A Problem, Any Advice?

Dizasta Silver Member Username: Dizasta USA Post Number: 144 Registered: Nov-06	Posted on Friday, June 13, 2008 - 14:20 GMT Hi, I have two dishes setup for my SonicView Elite PVR and VS Pro box. One dish is 61.5 and one Nimiq 1. 61.5 is working fine while the other Nimiq 1 whenever I connect the LNB wire to the box's LCD screen goes to b and then boot and then just repeating boot and trying to reboot the box. But when i disconnect that wire from the box, the box reboots properly and works fine. Any advice or anyone else had that problem.
Nalin Nyda Platinum Member Username: Nydas Post Number: 10936 Registered: Jun-06	Posted on Saturday, June 14, 2008 - 04:10 GMT Did you know that DN is up and BEV (Nimiq 1) was down and needs a new BIN?
Not Today Silver Member Username: Extremex Post Number: 224 Registered: Nov-07	Posted on Saturday, June 14, 2008 - 13:01 GMT Could be a short in the RG6 cable.
lroy tipit Silver Member Username: Lroy Post Number: 403 Registered: Aug-06	Posted on Saturday, June 14, 2008 - 13:24 GMT Yes could be a short in the cable, check both ends of the cable and ensure you have clean, good and proper connections. Good luck.