of the channel? Also how to you scan a TP using Video PID and Audio PID?
Nalin Nyda Platinum Member Username: Nydas Post Number: 13771 Registered: Jun-06	Posted on Thursday, January 08, 2009 - 14:49 GMT Tooter: The CaptiveWorks Database has problems. In a 88s, I struggled for 2 hours trying to scan 118 and 119, and every time all the channels came in and as soon as I tried to watch regularly, in a flash everything disappeared, i.e. the channel names etc were there but strange TP numbers appeared and even Echo1,2 name appeared. Finally I went into another forum, and discovered that many persons had a similar problem ad it was solved immediately by turning autoTP off and scanning. In the 2700s and 2500 to 2700 convert and before that in 2500s, the same advice was given - turn autoTP off. The proof of the pudding is in the eating and it works with autoTP off. Therefore, there is no need to theorise.
Plymouth Gold Member Username: Plymouth Canada Post Number: 6871 Registered: Jan-08	Posted on Thursday, January 08, 2009 - 15:19 GMT Tooter you are wrong! Auto Tp OFF work on CW Pansat and SV Many channels come on 2 Tp and Cw keep the last channel selected. With Tp OFF autoscan give 2 channels #620 GEOTV with display who give channel are moved and Prog 620 which is the good channel.
Tooter Gold Member Username: Dimwitt Post Number: 1033 Registered: Aug-06	Posted on Thursday, January 08, 2009 - 17:48 GMT It does appear that the channels above need to have the auto tp off in order to remain on those channels with the cw. pansat doesn't have auto tp anymore - omar, to scan the tp with apid and vpid - installation, manual search and advanced...
Plymouth Gold Member Username: Plymouth Canada Post Number: 6874 Registered: Jan-08	Posted on Thursday, January 08, 2009 - 18:01 GMT Tooter Gold Member Username: Dimwitt Post Number: 1034 Registered: Aug-06 Posted on Thursday, January 08, 2009 - 12:52 pm: Edit Post It does appear that the channels above need to have the auto tp off in order to remain on those channels with the cw. pansat doesn't have auto tp anymore - omar, to scan the tp with apid and vpid - installation, manual search and advanced... Sorry Plymouth I,m wrong again and you are right
Shiraz -- Nagra 3 Specialist Bronze Member Username: Qwertyuu Post Number: 49 Registered: Nov-07	Posted on Thursday, January 08, 2009 - 19:39 GMT What ever you do like Auto TP OFF,than delete all channels than scan it. OR Reboot it means switch on and off from back will not solve this problem. OR Loading new files of Viewsat any model and do both the above mention stuff is not going to solve the proble. NOW THE NEW Status is that all these channels where there is a message appear"channels Moved" you can find all those channels from channel 6110 - 6111. ENJOY
Tooter Gold Member Username: Dimwitt Post Number: 1034 Registered: Aug-06	Posted on Thursday, January 08, 2009 - 20:30 GMT plymutt the clown
Plymouth Gold Member Username: Plymouth Canada Post Number: 6876 Registered: Jan-08	Posted on Thursday, January 08, 2009 - 23:35 GMT Tooter Gold Member Username: Dimwitt Post Number: 1034 Registered: Aug-06 Posted on Thursday, January 08, 2009 - 12:52 pm: Edit Post It does appear that the channels above need to have the auto tp off in order to remain on those channels with the cw. pansat doesn't have auto tp anymore - omar, to scan the tp with apid and vpid - installation, manual search and advanced... Sorry Plymouth I,m wrong again and you are right
mustana Bronze Member Username: Mustana70 Wenonah, New Jersey USA Post Number: 18 Registered: Jan-08	Posted on Thursday, January 08, 2009 - 23:44 GMT After the new bins, try this. Do a factory default, then do an auto scan for all ur birds. The channels you r looking for are moved to 6101 6102 and so on. Hope this helps.
Tooter Gold Member Username: Dimwitt Post Number: 1041 Registered: Aug-06	Posted on Friday, January 09, 2009 - 00:13 GMT Thank you, that will help, normally if a channel changes transponders the auto tp will find the new transponder - now if it is assigned new channel numbers thats different. plymutt, you know you made-up that 1034 post.
S New member Username: Inswinger Post Number: 1 Registered: Jan-09	Posted on Friday, January 09, 2009 - 00:34 GMT Hey fellas Can some one post step-by-step directions as to how to get these channels back? What tp, etc? Thanks in advance.
Tooter Gold Member Username: Dimwitt Post Number: 1044 Registered: Aug-06	Posted on Friday, January 09, 2009 - 01:12 GMT referencing mustana's post, scan the sat and look at channels 6101 6102 and so on. Hope this helps.
Ace New member Username: Inswinger Post Number: 3 Registered: Jan-09	Posted on Friday, January 09, 2009 - 01:14 GMT SO when I scan the sat does it matter what TP i am on?
