I used a pansat 2500a converted to 2700 with CS_250_Lighting_100t_Series_serial.bin few month ago. Now I come back and donwload the fwank7_Jvvh-Team-PUFF_276.bin. After donwload is done, LED display just '5' and keep it. It never display the any channel number. Do anyoine know how can iI fix it? And what is the PUFF file?
Steven..a few months ago i think you converted it to 2700 FLU B75 not PUFF so you cannot use the PUFF bin...you need to use the B75 bin not PUFF bin.. here the B75 bin..
http://www.ftabins.net/showthread.php?t=46223 Black Tyger B75 Bin 276 v2.zip Loader...Blacklist Updater v1.4
if you want to convert it to PUFF here the instruction..
http://www.ftabins.net/showthread.php?t=31319
Here is the new PUFF 253 bin for those who want to start converting to PUFF now.
Also is the Loader and Boot60 zip.
In that zip file is the 2700 to 2500 convertor loader by Chancysand as well as the boot60 bin file.
Jvvh_Fortec-Pansat_CanAm_(PUFF)_253(640k) bin is the "MUST LOAD FIRST BIN" to get you converted to PUFF.
How to Load.
Open 2700 to 2500 Loader Converter.
Click Bin File, choose Boot60.
Turn reciever ON.
Let reciever fully boot up ,soon as you see ON hit Download.
Write will complete in 10-15 seconds. Reciever will self reboot with knight rider dash (- - - -) rolling across display screen.
LEAVE RECIEVER ON DO NOT TURN IT OFF.
Open FortecStarSTB loader or whatever Loader you use before. Load Jvvh_Fortec-Pansat_CanAm_(PUFF)_253_(640K) bin. Hit Download.
After download complete reciever will pause on dash. Reciever will self reboot to knight rider dash (- - - -) "again". It will pause on 4th dash for 3-5 minutes DO NOT reboot reciever LEAVE it alone.
Reciever then will self reboot with P U F F _ P U F F then pause on F for 30 seconds then display ON. you done..