Instruction to install a 8psk board into a viewsat Max hd receiver

 

New member
Username: W170lee

Milpitas, Ca USA

Post Number: 1
Registered: Dec-08
Hi all,

Do u guys know where I can find the obove info?

Tks
 

Gold Member
Username: Plymouth

Canada

Post Number: 6516
Registered: Jan-08
Open your box.
You will need to remove the current tuner module of the VS MAXHD.

When removing the Tuner module be careful not to bend the 4 pins in the corner. These are guide pins used to help guide the Add-on Module into place.

After you installed the Add-on Module go to Menu > System Information > Receiver Information
You should see the Optional Tuner Found. You can now scan your satellites to pick up Turbo 8psk channels.

Be sure your hear click when you install the module.
 

Gold Member
Username: Plymouth

Canada

Post Number: 6517
Registered: Jan-08
You must do a factory default and load this file for activate the SK-200

PFTAHDMSW_08_12_06HM

Now autoscan all satellites one by one then load the latest bin file.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us