Captiveworks Loader
|
Bronze Member Username: KellergirlOrlando, FL Post Number: 85 Registered: Sep-07 | Can someone PLEASE tell me where I can find the Captiveworks 1.04 loader? Thank you! |
|
Gold Member Username: PlymouthQuebec city, Quebec Canada Post Number: 3258 Registered: Jan-08 | Kellergirl here is the 1.04 loader http://www.kashbrand.com/files/CW_v1.04_plusUSB.zip  |
|
Bronze Member Username: KellergirlOrlando, FL Post Number: 87 Registered: Sep-07 | Why am I having trouble loading the bin? It hangs and does nothing. |
|
Gold Member Username: PlymouthQuebec city, Quebec Canada Post Number: 3260 Registered: Jan-08 | Kellergirl Which message you have? You unziped it? you use USB to serial cable? |
|
Bronze Member Username: KellergirlOrlando, FL Post Number: 88 Registered: Sep-07 | No, have an RS 232 cable, not USB. It doesn't give any message, I hit start, and it does nothing. |
|
Gold Member Username: PlymouthQuebec city, Quebec Canada Post Number: 3261 Registered: Jan-08 | OK power OFF switch on back panel Press and hold front power button and power ON rear switch, release front power button, "boot" appear on front display , now load it. if not work, load factory bin and last bin using same technic Note: power OFF on back panel on betwwen each load Good luck |
|
Bronze Member Username: KellergirlOrlando, FL Post Number: 89 Registered: Sep-07 | Still hangs. |
|
Gold Member Username: PlymouthQuebec city, Quebec Canada Post Number: 3263 Registered: Jan-08 | Kellergirl what you see on display? In tool menu select com 1 |
|
Gold Member Username: DoreenakadjOntario Canada Post Number: 1781 Registered: Dec-06 | Kellergirl what Captiveworks receiver are you using? Btw it's good practice to load any bins in STANDBY MOD Here's what you'll need: Null modem cable (probably got one with your receiver) Loader v1.06 or v1.05 (you can use either) , then the Latest bin Here's what you do: 1. Download loader and bin to your computer. Unzip the bin and copy it to somewhere you can find it easily when browsing from your loader. 2. With the receiver turned off on the rear switch, connect it to your computer via the null cable. 3. Put your machine into either (a) STANDBY or (b) BOOT mode (you can load it either way). (a) To get it to STANDBY mode, turn the receiver's rear switch ON, and when you see 00:00 (clock) on the display, turn OFF using the FRONT button; you will then see --:-- (STANDBY). (b) To get to BOOT mode, hold the front power button, and turn the rear switch ON; you will see "boot" displayed. 4. Open the loader and browse for the bin where you saved it unzipped. Select it and click start. 5. Wait until you see "end", then you can power off the receiver and disconnect from computer. CW Manual Key Entry How To for Key Entry and Turning AR off CaptiveWorks CW600s and CW600p Manual Key Entry for when Auto-roll is not working. Step 1: Turn Off AUTO-ROLL Go to Menu. Go To System Setting. Go To OSD. Go down to Auto Roll option and turn it to Off. Step 2: Manual Key Entry Go to Menu. Go To Accessories. Go down to Key Menu. Press Left Arrow Once to show "NAGRA2" on top of screen. B*V: Go down to 00 09 01 section 80 is Key 00. Press Green Button. Enter new Key 00 there. Go down to 00 09 01 section 90 is Key 01. Press Green Button. Enter new Key 01 there. D*shNetw*rk: Go down to 00 01 01 section 80 is Key 00. Press Green Button. Enter Key 00 there. Go down to 00 01 01 section 90 is Key 01. Press Green Button. Enter Key 01 there. Enjoy! Btw after you have scanned for all the Sat's don't forget to use the remote ... press F1 000 the activate the bin |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics