the other option is fwanky7, but you have to rescan the chanals after load the bin, both bins are the same. they erase your setting, you write your settings before load the bin, ,
When loading is complete Switch off the box from back as soon as you see P and do not wait for channel # to appear on box.
Loaded Tronics about 6 hours ago and it is working fine with no problem and also did not do factory reset before loading all channel were there. No need to do rescanning.
I don't like, have that ways, everytime that you turn off the receivers or it turn off by himselef everythings is lost, I am talking about tronics bin, I will try Fwanky now, I do this just for know about puff bins
makaveli, after the ch, comes on, you have tu turn off(back switch) after the reboot ,will show ON, then press OK for the epg to load, and do not turn off the receiver again because everything will be gone,
