file for converted puffs???
|
Bronze Member Username: SaadiaaPost Number: 92 Registered: Nov-07 | Can some one tell me if there is a working old bin converted puff fortec receivers ????????and if yes where can we get it  |
|
Silver Member Username: Ash64Post Number: 121 Registered: Nov-07 | hmmm.. find your answer on this thread !! "Is 251 working on PUFF (Pansat 2700 clone)? " |
|
Silver Member Username: BatjcPost Number: 141 Registered: Aug-07 | Lothario 250 PUFF for converted Pansat 2500 to 2700 is workin @ ftasupport*info replace * with a dot |
|
New member Username: HarrisonPost Number: 10 Registered: Feb-07 | Working great with Lothario 250 PUFF. |
|
Platinum Member Username: NydasPost Number: 11015 Registered: Jun-06 | https://www.ecoustics.com/electronics/forum/home-video/500017.html |
|
Platinum Member Username: NydasPost Number: 11017 Registered: Jun-06 | As far as I can tell there was no PUFF compression available with 250 or 251 BINs, and those BINs are all b75. Please be sure you convert to b75 Boot first and then install a B75 BIN. |
|
Silver Member Username: BorinickPost Number: 396 Registered: Mar-07 | nalin why is that others have that bin 251 puff |
|
Platinum Member Username: NydasPost Number: 11021 Registered: Jun-06 | Nick adan: The first special 640K PUFF boot/Bin I have is version 253 (Chacy and JVVH) I certainly cannot find an older PUFF than version 253. Please point me to the PUFF_251. |
|
Bronze Member Username: Kb1Post Number: 39 Registered: Aug-07 | So Naylin File for Puff is coming soon or not |
|
Bronze Member Username: Outback901Post Number: 37 Registered: Jan-06 | looking for new keys |
|
Bronze Member Username: GupulambaBrampton, Ontario Canada Post Number: 45 Registered: Oct-07 | hi i converted ma flu to puff n now i converted it to b75 but i didnt get any indian channels and all the other channels doesnt work it says no signal did this If you using b75 BINs and have b75 boots you may download the b-75_BINs_250-251.zip and use any BIN If you have puff, download the Revert_to_2500 and unzip it. Use the 2500-2500 convert.exe to install the b60 boot. Then use BL updater 1.4 to install the 294T BIN, followed by installation of b75 BOOT using the jvvh_208_2500to2700.bin. Then install the 250-251 conversion BIN either CS_250T_lightning or one of the other BINs. |
|
Silver Member Username: HaloToronto, Ontario Canada Post Number: 556 Registered: Oct-07 | working bins will be posted at |
|
Platinum Member Username: NydasPost Number: 11027 Registered: Jun-06 | I just changed two receivers with PUFF back to b75 and they are both working fine on CS_250T_Lightning BIN. |
|
Platinum Member Username: NydasPost Number: 11029 Registered: Jun-06 | Lothario PUFF_250 bin is out. http://public.box.net/2500_full_kit In the PUFF section |
|
Bronze Member Username: BluegillbillPost Number: 66 Registered: Sep-06 | is bev working with cs250 |
|
Platinum Member Username: NydasPost Number: 11033 Registered: Jun-06 | I don't know but it should work with 250 or 251. Or wait for b75 and PUFF 275. |
|
Silver Member Username: DureMississauga, Ontario Canada Post Number: 199 Registered: Jun-06 | Nalin, Pl inform how do you convert Puff to original FUL briefly. Thanks |
|
Platinum Member Username: NydasPost Number: 11037 Registered: Jun-06 | 1. save using channel master with receiver fully on 2. Install b60 boot using 2700to2500 conversion.bin and select boot only - install with receiver in fully on position. 3. Change to BL updater 1.4 and install 294T BIN clicking on the first appearance of dash after turning on. 4. Let it go to fully on - takes a while 5. Install jvvh 640K 253 boot/bin with receiver fully on. Takes a long while for b-7-5 to appear. Stops on 5 but may go on to "ON". Wait and make sure. 6. From "off" install latest b75 BIN as soon as first "b" appears when you turn on. 7. In "ON" position restore the channels with channel Master. 8. Connect and adjust time etc. 9. if you had not used channel master, you will have to do full user and antenna setup setup and scan. |
|
Silver Member Username: Shadow45Mty, Nuevo Leon Mexico Post Number: 274 Registered: Aug-07 | So does this Lothario_250 puff works for a clon 2500 converted to PUFF? any one tried it yet?. |
|
Silver Member Username: DureMississauga, Ontario Canada Post Number: 200 Registered: Jun-06 | Thanks a million times Nalin. you are very prompt and very helpful. Thanks again. |
|
Gold Member Username: AsharfiPost Number: 1986 Registered: Aug-06 | Bin 250 is very old and it's working good on FLU/2500 to B75 receivers. I have just released the latest PUFF/LZMA/B75 bins at DSS World and I am the first one so far. LOL! Download them from |
|
New member Username: DonaldjcPalmer, Ma USA Post Number: 1 Registered: Jul-06 | There is a 250 PUFF at FTATALK.com for Fortec's.The word I got was that it worked for DN and not for Bev. I have not tried it I'm watching Bev on the 274 PUFF bin. |
|
Gold Member Username: AsharfiPost Number: 1987 Registered: Aug-06 | Donald, Download bin 275 which was released few minutes ago by me. It's working good on both DN & BEV. |
|
New member Username: DonaldjcPalmer, Ma USA Post Number: 2 Registered: Jul-06 | The Fortec 275 Puff bin is at FTATALK.COM, Just out 1 hour |
|
Bronze Member Username: AryanMississauga, Ontario Canada Post Number: 65 Registered: Nov-07 | Nalin, i am converting my pansat back to b75, i installed 294T bin and now receiver is on. where to get jvvh 640K 253 boot/bin?? this is not available even in http://public.box.net/2500_full_kit pls help thanx |
|
New member Username: FisuyPost Number: 3 Registered: Jun-08 | where can i get the 294 bin |
|
Platinum Member Username: NydasPost Number: 11041 Registered: Jun-06 | The 294T is in the revert to 2500 section and the other files are there where you need them in the sections you are using. |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics