i have ultra 2000 and i put latest bin with both cable and memory stick but aftar dll i see FAIL on screen.i use true bin (723U) and 1.1 loader or pvr loader but after dll i see FAIL.what is wrong with this.help please thanks in advance
Make sure u unzip the file before you install. It will say fail if not unziped. If its like the extreme after download is complete wait till reciever says end before you turn it off.
i know u only invite nalin and plymouth. may be they are busy.....or something.. here are something u can try.. format the usb.. (it will delete everything on usb).. how to do it, it should be option in ur remote, under usb. and then download the file using usb.. easier and faster.. the other way to do it save ur channels list on usb.. (again option in ur remote), then do a facotry reset using ur remote again, and then install new bin,and use download the channel list again.
Uninstall your loader on windows and do a search and delete all files for this loader
In your package box with receiver is furnish a cable RS-232 you must download factory bin with the cable from your computer . Go to: <[link removed]> download and unzip this 2 files: PVR/Ultra Loader v1.1 - Firmware Updater ( Serial)you install this one on computer VS2000 ULTRA Factory Bin File - V132 for download with the loader in your receiver
close rear switch on receiver open program take file v131 clic to download in receiver and a second after switch on the transfert take 5-10 mins you must see 0000 download the last bin with USB Good luck
Note the present file does not work properly(freeze)
I have a Pansat2700A by mistake I downloaded channel Data file using loader instead of App file to my reciever. Then I did factory setting to initialise my reciever.After that I download again b75 279_Api. it worked but all my pak & Indian channels are gone . I dont know how get those channels back. Channels like Geo.. & zee etc..please help me out guys...I appreciate in advance.
Nadeem: You should rescan the sat for the Indian channels. The latest BIN has added the feature of two diseqC switches - 1.0 and 1.1 and you will have to try both with the port setting that you have had in the past. Use Blind Scan.
