Archive through April 26, 2008
|
Silver Member Username: Mshah2006Ontario Canada Post Number: 144 Registered: Jan-06 | I also need help with my other receiver that died a few days ago. For a Fortec Lifetime Ultra which was revived (By a technician)after no lights on the front panel. What I have to do to make it work. I believe I have to go through conversion process to Pansat2500 and then load the latest bin file. But I am not sure. |
|
Silver Member Username: Mshah2006Ontario Canada Post Number: 145 Registered: Jan-06 | Thank you Metallica. I like the small moving sticker. |
|
Gold Member Username: PlymouthQuebec city, Quebec Canada Post Number: 1667 Registered: Jan-08 | Good news Mr Shah read this info on Fortec Ultra: http://www.kashbrand.com/F_T_A_4.html or start a NEW THREAD for help https://www.ecoustics.com/electronics/forum/home-video/35.html Good luck |
|
Silver Member Username: Ather_da_donMississauaga, Ontario Canada Post Number: 464 Registered: Oct-07 | Newest releases at |
|
Silver Member Username: HaloToronto, Ontario Canada Post Number: 470 Registered: Oct-07 | All new files at |
|
Bronze Member Username: Fta67Manitoba Island Post Number: 14 Registered: Jan-08 | Nalin, question for you: where can I find the PUFF LZMA 262 bin? I see a lot of 262 bins including PUFF, b75, and a new Team-PUFF, but where is the LZMA version? are the coders going to change to a new PUFF standard??? very confusing my friend. |
|
Silver Member Username: MetallicaPost Number: 610 Registered: Jan-08 | FTA..i think the coders have stop working on the LZMA bin now.. i think you better convert it back to PUFF...only PUFF..LZMA DEAD.  |
|
New member Username: Edd5556Post Number: 5 Registered: Jul-07 | How long does it normally take for new bins to come out after DN and Bev have gone down. I just moved back to country from city and it used to be only a matter of minutes before new bins were available. thx |
|
Silver Member Username: MetallicaPost Number: 612 Registered: Jan-08 | Ed it depends on what recevier have.. some might takes a few hours and other might takes day or 2...C00lsat just take a little longer than everyone else.  |
|
New member Username: RockymaxPost Number: 2 Registered: Mar-08 | I have a Pansat 2700A Clone. I converted to B75 which worked fine. As suggested in the threads, it is best to convert to PUFF. I would like to do so, but the PUFF documentation at: |
|
Silver Member Username: MetallicaPost Number: 613 Registered: Jan-08 | Rocky...you can not use your 2700 Clone to convert to PUFF...and there are no PUFF file to convert to any PS 2700 Clone or not Clone.. PUFF file is for the PS 2500 to convert.. |
|
Bronze Member Username: SwredneckHalifax, N.s. Canada Post Number: 64 Registered: Jul-07 | hmmm got an s v 1000 put newthing on it got d n no bev this is a first i switched from win zip to cam unzip the hole set upisdif as u pro alkready no ! i was wunderin if i wasgettin the whole file lol isanyone else havin this prob with the new bin ? |
|
New member Username: RockymaxPost Number: 3 Registered: Mar-08 | Metallica...Thank you!! You guys are a wealth of information and a great resource for FTA hobbyists. |
|
Bronze Member Username: SwredneckHalifax, N.s. Canada Post Number: 65 Registered: Jul-07 | thanks all u u s.v fans!fock |
|
Bronze Member Username: Fta67Manitoba Island Post Number: 15 Registered: Jan-08 | Metallica, thanks for the info. I downloaded the latest files from Nalin's public place and succesfuly converted my stb to the new PUFF_1.0.1 all is good once again. |
|
Silver Member Username: MetallicaPost Number: 616 Registered: Jan-08 | Rocky Max and FTA67 You're  |
|
Silver Member Username: Ather_da_donMississauaga, Ontario Canada Post Number: 465 Registered: Oct-07 | New keys and new files including PUFF are at |
|
Bronze Member Username: FulaliPost Number: 35 Registered: Sep-06 | Is Dishnet(148) is down? Mine VS Ultra is not getting signal from 148(Searching Signal) but 119 is fine. |