Tooter Gold Member Username: Dimwitt Post Number: 1045 Registered: Aug-06	Posted on Friday, January 09, 2009 - 01:30 GMT normally a satellite scan will start with the first tp.
Nalin Nyda Platinum Member Username: Nydas Post Number: 13778 Registered: Jun-06	Posted on Friday, January 09, 2009 - 02:51 GMT 1. Turn auto TP off 2. In your list of TPs, stay on the TP you want to scan. 3. Do a TP scan Some receiver will let you go iteractive and you come down to the TP you want to scan and scan it. This is not high tech stuff, but just point and click.
WartHog Bronze Member Username: L_k_live_s POST: 100 mi... Post Number: 21 Registered: Jan-09	Posted on Friday, January 09, 2009 - 02:57 GMT Thats good info rose bud
Tooter Gold Member Username: Dimwitt Post Number: 1049 Registered: Aug-06	Posted on Friday, January 09, 2009 - 02:57 GMT BLAH.. BLAH..BLAH...
Plymouth Gold Member Username: Plymouth Canada Post Number: 6886 Registered: Jan-08	Posted on Friday, January 09, 2009 - 03:00 GMT Tooter Gold Member Username: Dimwitt Post Number: 1034 Registered: Aug-06 Posted on Thursday, January 08, 2009 - 12:52 pm: Edit Post It does appear that the channels above need to have the auto tp off in order to remain on those channels with the cw. pansat doesn't have auto tp anymore - omar, to scan the tp with apid and vpid - installation, manual search and advanced... Sorry Plymouth I,m wrong again and you are right
Tooter Gold Member Username: Dimwitt Post Number: 1050 Registered: Aug-06	Posted on Friday, January 09, 2009 - 03:07 GMT Plymutt, You and I know its BS.
lakh Silver Member Username: Kingofdakingz Post Number: 401 Registered: Jun-06	Posted on Friday, January 09, 2009 - 12:17 GMT my ZEE PUNJABI don't work it says this channel has moved. which freq i have to scan to bring the channel back?
lakh Silver Member Username: Kingofdakingz Post Number: 402 Registered: Jun-06	Posted on Saturday, January 10, 2009 - 14:21 GMT its ok i reloaded the bin again and its working
jeet Bronze Member Username: Toronto_jatt OntarioCanada Post Number: 19 Registered: Jun-06	Posted on Saturday, January 10, 2009 - 14:26 GMT guys try looking beyond ch 6101 onwards thats where all these channels are moved.
Ace New member Username: Inswinger Post Number: 4 Registered: Jan-09	Posted on Saturday, January 10, 2009 - 14:33 GMT I just did an auto scan on 61.5 with auto tp on and got all the channels back.
AK AK Bronze Member Username: Ak2011 Post Number: 50 Registered: Oct-07	Posted on Saturday, January 10, 2009 - 16:36 GMT How do u change the auto tp on viewsat ultra?? My channels have also moved.
Plymouth Gold Member Username: Plymouth Canada Post Number: 6921 Registered: Jan-08	Posted on Saturday, January 10, 2009 - 23:01 GMT AK AK User Setting,Opton2 then Auto TP and select off.
tamara New member Username: Walowa18 Post Number: 1 Registered: Jan-09	Posted on Sunday, January 11, 2009 - 02:21 GMT can some one help me ? i lost ch 607 on 61.5 i want my channel back
tamara New member Username: Walowa18 Post Number: 3 Registered: Jan-09	Posted on Sunday, January 11, 2009 - 02:36 GMT I lost polsat 2 ch607 on 61.5 can someone help me, Please Help. Thank You
Plymouth Gold Member Username: Plymouth Canada Post Number: 6930 Registered: Jan-08	Posted on Sunday, January 11, 2009 - 02:41 GMT Tamara Echo 3 #607 Tp 12632 20000 V 3/4 v4642 a4643 p4642. tell me the picture you see on this channels?
tamara New member Username: Walowa18 Post Number: 5 Registered: Jan-09	Posted on Sunday, January 11, 2009 - 02:49 GMT there is a picture but it is frozen,
tamara New member Username: Walowa18 Post Number: 6 Registered: Jan-09	Posted on Sunday, January 11, 2009 - 02:50 GMT It looks like a cemetery,
Plymouth Gold Member Username: Plymouth Canada Post Number: 6932 Registered: Jan-08	Posted on Sunday, January 11, 2009 - 02:53 GMT OK i see that picture too, after auto Tp off and a autoscan i have recovered many channels but this channels seems to be out service for now.
tamara New member Username: Walowa18 Post Number: 7 Registered: Jan-09	Posted on Sunday, January 11, 2009 - 02:59 GMT That used to be a Polish ch Polsat 2, Today,2 hours ago they changed it to channel Link ,Do you think Polsat 2 is gone?
Plymouth Gold Member Username: Plymouth Canada Post Number: 6933 Registered: Jan-08	Posted on Sunday, January 11, 2009 - 03:03 GMT ? I don't know, i can try a blind scan and come back with the result.
tamara New member Username: Walowa18 Post Number: 9 Registered: Jan-09	Posted on Sunday, January 11, 2009 - 03:07 GMT Please if You can Thank You
Plymouth Gold Member Username: Plymouth Canada Post Number: 6935 Registered: Jan-08	Posted on Sunday, January 11, 2009 - 03:53 GMT Tamara Sorry I can't get Polsat2 on a new scan.

« Previous Thread Next Thread »

Channel 620 and 621 moved !!!!!!!! where did it go

Main Forums

Forum Help

Follow Us