Do not Get Echo 7KU

Trinity Bronze Member Username: Trinity Post Number: 48 Registered: Oct-06	Posted on Saturday, July 12, 2008 - 13:53 GMT Someone please help me. I download the latest file on my Panset 2700E and did a factory reset hich removed all my channels. Next I scanned echo 3KU and I got all the channels of echo3KU. HOwever when I scanned Echo 7KU it downloads only the echo3Ku channels. How can I get the channels from echo7ku?
Tooter Silver Member Username: Dimwitt Post Number: 796 Registered: Aug-06	Posted on Saturday, July 12, 2008 - 14:04 GMT in antenna settings make sure you have the correct diseqc port assigned for echo 7
Trinity Bronze Member Username: Trinity Post Number: 49 Registered: Oct-06	Posted on Saturday, July 12, 2008 - 17:21 GMT Thanks Tooter, I noticed something funny has happened to my diseqc port. Previously it only had numbers from 1 to 4 and off. Now it has numbers which shows (1.0)#1 upto (1.0)#3 and also (1.1)#1 upto (1.1)#16. I tried changing the diseqC yet I get no Echo7Ku channels. What is the best thing I can do? Thanks
Trinity Bronze Member Username: Trinity Post Number: 50 Registered: Oct-06	Posted on Saturday, July 12, 2008 - 19:28 GMT someone please help!!!
Tooter Silver Member Username: Dimwitt Post Number: 798 Registered: Aug-06	Posted on Saturday, July 12, 2008 - 20:58 GMT if you had echo 7 before the d/l of new bin and factory reset, i would assume that your antenna settings are wrong. ensure that the lnb type is correct , lnb freq is 11250 and select diseqc port (most likely from the diseqc 1.0 options).
nick adan Silver Member Username: Borinick Post Number: 402 Registered: Mar-07	Posted on Saturday, July 12, 2008 - 23:40 GMT me too got the same problem

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us