|
Bronze Member Username: JasoradicalcoolToronto Canada Post Number: 26 Registered: Feb-08 | IS ARIZA DOWN? IF SO CAN U GIVE ME A LINK TO GET THE FILE BECAUSE I CANT SEEM TO FIND IT THANKSSSSS |
|
Silver Member Username: MetallicaPost Number: 617 Registered: Jan-08 | Jason there are no new file for ARIZA |
|
Bronze Member Username: SwredneckHalifax, N.s. Canada Post Number: 66 Registered: Jul-07 | i can t get bev to come in dn workin fine any one no whats goin down here i ve tryed everything i can thing of !!plzzz help |
|
Bronze Member Username: SwredneckHalifax, N.s. Canada Post Number: 68 Registered: Jul-07 | i have a s v 1000 |
|
Bronze Member Username: JasoradicalcoolToronto Canada Post Number: 27 Registered: Feb-08 | THANKS ALOT |
|
New member Username: Edd5556Post Number: 6 Registered: Jul-07 | does anyone know if and when the new keys will be coming. And does it always take 4 days to get them. |
|
Silver Member Username: HaloToronto, Ontario Canada Post Number: 472 Registered: Oct-07 | For the latest dish abd bev keys and info check out |
|
Bronze Member Username: SidthekidPost Number: 93 Registered: Dec-07 | New update and keys at |
|
Silver Member Username: Ather_da_donMississauaga, Ontario Canada Post Number: 466 Registered: Oct-07 | new keys at |
|
New member Username: Edd5556Post Number: 7 Registered: Jul-07 | everyone keeps posting where I can get new keys when they are available but no one answers my questions which are does it always take so long when they go down to get new ones and is it usual for it to take so long this time. p.s. |
|
Silver Member Username: Mshah2006Ontario Canada Post Number: 146 Registered: Jan-06 | Plymouth...Thank you for sending me the new info on Fortec Lifetime Ultra. I am sorry I did not come on the internet for few days so thanking you was delayed. You sent me the following info: Good news Mr Shah read this info on Fortec Ultra: http://www.kashbrand.com/F_T_A_4.html or start a NEW THREAD for help https://www.ecoustics.com/electronics/forum/home-video/35.html Good luck |
|
Silver Member Username: HaloToronto, Ontario Canada Post Number: 475 Registered: Oct-07 | |
|
Bronze Member Username: JasoradicalcoolToronto Canada Post Number: 28 Registered: Feb-08 | is it possible to convert ariza 700 to pansat???? if so is it a good idea?thanks |
|
Silver Member Username: Ather_da_donMississauaga, Ontario Canada Post Number: 467 Registered: Oct-07 | I'm not too sure jason if you can convert it. I would think it would be not a great idea to do so. There's my opinion. Other Ariza Files and new keys are at |
|
New member Username: Partner500Post Number: 5 Registered: Apr-08 | visit http://www.earthhourblog.blogspot.com FOR INFO ON NAGRA 3 BEING DECODED!!! |
|
Silver Member Username: Ustaad_hcPost Number: 591 Registered: Oct-06 |  |
|
Bronze Member Username: Fta67Manitoba Island Post Number: 16 Registered: Jan-08 | Hello everyone, DN is down on my stb, can anyone confirm please??? If so, we are going to need new bin files. |
|
Bronze Member Username: Pdee333Post Number: 36 Registered: Nov-07 | Cheap Cheap Cheap... 3 Ar*za receivers |
|
Bronze Member Username: SwredneckHalifax, N.s. Canada Post Number: 69 Registered: Jul-07 | both are down on mine ! |
|
Bronze Member Username: JasoradicalcoolToronto Canada Post Number: 29 Registered: Feb-08 | thanks |
|
Silver Member Username: HaloToronto, Ontario Canada Post Number: 476 Registered: Oct-07 | All new files will be released at |
|
New member Username: JcontrePost Number: 5 Registered: Mar-08 | Clone Puff 2500 to 2700 Pansat bin anyone? |
|
Gold Member Username: Way2smartWww.Desifta.com Post Number: 1521 Registered: Oct-06 | NO PUFF YET BUT ALL OTHER REC FIXES ARE HERE AT [link removed] |
|
Bronze Member Username: SidthekidPost Number: 94 Registered: Dec-07 | All new files out at Ps,VS,CW,SW + more so check it out! |
|
Silver Member Username: HaloToronto, Ontario Canada Post Number: 480 Registered: Oct-07 | |
|
