Can someone explain this?
|
Silver Member Username: SwirvinPost Number: 105 Registered: Feb-05 | ive had a sonicview 8000 for over a year. never had a problem with it once until the 402/403 bins came out. after a factory reset and factory bin, i can put in an old file like 261 and i get all my sats, 82-110-119 and 129 with good signal and strength. i even get the EPG, but the screen just says "scramble channel" then i update to the 403 and i lose all quality on my sats and the screen says "no signal" is this 403 any good? some say it works just fine but i cant understand why it wont for me. |
|
|
Silver Member Username: JustforhahasPost Number: 141 Registered: Jul-08 | Recheck your dish antenna settings after your 403 upload and then do a reboot. | |
|
Gold Member Username: TapemanNew York City in-HD, NY Post Number: 3273 Registered: Oct-06 | What this means an older bin had an operating frequency on provider first stream or second stream Don't go crazy Yor settings were right Yor antenna pointing was right too Yo asked for explanation And that's what this is From time to time older bins work on new ECMs in second stream To correct: - Load latest bin - Do factory default - Rescan one sat at a time |
|
|
Silver Member Username: SwirvinPost Number: 106 Registered: Feb-05 | tapeman, i cant rescan any sats because i cant get a signal on any of them AFTER i put on the new bin. | |
|
Silver Member Username: JustforhahasPost Number: 150 Registered: Jul-08 | lmao @ king, some reading and thought is required when giving recomendations. no quality signal = no scan whenever a new file is uploaded, the receiver will sometimes lose the correct settings that were previously input, so recheck them again and do a reboot. |
|
|
Gold Member Username: Saqeeb9000Post Number: 3742 Registered: Oct-07 | so now u have problems with king.. | |
|
Silver Member Username: JustforhahasPost Number: 153 Registered: Jul-08 | sada haji, Mind your own business, cause you lack intelligence and common sense. I have no problems with king at all. I think his response wasn't thought out before he posted, but he's got twice the brains that you wish you had. |
|
|
Platinum Member Username: NydasPost Number: 11422 Registered: Jun-06 | justforhaha's....LK.... Go and take a dip in Largo key. |
|
|
Gold Member Username: GregrafPost Number: 1074 Registered: Dec-07 |  |
|
|
Silver Member Username: Tigger_woodsWONT BE GOLFING, UNTIL BUICK OPEN Post Number: 686 Registered: Jun-07 |
|
|
|
Gold Member Username: TapemanNew York City in-HD, NY Post Number: 3274 Registered: Oct-06 | "lmao @ king, some reading and thought is required when giving recomendations. no quality signal = no scan " Obviously yo know nothing I know exactly what he did and it's not his settings Maybe yo should be careful on what yo say Cayote Yo wanna correct the problem yo follow my instructions To correct this issue: I'm assuming yo know how to assign ports and LNBs - Load v-403 once again - Do factory default - Rescan one sat at a time - Yor channels will populate If yo don't know how to assign ports and LNBs then write down each antenna settings cuz factory default will reset it Factory default is what yo need based on info yo provided NO BLIND SCAN |
|
|
Gold Member Username: PlymouthQuebec city, Quebec Canada Post Number: 3476 Registered: Jan-08 | King To correct this issue: I'm assuming yo know how to assign ports and LNBs - Load v-403 once again - Do factory default - Rescan one sat at a time - Yor channels will populate Right way - Do factory default - Load v-403 once again - Rescan one sat at a time - Yor channels will populate  |
|
|
Gold Member Username: TapemanNew York City in-HD, NY Post Number: 3275 Registered: Oct-06 | same thing Factory default has no effect on flashed bins His issue is due to freq disorder cuz of blind scan even if he didn't say it |
|
|
Silver Member Username: JustforhahasPost Number: 157 Registered: Jul-08 | If you don't have the correct receiver antenna settings, you'll never get TV, no matter what else you do. its a very simple task to go into the receiver and check them. Why do you people argue and discourage people from doing simple checks of their settings, which is usually 90% of people's problems. You people are too funny. That wannabee list is getting longer by the day. | |
|
Platinum Member Username: NydasPost Number: 11424 Registered: Jun-06 | justforhaha's....LK.... Go and take a dip in Key Largo. |
|
|
Gold Member Username: TapemanNew York City in-HD, NY Post Number: 3277 Registered: Oct-06 | It's not LK LK is much more experienced Wile Cayote says as soon as he loaded bin 403, no signal Has absolutely nothing to do with settings He can get signal and strength with older bins But he can't get it to disscramble using old bin To me it means he had correct settings He only had problem with newer bins like 402 and 403 READ HIS FIRST POST AS MANY AS YO WANT At the end is a matter of experience Experinced techs pay a lot more attention to details Wile Cayote Take it from an experienced Engineer Yo either did blind scan or somehow yo were locked to the second stream What yo need is: - Do factory default - Load v-403 once again - Avoid blind scan - Do sat scan or TP scan one sat at a time - Yor channels will populate |
UploadMain Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics