VS Extreme help - keeps autorolling

Minu Bronze Member Username: M108 Post Number: 16 Registered: Jun-06	Posted on Monday, May 19, 2008 - 20:45 GMT I have a VS extreme and VS Ultra. Both were working fine till yesterday. Today the Ultra is working but for the Extreme it says "Autoroll Processing" I did not read in the form that bins have changed so I RELOADED DBPSW-080514X and still it says "autoroll processing" Need your help in knowing what is wrong. Thanks MA
kate Silver Member Username: Themangod Post Number: 367 Registered: Oct-06	Posted on Monday, May 19, 2008 - 20:58 GMT turn it off then back on
Doreen Gold Member Username: Doreenakadj Ontario Canada Post Number: 1630 Registered: Dec-06	Posted on Monday, May 19, 2008 - 22:12 GMT reboot from the back switch
Doreen Gold Member Username: Doreenakadj Ontario Canada Post Number: 1631 Registered: Dec-06	Posted on Monday, May 19, 2008 - 22:15 GMT VS Extreme is still working fine
Minu Bronze Member Username: M108 Post Number: 17 Registered: Jun-06	Posted on Tuesday, May 20, 2008 - 00:13 GMT Thanks for your responses. Tried switching off from back switch - no luck. Ultra working fine but Extreme is stuck in autoroll processing !!! Anything else I could do ? Thanks MA
METALLICA Silver Member Username: Metallica Post Number: 723 Registered: Jan-08	Posted on Tuesday, May 20, 2008 - 00:31 GMT Minu..first go to your Antenna setup see anything have change.. if your Antenna Setup look fine than do this delete all your channels and do a AUTOSCAN..