1. Home
    2. >
  2. Forum
    3. >
  3. Home Video Forum
    4. >
  4. Satellite TV Forum
    5. >
  5. Archived Satellite TV Threads Forum
    6. >
  6. Archive through November 04, 2008 Forum
    7. >

PANSAT 2500A PROBLEM WITH B-75

 

lakh
Silver Member
Username: Kingofdakingz

Post Number: 348
Registered: Jun-06
Posted on   
I just found in the garage a pansat 2500a which was converted into b-75. and if i want to convert into puff how would i do that. i tried so much but it stops at NUMBER 5 AND DOES NOT SAYS "ON" after
 

lakh
Silver Member
Username: Kingofdakingz

Post Number: 356
Registered: Jun-06
Posted on   
i have 2 of them one worked and one didnt i tried the same thing with the other that didnt worked but didn't worked
 

Nalin Nyda
Platinum Member
Username: Nydas

Post Number: 12693
Registered: Jun-06
Posted on   
You should do a revert to 2500 using Chancy's special loader and b60 boot.
Then install the old 294T Bin using BL updater 1.4
Then install Chancy or Jvvh 253 boot/bin 640K.
Then the install the latest BIN and do user setup and rescan.
The full procedure is in the instructions in the full kit_295
PUFF link
Alternative PUFF link
Alternative PUFF link

Download and unzip into separate directory.
PLEASE DO NOT ATTEMPT WITHOUT READING INSTRUCTIONS.
 

lakh
Silver Member
Username: Kingofdakingz

Post Number: 359
Registered: Jun-06
Posted on   
no the boot files burns at 100% but after 10 seconds it says FAILED
 

Nalin Nyda
Platinum Member
Username: Nydas

Post Number: 12778
Registered: Jun-06
Posted on   
Which boot file - The b60 usually burns nicely through - and you get night riders - than you should load the old 294T bin and the receiver shuld come to ON position.
 

lakh
Silver Member
Username: Kingofdakingz

Post Number: 363
Registered: Jun-06
Posted on   
thats the thing when i load boot60 file it works but when the receiver turns on it says B-75 and it stops at 5 thats it.
 

Nalin Nyda
Platinum Member
Username: Nydas

Post Number: 12790
Registered: Jun-06
Posted on   
That meant the b60 has not loade. I suggest you try and load any old b75 BIN so the receiver will go to "ON" position. Then try loading b60 boot using the Chancy special loader.
You can also try and force the b60 boot by turning on reciever just after clicking using the BL updater 1.4. Several tries may end up with one success.
 

Juan Ramirezone
Silver Member
Username: Juancho

CANADA Xx

Post Number: 171
Registered: Jun-08
Posted on   
here is la b60 para puff ready
application/x-zip-compressedUpload
Boot60.zip (13.6 k)
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us