Pansat files out

 

Bronze Member
Username: Superslammy

Post Number: 73
Registered: Sep-07
The fix is out!
 

Bronze Member
Username: Getmo96

Post Number: 34
Registered: Jul-08
Here is the 289 in RAW format. I used Tronics Bin Mod 1_5_GUI

Bin
http://www.dsstester*com/files.php?cat=12
 

Platinum Member
Username: Nydas

Post Number: 11649
Registered: Jun-06
This is a Pansat thread. Do not confuse people who are looking for genuine Pansat files. You will kill their receivers.

Genuine Pansat 2700
X-87BL_080915_B75_289_api.zip

Clone Pansat 2700 manufactured as a 2700 clone
CloneSafe-B75-289-TiVo.zip
Do NOT use on conversions. OK to use on genuine 2700.

Conversions: b75 Use any of the ones below
They are currently made by Black Tyger. Similar made by Haddad as well
Version 289 not available yet.
Black Tyger B75 Bin v288.bin
These BINs have the word b75 in the file name

Conversions: PUFF. Use any of the ones below
Fwank7_Jvvh-Team-PUFF_289.bin or Fwank7_ PUFF_289.bin
Fwank7_Jvvh-Team-PUFF_289_(Sw-21).bin or Fwank7_ PUFF_289_(Sw-21).bin
Black Tyger PUFF Bin 266
These BINs have the word PUFF in the file name
 

Bronze Member
Username: Superslammy

Post Number: 74
Registered: Sep-07
Thanks Nalin, I was about to ask PUFF what the heck he was talking about?
 

Bronze Member
Username: Getmo96

Post Number: 38
Registered: Jul-08
Tronics bin mod will take X-87BL_080915_B75_289 and convert it to PUFF automaticly.

This version supports more receivers. The old version only did PUFF conversions. This version now works for the following receivers:
PUFF converted receivers
B75 using LH5 compression converted receivers
2700 clone receivers using stock B75 boot without any compression
Converted Ariza receivers
 

Bronze Member
Username: Getmo96

Post Number: 39
Registered: Jul-08
ooops i get it now. This only for the people who use the X-87BL_080915_B75_289 without mod.
 

Platinum Member
Username: Nydas

Post Number: 11654
Registered: Jun-06
superslammy: PUFF Diver has a point. With the Tronics direct load software, you do not have to wait for new PUFF files to be posted. You can have this Tronics loader ready in your computer, and as soon as new BIN is published for the genuine 2700, you can load your receiver using Tronic Converer/loader and the new BL BIN.
When I tried to alert people to this method, i had six private emails with problems - they were all related to inexperience or lack of knowledge, but it did create an extra unneeded workload for me.
 

Bronze Member
Username: Getmo96

Post Number: 40
Registered: Jul-08
Should I create a thread for this tool so we can refer people to it? It took me a few minutes to figure out, but it is some what simple. I haven't tried it's other features though.

I dont mind helping people. I am always on my PC ;-)
 

Platinum Member
Username: Nydas

Post Number: 11657
Registered: Jun-06
I have nothing against Tronics software. He is by far the most aggressive and knowledgeable of the whole clan of modifiers. If people can understand how to use the software and use it accordingly, it is a good piece of software.
One should be careful in creating a thread with separate heading to make sure that only those who want to convert or use it in an effective ay go to it.
 

Bronze Member
Username: Getmo96

Post Number: 50
Registered: Jul-08
If you are just using it to load a B75 to PUFF, it only has one more additional step which is clicking the mod bin button. button. The rest is the same. He has included a GUI now so it is just point and click, no command line.

1. browse your pc for 2700 file (B75)
2. Click PUFF to state you are using a PUFF bootloader
3. Click Mod Bin
4. Select COM1
5. Then click Download. A pop up tells you what to do from there.

There also a nice detailed help tab at top.

Upload
 

Silver Member
Username: Kingofdakingz

Post Number: 328
Registered: Jun-06
yup it works fine the puff bin
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us