Can anyone solve Pansat3500 Scrambled Channel issue
|
Bronze Member Username: JagsaPost Number: 16 Registered: Dec-07 | Hi Everyone, I have done this request earlier. I got replies from Nalin The chosen one , plymoth, Albino midget and all those who replied , I thank for the replies. Here is my problem again: I am trying to see Hindi/Indian channels and PPV(Vu) channels I have a 33'' Dish for Bell ExpView My Settings are as follows; Echo 8.1; LNB Std LNB Local Freq 11250 DisEqC 1.0#3 TP 1 12224 Positioner Disable Sat Scan ALL For Echo 7: LNB Std LNB Local Freq 11250 DiscEqC 1.0#3 Tp 91) 12225 V 20.000 Positioner Disable Sat Scan ALL} I have loaded bin 302, 303 , 402 and the latest 304 as well today. I did a sat scan of each on e individually for Echo 7, echo 8.1 and Anik 3. The only cahnnel I could view was MOV , which is not what I need to view. The dish has a twin LNB for 119/110W The azimuth from sat calculator are good. The level and quality are 81% and 93% . Despite all this the channels are Scrambled. Help me solve the puzzle if anyone can! |
|
|
Gold Member Username: PlymouthCanada Post Number: 5907 Registered: Jan-08 | jags Set your LNB Type on OCS-DP(DP) and reply with the result  |
|
|
Silver Member Username: MzakcatPost Number: 105 Registered: Aug-05 | I am unfamiliar w bell dish but are the DiscEqC 1.0#3 both supposed to be#3? | |
|
Silver Member Username: Tgyoung1Illinois U.s.a. Post Number: 130 Registered: Jul-06 | one lnb should be #1 and the other lnd #2 | |
|
Bronze Member Username: JagsaPost Number: 17 Registered: Dec-07 | Thanks Plymouth and Terry, There is no options of OCS-DP(DP) in the menu of LNB type. The only options available are Std, Universal 1 and 2 Single and Single SH. When I move from these the Quality level falls to zero. I tried to get the signal by scrolling down the available TP's but with no result i.e., no improvement in the quality. Terry I have Changed one of the sat's to #3 and the other to #2 as directed, the signal strength did not go too bad and now I am running a sat scan again of Anik3 to see if any success. Thanks and please keep in touch. |
|
|
Bronze Member Username: JagsaPost Number: 18 Registered: Dec-07 | soory I forgot to thank Zak | |
|
Platinum Member Username: NydasPost Number: 13219 Registered: Jun-06 | If you have DP 500 + or DP 1000 + Dish AND Dishpro special LNB for 118 and 119 like this. Connect the 119 outlet to DisEqC 1. Connect the 110 outlet to DisEqC 2. Connect the 118.7 outlet to DisEqC 3 or 4. For Echo 7 (119W): LNB Std or DSC-DP LNB Local Freq 11250 DiscEqC 1.0#1 TP 1: 12225 V or 12239 H , SR 20000 Positioner Disable Sat Scan ALL or Blind Scan For Echo 8,10 or 10,11 (110W): LNB Std or DSC-DP LNB Local Freq 11250 DiscEqC 1.0#2 TP 1: 12224 V or 12239 H , SR 20000 Positioner Disable Sat Scan ALL or Blind Scan For Anik 3 or Anik 1 (118.7W): (ignore what your receiver says about Anik 1) LNB Std or DSC-DP or Universal 2 LNB Local Freq 10750 (low 9750) DiscEqC 1.0#3 or 4 TP 1: 11715 V ,SR 20000 Positioner Disable Sat Scan ALL or Blind Scan |
|
|
Platinum Member Username: NydasPost Number: 13220 Registered: Jun-06 | <b>If you have 33' AND Dishpro special LNB for 118 and such as CB2008A Digiwave DGL1189s <b> Connect the 118/119 outlet to DisEqC 1. Connect the 110 outlet to DisEqC 2. Set up Anik 3 slate or Anik 1 slate as (ignore what your receiver says about Anik 1) For Anik 3 (118.7W): LNB Std or Universal 2 LNB Local Freq 10750 (low 9750) DiscEqC 1.0#1 TP 1: 11715 V ,SR 20000 Positioner Disable Sat Scan ALL or Blind Scan For Echo 7 (119W): LNB Std LNB Local Freq 11250 DiscEqC 1.0#1 TP 1: 12224 V or 12239 H , SR 20000 Positioner Disable Sat Scan ALL or Blind Scan For Echo 8,10 or 10,11 (110W): LNB Std or DSC-DP LNB Local Freq 11250 DiscEqC 1.0#2 TP 1: 12224 V or 12239 H , SR 20000 Positioner Disable Sat Scan ALL or Blind Scan |
|
|
Platinum Member Username: NydasPost Number: 13221 Registered: Jun-06 | Some generic LNBs designed for 118.119 will also scan using LNB freq 11250 if you do Blind scan, but the TPs that it finds will have different numbers. The advantage is that you will get all of 118 and 119 with one scan, but when I was testing, I had to scan 3 time before I got this and I do not recommend it. | |
