Bronze Member Username: MukiPost Number: 10 Registered: Sep-07 | I have a FLU converted to 2700.I wanted to convert it to PUFF.By mistake I run 2500 Convertion to PUFF files and loaded Booth60 and the new PUFF bin for FLU 2700.Now I only have nightrider on display.How do I fix this? Thanks |
Platinum Member Username: NydasPost Number: 10552 Registered: Jun-06 | 1. reinstall b60 boot. 2. install 294T BIN 3. Install PUFF BOOT/BIN_253. 4. Install the latest PUFF BIN. Everything you need for 2500/Flu to 2700 conversion in one package. Instructions included. Either b75 or PUFF http://public.box.net/2500_full_kit |
Bronze Member Username: MukiPost Number: 11 Registered: Sep-07 | Thanks Nalin |
Bronze Member Username: MukiPost Number: 12 Registered: Sep-07 | Nalin, After I run b60 and 294T it showed "ON" on the display.Than I run 253 and the latest 265 Puff bin.Now I have again only the knight rider (----) on display |
Platinum Member Username: NydasPost Number: 10553 Registered: Jun-06 | I just helped somebody and discovered the quirks of UKR _265 BIN. The UKR BIN_265 erases the key slate. Also go through the full user setup. You have to do default keys. If you have not rescanned, you may have to rescan. IT DOES WORK |
Bronze Member Username: MukiPost Number: 13 Registered: Sep-07 | I only have ---- on my display.How do I set the default key |
Platinum Member Username: NydasPost Number: 10557 Registered: Jun-06 | Go to Menu and you will see it. |
Bronze Member Username: MukiPost Number: 14 Registered: Sep-07 | I loaded the factory bin Lifetime Ultra_040406_229_api_1.On my display I have ON now.I loded the b-75 boot after that and again I have only ---- now |
Platinum Member Username: NydasPost Number: 10568 Registered: Jun-06 | I think you are going about with your own agenda and method instead of following instructions. Nowhere is there any instruction about loading factory BIN. You have to start all over again with b60 Boot and 294T BIN - NOT FACTORY BIN. when you load the PUFF Boot/BIN it must be the 640K file. |