can someone help.my settings are right in antenna setup and i have tried alinging the dish with a satfinder but when i get v tp with signal i cant seem to get signal for h tp.
You have to adjust the SKEW (rotate it like a clock or a steering wheel), as well as adjust the azimuth and elevation on the dish...use this to help you...
www.dishpointer.com
Also don't forget that you MUST input the LNB, switch , and switch port info for BOTH satellites (110 AND 119)into your receiver "antenna" settings..as well as SCAN both satellites.
Take and manualy change each horizontal by subtracting its number from 25600 and changing it to vertical. Its called bandstacking. Look at Lyngsat*com for the TP frequencies.