I have a pansat 2700a I did factory reset ..loaded bin 124...put in b75 v201 and tryed to put in settings I'm lost on this and read up on this also..can someone please help me with this..what are the right settings for this
Nemo Maritime: If you have genuine Pansat 2700A, you should download the latest v201 BIN for your receiver from http://www.future-fta.info You may need to do a fresh scan or you may need to first install the 124 factory BIN, and then install the 201 BIN. If you know your Antenna settings, fine otherwise write them down for use after installing the new BIN.
nalin is correct, I loaded factory 124, then hit factory reset so just choose language option available, then v201 bin select language, blind scan echo7, blind scanned echo8.10, any others you may have and all is well
"nalin is correct, I loaded factory 124, then hit factory reset so just choose language option available, then v201 bin select language, blind scan echo7, blind scanned echo8.10, any others you may have and all is well"
Do you mean that you loaded factory bin 124 then hocked it up and did a factory reset? then after that you loaded bin 201 then you did you scans? PLEASE LET ME KNOW!
I loaded factory bin, but a couple channels still showed up in my list, so i did factory reset so the only thing was choose language, i did not choose language yet, i then loaded 201, now i did this with mine hooked up completely, but my guess is if you must disconnect to do this, the factory reset must be done before 201, i hope that answers you
Can someone post just the link to the 124 download file - the file itself? I already registered with them but I'm having trouble getting to the file download page, it says I'm not allowed. So if someone gets to the button that says "download" or whatever, copy the link to the file, so that we can download it.
