|
Bronze Member Username: GupulambaBrampton, Ontario Canada Post Number: 51 Registered: Oct-07 | hi i have a flu to pansat converted receiver and last time i used black tyger LZMA bin v282 so this time i tried to install the puff 284 bin but it doesnt work so can anyone help me please like it would install but the P-U-F-F cycle would continue and ON wont show CAN ANYONE HELP ME PLEASE THANKS |
|
Bronze Member Username: GupulambaBrampton, Ontario Canada Post Number: 52 Registered: Oct-07 | can anyone please help me it will be really appreciated |
|
Silver Member Username: MuchoPost Number: 511 Registered: Dec-07 | gupu A) Was your receiver converted to Puff? B) If it was not, try this Bin Black Tyger B75 Bin v284.zip C) Don't forget to unzip. |
|
Platinum Member Username: NydasPost Number: 11375 Registered: Jun-06 | https://www.ecoustics.com/electronics/forum/home-video/508354.html |
|
Bronze Member Username: GupulambaBrampton, Ontario Canada Post Number: 53 Registered: Oct-07 | yea i converted my receiver to puff longtime ago then LZMA file came in so i installed that one on ma flu converted to pansat but i m trying to install the new puff bin it installs but ON wont come so can anyone please help thanks |
|
Platinum Member Username: NydasPost Number: 11378 Registered: Jun-06 | If you have LZMA boot it will show up as P-U-F-F. when you turn it on - notice the decimal point after the last F. Is so, you must do "Revert to 2500" first, followed by 294T Bin, and the convert to PUFF. The following URLs will get you all that you need to convert or to just install a 284 or 285 BIN for your old 2500 or FLU. [link removed] [link removed] Please read the instructions properly in the section you have chosen. PLEASE DO NOT ATTEMPT WITHOUT READING INSTRUCTIONS. There is a a DIY method for converting and installing any of the 2700 group of receivers, i.e. genuine 2700, clone 2700 and converted 2700. [link removed] This has been developed by Tronic You will need the latest genuine Pansat 2700 284 BIN from: |