Please Post Working Viewsat Settings for South Asian Channels

Anony Mouse Bronze Member Username: Anonymouse Post Number: 33 Registered: Nov-07	Posted on Friday, October 10, 2008 - 14:35 GMT Hi Guys, I've tried a few things and am getting ) South Asian Channels. Tried factory default, old bin, blind scan, etc. I have a Viewsat Ultra. Here are my settings: Satellite: 110 LNB Power: On LNB Type: OCS-DP LNB Freq.: 11250 22Khz: Off TP Freq.: 12224 DiSEqC 1.0: Port 1 Motor: Off Legacy SW: None Satellite: 110 LNB Power: On LNB Type: OCS-DP LNB Freq.: 11250 22Khz: Off TP Freq.: 12224 DiSEqC 1.0: Port 2 Motor: Off Legacy SW: None Satellite: 61.5 LNB Power: On LNB Type: OCS-DP LNB Freq.: 10550 22Khz: Off TP Freq.: 12297 DiSEqC 1.0: Port 3 Motor: Off Legacy SW: None These settings were working fine till Oct. 09 (110 and 119 still working) Please help. Thanks in advance.
Plymouth Gold Member Username: Plymouth Canada Post Number: 4617 Registered: Jan-08	Posted on Friday, October 10, 2008 - 14:55 GMT Anony Mouse Which LNB you use? On 61.5 LNB Freq is 11250 You use OCS-DP only if you have DP LNBs, if not use standard.
Anony Mouse Bronze Member Username: Anonymouse Post Number: 34 Registered: Nov-07	Posted on Friday, October 10, 2008 - 17:49 GMT Hey Plymouth, Thanks for the reply. When I put 61.5 on 11250, regardless of whether I put OCS-DP or Standard... it shows 0 quality. If I put it on 10550 and put either OCS-DP or standard if shows full quality. I will try again and report back.
jatt New member Username: Jatt99 Post Number: 6 Registered: Sep-08	Posted on Friday, October 10, 2008 - 18:00 GMT How about Viewsat ultra lite? can i do something as viewsat ultra? anybody here expert?
Anony Mouse Bronze Member Username: Anonymouse Post Number: 35 Registered: Nov-07	Posted on Friday, October 10, 2008 - 22:44 GMT Update: All working now. On the plus side, I was only getting the guide on 611 and 617 before, now I get it on all South Asian Channels. Thanks Plymouth. Here's what I did. 1) Factory default. 2) Loaded May 07, 2008 bin. 3) Blind Scan on 61.5 on LNB 11250 w/ OCS-DP 4) Loaded latest bin 5) Auto Scan on 61.5 on LNB 10550 w/ Standard
Plymouth Gold Member Username: Plymouth Canada Post Number: 4626 Registered: Jan-08	Posted on Saturday, October 11, 2008 - 00:03 GMT Anony Mouse Good news I dont understand why it work with Tp Freq on 10550, but if it work now. How many channels you get on 61.5? I get 102 channels
Plymouth Gold Member Username: Plymouth Canada Post Number: 4627 Registered: Jan-08	Posted on Saturday, October 11, 2008 - 00:11 GMT jatt Ultra Lite is like Ultra but the remote is different with less function.
Anony Mouse Bronze Member Username: Anonymouse Post Number: 36 Registered: Nov-07	Posted on Saturday, October 11, 2008 - 08:40 GMT I got 194, but some are doubles. 102 sounds about right. I'll try to count later tomorrow. I have no idea why it works like that too, but I'm just happy it works.
Plymouth Gold Member Username: Plymouth Canada Post Number: 4633 Registered: Jan-08	Posted on Saturday, October 11, 2008 - 13:12 GMT Anony Mouse If you want deleted duplicate channels, go in channel scan and delete the satellite with gargage can, then enter the setting in the satellite setup then autoscan and now all must be ok.
Anony Mouse Bronze Member Username: Anonymouse Post Number: 38 Registered: Nov-07	Posted on Saturday, October 11, 2008 - 17:45 GMT I'm also sure that would work, but I don't want to mess anything up now that everything is working. Thanks for the help.
Plymouth Gold Member Username: Plymouth Canada Post Number: 4645 Registered: Jan-08	Posted on Saturday, October 11, 2008 - 17:50 GMT Anony Mouse I understand you, duplicate channels is better that no channels. I' am sure the next files, correct this problem.

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us