Bronze Member Username: Willo1Post Number: 34 Registered: Jun-06 | i have fortec lifetime ultra. i have not used for 7-8 months. i want to turn on. before i was using with code change. now i can't so. my question is how would i transfer to puff boot 60. i have read how to convert to boot 60. do i just download boot60 file and lastest file. or should i use b-75 file. please help what i should do. |
Platinum Member Username: NydasPost Number: 10846 Registered: Jun-06 | Turn it on. If it starts saying b-7-5, thenyou have Boot b75; if it says P-U-F-F then you have PUFF boot. Most likely you have b60 boot. look at Menu/system info. If will probably say 294t That means you have b60 with BIN 294T. Either you first convert it to b60 if you want to go from b75 to PUFF and then install PUFF BIN 269, or you convert it to b75, if not already so and install b75 BIN. *.*.*.*.*.*.*.*.*.*.*.*.*.*.*.*.*.*.*.*.*.*.*.*.*.*.*.*.*.*.*.*.*.*.*.*.*.*.*.*. *.*.*.*.*.*.*.*.*.*.*. Everything you need for 2500/Flu to 2700 conversion in one package. Instructions included, including instructions for conversion between the three different boots http://public.box.net/2500_full_kit and select appropriate section Read the instructions properly in the section you have chosen. PLEASE DO NOT ATTEMPT WITHOUT READING INSTRUCTIONS. |