Viewsat ultra echostar 3

ARUN SAHNI New member Username: Asahni Post Number: 1 Registered: Dec-08	Posted on Monday, December 29, 2008 - 01:33 GMT I am trying to set up echostar 3 in my Viewsat Ultra but on Antenna Setup it is showing as Nimiq 1,3 91.0 W. My Echostar is not working even after having 78% Blue signals and 75 % yellow signals. My settings are Satellite Echostar 3 61.5W LNB Power ON LNB type Standard LNB Frequency 11250 22KHz Off TP Freq. 12297 DiSEqC 1.0 port 3 Motor Off Legacy SW None Please let me know what should I do to get Echostar 3. My Channels say AutoRoll Processing and under that Nimiq 1,3 91.0W
Plymouth Gold Member Username: Plymouth Canada Post Number: 6720 Registered: Jan-08	Posted on Monday, December 29, 2008 - 01:36 GMT Arun Set TP Freq to 12384, realign your dish for get 61.5W
Asahni New member Username: Asahni Post Number: 2 Registered: Dec-08	Posted on Monday, December 29, 2008 - 01:42 GMT I have two dish, one set for 91.0W and other for 61.5 W. How do I switch to 61.5W from 91.0W in setting as I can not see 61.5W in Antenna setup
Plymouth Gold Member Username: Plymouth Canada Post Number: 6721 Registered: Jan-08	Posted on Monday, December 29, 2008 - 01:47 GMT Asahni If you get Bev 91 on port 3, try another port with Tp on 12384 and see if Echo 3 is there.
Asahni New member Username: Asahni Post Number: 3 Registered: Dec-08	Posted on Monday, December 29, 2008 - 01:48 GMT Also when I change the TP freq. and then exit that screen it won't save the freq. that I have changed
Asahni New member Username: Asahni Post Number: 4 Registered: Dec-08	Posted on Monday, December 29, 2008 - 01:51 GMT I cant find Echo 3 when i change the port.}}
Asahni New member Username: Asahni Post Number: 5 Registered: Dec-08	Posted on Monday, December 29, 2008 - 01:52 GMT I cant find Echo 3 when i change the port}}
Asahni New member Username: Asahni Post Number: 6 Registered: Dec-08	Posted on Monday, December 29, 2008 - 01:53 GMT Could it be that my LNB plug is bad}
Plymouth Gold Member Username: Plymouth Canada Post Number: 6722 Registered: Jan-08	Posted on Monday, December 29, 2008 - 02:00 GMT Asahni You select the port which 61.5W LNB is hook on your switch.
Asahni New member Username: Asahni Post Number: 7 Registered: Dec-08	Posted on Monday, December 29, 2008 - 20:32 GMT Still not working
Plymouth Gold Member Username: Plymouth Canada Post Number: 6729 Registered: Jan-08	Posted on Monday, December 29, 2008 - 22:16 GMT Asahni Go in Menu, System information, receiver information then give all info there Bootloader? Main S/W? Satellite? H/W Version? ModelName? Checksum check? Graphic Sys?

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us