Silver Member Username: Ather_da_donMississauaga, Ontario Canada Post Number: 468 Registered: Oct-07 | |
|
Silver Member Username: Mshah2006Ontario Canada Post Number: 147 Registered: Jan-06 | Since I purchased NFusion, it has been running up and fine. If somebody is looking for new receiver, I would suggest spend a bit more ($180-200) and get peace of mind. You will need internet to hook this receiver with it. It automatically updates or you can download the new file just by clicking on the internet icon (On screen) and start downloding the new upgrade. Just wanted to share the experience. |
|
Gold Member Username: PlymouthQuebec city, Quebec Canada Post Number: 1863 Registered: Jan-08 | Happy for you Mr. Shah |
|
New member Username: RockymaxPost Number: 4 Registered: Mar-08 | I have not seen bins specific to the clones. Will this bin (X-87BL_080416_B75_263_api) work on a Pansat 2700 Clone? |
|
Silver Member Username: PulpfiktionPost Number: 134 Registered: Mar-08 | Rocky --U do not use that on a clone. Use the clone safe file. New Fix for Clone 2700's and Originals. Please Set Default Keys after loading. File Type: zip Pansat-C 2700 263v1 TiVo.zip (531.0 KB) Look for it in ftabins.net f2atv.com ftatalk/com crazyfta*com |
|
Platinum Member Username: NydasPost Number: 10193 Registered: Jun-06 | Genuine Pansat 2700 x-87bl_080328_b75_261_api.bin Clone Pansat 2700 manufactured as a 2700 clone Pansat-C 2700 261v1 TiVo.bin. Do NOT use on conversions. OK to use on genuine 2700. Conversions: b75 Use any of the ones below Lothario_261_(B-75).bin dans_261.bin 261_p122654_AIO.bin These BINs will henceforward have the word b75 in the file name Conversions: PUFF. Use any of the ones below Jvvh_Fortec-Pansat_261_(PUFF).bin Jvvh_261_Nkk_PUFF.bin Lothario_261_PUFF.bin Saif_Bin_261_Spaceblast_BG (PUFF).bin Ukr_261-PUFF-.bin These BINs will henceforward have the word PUFF in the file name |
|
Silver Member Username: HaloToronto, Ontario Canada Post Number: 482 Registered: Oct-07 | All new files out at |
|
New member Username: RockymaxPost Number: 5 Registered: Mar-08 | Visual: Thank you for the sites!! Got it. Nalin: Thanks for the info. I guess I'll have to stick to the Tivo bins for my 2700 clone. |
|
Platinum Member Username: NydasPost Number: 10196 Registered: Jun-06 | Everything for 2500/Flu to 2700 conversion in one package. Instructions included. Either b75 or PUFF. LZMA version not available. http://public.box.net/2500_full_kit All downloaded zipped files should be unzipped into a separate directory named appropriately. |
|
Silver Member Username: HaloToronto, Ontario Canada Post Number: 483 Registered: Oct-07 | all files and info at |
|
Bronze Member Username: ParathesiPost Number: 40 Registered: Oct-06 | cools*t 5000 Bin 173.at |
|
Bronze Member Username: AbusubhanPost Number: 27 Registered: Sep-07 | what is the compus location of 61.5? Anyone please... Thanks |
|
Bronze Member Username: AbusubhanPost Number: 28 Registered: Sep-07 | suppose the number of degrees on the compus is 360 |
|
Silver Member Username: PulpfiktionPost Number: 174 Registered: Mar-08 | Look at a Geography map for longitude 61.5W. Look at site lyngsat dot com for more information. |
|
Gold Member Username: PlymouthQuebec city, Quebec Canada Post Number: 1898 Registered: Jan-08 | AbuSubhan If you are located in Mid-west or west you can choose 148W Use this for aligned: http://www.dishpointer.com/ Dont point on your house. |
|
Bronze Member Username: AbusubhanPost Number: 29 Registered: Sep-07 | Thank you both Plymouth & Pest Control I am in Toronto... just moved in a condo...with there shity rules of no dish. I was trying to hookup one dish on table in the Balcony/Patio as it is facing south-east. Hope I will get it to work if I can point it into the right direction. Thanks anyways, |
|
Silver Member Username: HaloToronto, Ontario Canada Post Number: 484 Registered: Oct-07 | go to |
|
Bronze Member Username: SkeptikArtica Post Number: 53 Registered: Oct-07 | anybody on where they sell db-9 to usb cables//?? |
|
Silver Member Username: MetallicaPost Number: 639 Registered: Jan-08 | Best Buy and Radio Shack |
|
Platinum Member Username: NydasPost Number: 10236 Registered: Jun-06 | If you have an old Windows 98, you are OK. Otherwise buy one with its own installation CD, and when you install in XT, make sure you DO NOT ALLOW XP to install it. do a manual installation using the CD. Next go into Device Manager and make sure your COM is set to port 1 or 2. |
|
Silver Member Username: RekmanMntl-Quebec-... Post Number: 366 Registered: Jun-06 | Hi Nalin... am back after long break.... as i told you i have cools*t 5000.... with lnb 118-119. for the time being i dont have the actual BIN... BUT my STARPLUS channel is working SUPER DUPER FINE !!!! i am satisfied with this... can you explain to y is this huh??? another question i recently downloaded COOLS*T PRO LOADER v 2.4 on my laptop so that i wont have to unbranch etcc.. etcc..to bring to the deskstop... but with the laptop when i am click CONNECT so as to download the BIN... its saying ""No available COM port.."" wat shud i do to be able to download the bin.... |
|
Gold Member Username: PlymouthQuebec city, Quebec Canada Post Number: 1987 Registered: Jan-08 | Hi MKM how are you tonight? You try to load with USB port? |
|
Silver Member Username: RekmanMntl-Quebec-... Post Number: 367 Registered: Jun-06 | heyyy plymouth... how r u my friend... yes yes am trying to download the new bin 173. but the proloader v2.4 is saying "no available CM"". dnt know wat this mean.. can you help me please. by the way r happy to be warm up with the great SUN... we all were waiting for.... b |
|
Gold Member Username: PlymouthQuebec city, Quebec Canada Post Number: 1989 Registered: Jan-08 | MKM uninstall software for USB to RS-232 and reinstall it and retry to load I,m fin and happy Canadiens win  |
|
Bronze Member Username: ValinexPost Number: 23 Registered: Mar-06 | Plymouth, if you recall, I had problems with my ViewS*t. I discovered it was a clone, and had it changed to a good unit. Now it is working perfectly. I need to renumber the channels sequentially starting with 1. Is this the command of renumber by SID ? I do not see any other command. |
|
Gold Member Username: PlymouthQuebec city, Quebec Canada Post Number: 1997 Registered: Jan-08 | Valinex choose SID you are right. Never Never buy a clone Good tv my friend |
|
Bronze Member Username: SkeptikArtica Post Number: 54 Registered: Oct-07 | anybody having problems with Nkk_jvvh 263 PUFF? |
|
Bronze Member Username: Anelie2006Saint luuu, Mo Us Post Number: 39 Registered: Mar-07 | how come my stuff went scrambled and it came back i thought i needed a new bin untill i came home |
|
New member Username: Rtw000Post Number: 2 Registered: Dec-07 | DN started freezing today, about every one or two minutes. Anybody having this problem? |
|
Silver Member Username: HaloToronto, Ontario Canada Post Number: 485 Registered: Oct-07 | latest bin files are at |
|
Platinum Member Username: NydasPost Number: 10306 Registered: Jun-06 | There have been minor freezing problems. Viewsats have released new BINs with freezing fix. Turn receiver off and ON again after 210-30 seconds |
|
Bronze Member Username: VhdPost Number: 21 Registered: Jul-06 | Nalyn, do you know what's going on? The fix at ftasolu... does not work on mine viewsat platinum. where can i get the right fix? |
|
Platinum Member Username: NydasPost Number: 10308 Registered: Jun-06 | For reliable BINs, Try [link removed] [link removed] |
|
Gold Member Username: PlymouthQuebec city, Quebec Canada Post Number: 2016 Registered: Jan-08 | You can take it to dsstesterDOTcom Work fine no need to login |
|
Platinum Member Username: NydasPost Number: 10311 Registered: Jun-06 | D N Provider ID (0101) [Last update: Wed. Apr 23, 10:38 PM Eastern] Key 00 (86): 93 0E 04 0B AC F9 07 29 86 F5 89 B5 D5 DA 3E 99 Key 01 (96): 59 CB 77 4A 61 A7 1C 81 2A DF 0F 69 36 BC 9F 4D |