|
Bronze Member Username: JagsaPost Number: 19 Registered: Dec-07 | OK Nalin I have the set as in the first instruction. The problem when I set up Echo7 at DiscEqc at 1.0#1 the signal quality falls to zero and despite that I went on to adjust the position of the dish and no matter what direction the signal quality would not come up. So I went back to set up Echo 7 at 1.0#2 and got the signal back but on scanning I am back to square oneScarambled channel. Now I ahve loaded the latest flie released on nov 20 at the fta site and will try again as you said. Do Keep in touch please |
|
|
Gold Member Username: PlymouthCanada Post Number: 5912 Registered: Jan-08 | Jags Are you able to get Vertical and horizontal signals? Check your channels info and reply. If you get only Vertical, try without switch, if it not work again try a new cable. |
|
|
Platinum Member Username: NydasPost Number: 13222 Registered: Jun-06 | Have you got the connections, i.e. the physical connection to switch as I have suggested? Connect the 119 outlet to DisEqC 1. Connect the 110 outlet to DisEqC 2. Connect the 118.7 outlet to DisEqC 3 or 4. If they are different, it is still OK, as long as you know whichis connected to what. Also scan 118,7 first on a separate slate, then 119 on Echo 7 slate and then 110. |
|
|
Platinum Member Username: NydasPost Number: 13223 Registered: Jun-06 | You said you have as per my first set of instructions. check against this.
|
|
|
Bronze Member Username: JagsaPost Number: 20 Registered: Dec-07 | Nalin I guess i gave you the wrong info. So here is what I have done without success so far to eliminate the confusion. I have deleted all the channels and have set up Echo 7 on DisEqC 1.0#3 I have Level of 80% and Quality of 90%. I am sat scanning only Echo 7 |
|
|
Bronze Member Username: JagsaPost Number: 21 Registered: Dec-07 | I have interrupted the Echo7 sat scan at 23% and waited to load and save. I got the following channels 71- TV71 : 84-HSTDv ; 149- CPA; 220-A-lon . All of them Scrambled or bad channel Now I am losing hope to fix the problem. See if you guys can do something for me. |
|
|
Bronze Member Username: JagsaPost Number: 22 Registered: Dec-07 | Plymouth as suggested I have done a direct connection without the switch as well. The signal level and Quality are 80% and 90%. Still the Scrambled or bad channel I am wondeering that is the latest bin on fta-info site correct or the problem lies in the bin itself? Any suggestions! |
|
|
Silver Member Username: SatopiaPost Number: 285 Registered: Feb-08 | 304 bin out for 3500 freeze fixed @ |
|
|
Bronze Member Username: JagsaPost Number: 23 Registered: Dec-07 | Thanks Alton What is the difference between the files with api_nocard and the ones ending in ...FEmu I think I am doing something wrong in loading the bin to the receiver, here's how I do it: I run the X05 loader and drag the file from the fta site, let the download complete flash and connect the receiver back to the TV. On turning on the receiver pansat3500, from the back normally the screen would read Wait for picture, I wait some times the percentage goes to upto 700 and then the channels will be visualized on their own, but I am unable to get the channels since the F_Emu bins are showing up on the Fta sites. Kindly guide if this is the blunder I am doing to get Scrambled Channel info ? |
|
|
Gold Member Username: MrrasecPost Number: 1259 Registered: Jul-06 | jags, wait for keys! maybe pansat 3500 not show a message "wait for picture", my friend had that problem! |
|
|
Bronze Member Username: JagsaPost Number: 24 Registered: Dec-07 | Thanks Now I have never put in keys. Could some one walk me through how to do that and where to get the keys from |
|
|
Bronze Member Username: TooterPost Number: 54 Registered: Oct-08 | https://www.ecoustics.com/electronics/forum/home-video/392414.html tvkeys.com |
UploadMain Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics