Solution for recover all TP and channels
|
Gold Member Username: PlymouthCanada Post Number: 4574 Registered: Jan-08 | -Load any old bin files May 2008 -Blind scan all satellites for get new Tp Delete channels or satellite(Viewsat) Do settings on each satellites and autoscan it load latest file and enjoy  |
|
Gold Member Username: DoreenakadjOntario Canada Post Number: 2146 Registered: Dec-06 | thanks Plymouth but I thought that the coders would take that into consideration when coding the bins wouldn't they? if not they should |
|
Gold Member Username: DoreenakadjOntario Canada Post Number: 2147 Registered: Dec-06 | btw.. once you do a factory reset all sats , tps and channels are gone. I would suggest saving all channel lists and reload it when getting a new file. That way you wont need to do the steps all over again like Plymouth offers here. |
|
Gold Member Username: PlymouthCanada Post Number: 4577 Registered: Jan-08 | Doreen The satellite setting is now in Keys and you must scan with old bin. Tested and work fine |
|
Gold Member Username: PlymouthCanada Post Number: 4579 Registered: Jan-08 | Here is another solution neil Silver Member Username: Frobi Post Number: 234 Registered: Aug-06 Posted on Thursday, October 09, 2008 - 09:48 am: Edit Post Thanks Plymouth. Did factory default, loaded older bin (17/12/07), rescanned, got all channels, reloaded latest bin, unabled patch and works great. |
|
Gold Member Username: Cartier1Post Number: 2100 Registered: Feb-07 | PLYMOUTH THANX . BUT IS THIS SOLUTION FOR THE QUALITY THAT DROPED TO ZERO, OR IT;S CORRECTING MISSING CHANNLES. ???? I HOPE IT CORRECTS THE QUALITY ISSUE. |
|
Gold Member Username: PlymouthCanada Post Number: 4589 Registered: Jan-08 | Cartier Example: before 68 channels and after 160 channels and all work I found that the settings are inside the provider keys. I tied to deleted provider in key menu but it not work, then i tried a old bin and autoscan and all channels come, then i install latest bin and all channels come up. It work for both provider |
|
Gold Member Username: PlymouthCanada Post Number: 4590 Registered: Jan-08 | Neil try a factory default and load old file and autoscan then load latest file and it work too. The secret is, scan with old file |
|
Bronze Member Username: Mohamad_obamaTerhan, Iran Iran Post Number: 28 Registered: Oct-08 | ply mouth you stated you only watched true fta, why do you need a bin? |
|
Gold Member Username: PlymouthCanada Post Number: 4596 Registered: Jan-08 | I says factory file VIEWSAT_ULTRA_V0143.PGM not work fine, i use this one VIEWSAT_ULTRA_V0132.PGM AND IT WORK FINE   |
|
Bronze Member Username: BazzoonPost Number: 29 Registered: Aug-07 | What is so special about bins from May 2008? |
|
Gold Member Username: PlymouthCanada Post Number: 4679 Registered: Jan-08 | baz zoon You can try another bin file, the problem come from one of the 2 or 3 latest bin files, probably corrupted. |
|
Gold Member Username: Cartier1Post Number: 2115 Registered: Feb-07 | still dont get a signal |
|
Silver Member Username: DimwittPost Number: 953 Registered: Aug-06 | C/P Plymouth Gold Member Username: Plymouth Canada Post Number: 4574 Registered: Jan-08 -Load any old bin files May 2008 -Blind scan all satellites for get new Tp Delete channels or satellite(Viewsat) Do settings on each satellites and autoscan it Do the Hokey Pokey load latest file and enjoy |
|
Gold Member Username: PlymouthCanada Post Number: 4750 Registered: Jan-08 | Cartier I post a answer for you on this thread: https://www.ecoustics.com/electronics/forum/home-video/519896.html |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics