How to Install New Receiver?

Vicente Prema Bronze Member Username: Laguna Post Number: 18 Registered: Apr-08	Posted on Friday, December 05, 2008 - 20:06 GMT I ordered a new receiver(conaxat) and need basic install help. Do I just replace the old dish network receiver with the new receiver and replace the splitter switch and I should be good to go? Thanks for your help.
devin Silver Member Username: Lomna Post Number: 416 Registered: Dec-07	Posted on Friday, December 05, 2008 - 20:35 GMT You bought ur rec very very late. They are going to be dead within days my friend !
Mohamad Obama Silver Member Username: Mohamad_obama Terhan, Iran Iran Post Number: 238 Registered: Oct-08	Posted on Saturday, December 06, 2008 - 01:00 GMT Go to a site where you can get help and read, read read. You won't get step by step here.
Plymouth Gold Member Username: Plymouth Canada Post Number: 6214 Registered: Jan-08	Posted on Saturday, December 06, 2008 - 01:04 GMT Vicente We can help you here don't listen this Mohamad Obama, he is a troublemaker. Yes you can replaced the existant Dn receiver for the CNX Is it the first receiver you buy? What you want know and which satellites you want get?
justforhaha's Gold Member Username: Justforhahas Post Number: 1472 Registered: Jul-08	Posted on Saturday, December 06, 2008 - 01:30 GMT For Conaxsat info, use their best unofficial home site...they have all the CNX experts, guides, videos, manuals, files, and chat.. [link removed]
Nalin Nyda Platinum Member Username: Nydas Post Number: 13409 Registered: Jun-06	Posted on Saturday, December 06, 2008 - 02:33 GMT Mohamad Obama and justforhaha's are trouble makers. Get help from Plymouth.
zulu Gold Member Username: Runnerguy Pluto Post Number: 1687 Registered: Sep-06	Posted on Saturday, December 06, 2008 - 02:49 GMT
Plymouth Gold Member Username: Plymouth Canada Post Number: 6220 Registered: Jan-08	Posted on Saturday, December 06, 2008 - 03:26 GMT Zulu Are you g.a.y? Cause i'm not, i prefer girl, you lose your time with me, try with jjgee.
The Coders Gold Member Username: The_coders Post Number: 1542 Registered: Jan-08	Posted on Saturday, December 06, 2008 - 04:01 GMT
zulu Gold Member Username: Runnerguy Pluto Post Number: 1688 Registered: Sep-06	Posted on Saturday, December 06, 2008 - 04:02 GMT
Vicente Prema Bronze Member Username: Laguna Post Number: 19 Registered: Apr-08	Posted on Saturday, December 06, 2008 - 18:26 GMT Getting all the dish channels and Indian from DN pay service. So, I think I will need 148, 110, and 121 satellites. My basic question is should I be able to just replace the receivers or is there some other tweaking required? Thx.
Plymouth Gold Member Username: Plymouth Canada Post Number: 6223 Registered: Jan-08	Posted on Saturday, December 06, 2008 - 20:12 GMT Vincente Where are you located? (state) If you have a Dp switch and a Dn dish, you can get channels. Which LNB is on your dish?
justforhaha's Gold Member Username: Justforhahas Post Number: 1479 Registered: Jul-08	Posted on Saturday, December 06, 2008 - 20:23 GMT You must configure/input your FTA antenna/dish receiver settings to exactly which hardware (switches in use, which switch ports are in use, LNB types, sats/lnb's aimed at, etc) ...the same EXACT way Dishnet has your roof dish configured and set up... You will need to climb the roof and take a look, at a minimum. This is NOT Plug N Play..
FTA TESTER Silver Member Username: Jay_w_grayson Prague, Oklahoma USA Post Number: 138 Registered: Jul-08	Posted on Saturday, December 06, 2008 - 21:45 GMT
The Coders Gold Member Username: The_coders Post Number: 1555 Registered: Jan-08	Posted on Saturday, December 06, 2008 - 21:55 GMT LK is , she luvs little boys doncha alkie
greg raf Gold Member Username: Gregraf Post Number: 1707 Registered: Dec-07	Posted on Saturday, December 06, 2008 - 23:00 GMT Don't you think Nalin looks a little funny?

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us