Viewsat Platinum problem plz help!
|
New member Username: Asmith09Post Number: 1 Registered: Oct-08 | My viewsat platimum won't connect with my computer this has never happened before. I try to download the fix from Loader 2 and it stays at 0 percent. In the dialog box it says 0% and resending ZRQINIT. |
|
Bronze Member Username: MrgregChatham, Ont. Canada Post Number: 31 Registered: Dec-07 | Make sure you have the right com port |
|
New member Username: Asmith09Post Number: 2 Registered: Oct-08 | i've done all of that already i just re downloaded loader 2 and its the same prob. |
|
Bronze Member Username: MrgregChatham, Ont. Canada Post Number: 32 Registered: Dec-07 | Are loading from usb port or serial |
|
New member Username: Asmith09Post Number: 4 Registered: Oct-08 | serial port |
|
Bronze Member Username: MrgregChatham, Ont. Canada Post Number: 33 Registered: Dec-07 | Do you have it set to com port 1 |
|
New member Username: Asmith09Post Number: 5 Registered: Oct-08 | Yes |
|
Bronze Member Username: MrgregChatham, Ont. Canada Post Number: 35 Registered: Dec-07 | Is your config set to auto or man. com port |
|
New member Username: Asmith09Post Number: 6 Registered: Oct-08 | manual |
|
Bronze Member Username: MrgregChatham, Ont. Canada Post Number: 36 Registered: Dec-07 | Try it on auto com port 1 |
|
Gold Member Username: PlymouthCanada Post Number: 4446 Registered: Jan-08 | ZRQINIT is no commication with port Uninstall the loader on computer, go in program file and delete the loader file, do a hard reboot, and install the loader from Viewsatusa.com, choose com port 1 in tool menu and try to load file in receiver. Reply with result.  |
|
New member Username: Asmith09Post Number: 7 Registered: Oct-08 | just did same problem i'm really stumped |
|
Bronze Member Username: MrgregChatham, Ont. Canada Post Number: 37 Registered: Dec-07 | About time you showed up Plymouth |
|
New member Username: Asmith09Post Number: 8 Registered: Oct-08 | Ok i reinstalled the loader and it was the same deal |
|
Gold Member Username: PlymouthCanada Post Number: 4449 Registered: Jan-08 | Ashli Try this loader from Viewsat [link removed] |
|
Gold Member Username: PlymouthCanada Post Number: 4450 Registered: Jan-08 | I will try Greg  |
|
Bronze Member Username: MrgregOnt. Canada Post Number: 39 Registered: Dec-07 | Ashli I will leave this one with Plymouth as he is better at this then me. good luck |
|
New member Username: Asmith09Post Number: 9 Registered: Oct-08 | Thanks for you helop greg! and Plymouth i downloaded it and tryed the fix same problem as the loader 2 |
|
Gold Member Username: PlymouthCanada Post Number: 4455 Registered: Jan-08 | Do a scan with a antivirus and spyware, then retry. |
|
New member Username: Asmith09Post Number: 10 Registered: Oct-08 | Yeah I'm way ahead of you i did that all earlier.. but i'm convinced its the box that's the problem |
|
Gold Member Username: PlymouthCanada Post Number: 4457 Registered: Jan-08 | OK Try it: Power off with rear switch, then press and hold the power button on front panel, power "on" rear button and release front button and download your file. I am sure the problem come from your computer with ZRQINIT error message. |
|
Bronze Member Username: Asmith09Post Number: 11 Registered: Oct-08 | ok i tried no lock though i guess i will just have to get a new box thanks alot for the help Plymouth i appreciate it! |
|
Gold Member Username: PlymouthCanada Post Number: 4462 Registered: Jan-08 | ashli smith Read it: https://www.ecoustics.com/electronics/forum/home-video/519388.html Sorry too many thing with nonsense happen, i try to found a solution. |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics