FTA Satellite Receivers FIXES! pansat fixes captive works satopia
These websites below will be able to support Pansat Captive works Satopia sonicview and all the other good fta receivers. These are all trusted fta satellite receiver fixes forums. new fta receiver bin files setup info and more
[link removed] norw file release site
[link removed] norw file release site
http://www.dsstester .com no membership downloads
stick to the trusted forums listed above and you will be safe!
The following is an example of a very small part of a site [link removed]
As you can see, it is loaded with information.
DISH FAQ AND HOWTO 118.7, Anik F3, Ecxostar 6... 118.7 Anik-F3, How do I get it? RG6 Cable length & signal quality Best dish for 82,91,110,119 Why is my signal bouncing around? DP34 Switch Help sick of all the ECM !! options available!! DishPro and Legacy Info! How to setup your Dish1000.2 with a FTA Receiver How to Setup your Dish500 Dpp/Superdish Dp with a HD Receiver Peaking your dish with a Satellite Finder(TIPS) Laser Alignment Laptop no com port question How to start your motor dish setup, first things first. How a diseqc switch works DISHPRO 1000 ~ Official Document & Specs. Aspen eagle Broken arm on the dish A discussion of signal strength and quality... Nees Help Please!!!Super Dish The "best" Dishpro Document
FTA Faq and How To's How To Post Files & Photos Handy utility for dish effeciency How to reaim your BEV dish to get DN ( 1 2) How To Use The Search Features
Connect serial cable (NULL) to PC>Stb Open up Loader of choice (PVR-Loader 1.1 or Loader2) Click on Tool>Configuration>Com port (Default is com 1) Click on Open File Click on PC>Stb (Notice the progression bar in loader) Wait for Loader say Completed. Then on box lcd front panel screen say I.N.S.T>END>0000 or until clock count to 0.001 it is verry important. Do not turn the power off to soon Turn the power off in front and then back switch Connect all the cables to your box/TV Turn the power ON from the front and back switch Press Menu key Select Installation and press OK Select Antenna Setup and press OK Select your Sat. Here if you have a diseqC switch enter the port #, Motor or Legacy SW No lnb type need to select (from new, you have only two selection Standard and Universal). Stb will select your lnb automatic Press Exit and select Yes for saving the settings Your back to Antenna Setup screen Here you have Three choices: 1. Channel Scan 2. Auto Scan 3. Blind Scan Select Auto Scan Press OK You are in the Auto Scan window and you see the Bird(Sat.) you selected and on the top of your screen are three options: 1. Search option 2. Network search 3. Scan Start You don't change nothing, go down and select Scan Start and press OK You do this for all the Birds (Sat.) you have Wait for Autoroll and watch TV