|
Bronze Member Username: VhdPost Number: 22 Registered: Jul-06 | Hm...Nalin, I try PFTAUSW-080424U.PGM twice but it does not work. Only have black & white color with no signal.??? Help |
|
Bronze Member Username: VhdPost Number: 23 Registered: Jul-06 | OK, I have signal and blue window now, but it says no video or audio? |
|
Silver Member Username: MetallicaPost Number: 640 Registered: Jan-08 | v h d Bronze Member Username: Vhd Post Number: 22 Registered: Jul-06 Posted on Wednesday, April 23, 2008 - 11:56 pm: -------------------------------------------------------------------------------- Hm...Nalin, I try PFTAUSW-080424U.PGM twice but it does not work. Only have black & white color with no signal.??? Help VHD...why are you using Viewsat Ultra bin on your Platinum??? that bin is for the VS Ultra..PFTAUSW-080424U.PGM.. this is the right bin for your Platinum.. Dbpsw-080424p-1 |
|
Silver Member Username: MetallicaPost Number: 641 Registered: Jan-08 | VHD...here little infor for you.. when you see the bin end with the U is for Ultra.. end with the P is for Platnium...and end with the X is for Extreme..  |
|
New member Username: LmhPost Number: 5 Registered: Jun-06 | There is a new ECM coming at 4 pm EST today Apr 24 |
|
Platinum Member Username: NydasPost Number: 10319 Registered: Jun-06 | It is past 4.00 pm Eastern and there is no ECM. |
|
Bronze Member Username: Rockman169Canada Post Number: 25 Registered: Nov-06 | could some one tell me if the new sonicview 360 has a ordinary usb port it says it features a usb 2.0 port |
|
Platinum Member Username: NydasPost Number: 10325 Registered: Jun-06 | For the past two years all computers come with a usb 2.0. |
|
Bronze Member Username: Rockman169Canada Post Number: 26 Registered: Nov-06 | so nalin i would not be able to up date it with a normal usb flash drive like the one i use for the vs ultra.my computer is 4 year old thanks |
|
Platinum Member Username: NydasPost Number: 10329 Registered: Jun-06 | As far as I know a USB 2.0 drive can accept data at lower speeds from your computer e.e. from USB 1.0 port. then you take it to your viewsat ultra which will accept it anyway. I am not quite sure what you are tyr to establish or deny yourself. A light bulb capable of 100 watts can always be used via a resister to give 50 watts (dimmer switch), and yet it be taken to an ordinary circuit and shine at 100watts. I hope you understand the analogy. A light bulb designed to withstand 220Volts of England or India, can be used in North America under 110V - if you can get the right fitting. |
|
Bronze Member Username: Rockman169Canada Post Number: 27 Registered: Nov-06 | so nalin , the 1.0 and the 2.0 are different size ports . the reason I'am asking is i tried to update a vs 4000 and the usb flash drive would not acually fit in the reciever that I use for my vs. Sorry for the confusion. thanks |
|
Bronze Member Username: VhdPost Number: 24 Registered: Jul-06 | METALLICA, I was rush into that bin and did not paid attention to the letter U at the end. Thanks for reminding me. "...here little infor for you.. when you see the bin end with the U is for Ultra.. end with the P is for Platnium...and end with the X is for Extreme..." |
|
Bronze Member Username: VhdPost Number: 25 Registered: Jul-06 | Many channel has been removed such as Sci-fi and ESPN, is this right? I rescan the both 119 and 110 but did not get either one of them. |
|
Platinum Member Username: NydasPost Number: 10336 Registered: Jun-06 | If you have access to radio shack, futureshop, bestbuy, stripmall computer shop, just go in and get the right USB 1 to 2 adaptor or buy a USB 2.0 PVI card and add it to your computer. |
|
Bronze Member Username: VhdPost Number: 26 Registered: Jul-06 | It looks like i have a wrong LNB type set up. Anyone know what type of LNB i should choose to get both 119 and 110 echostar? |
|
Silver Member Username: MetallicaPost Number: 647 Registered: Jan-08 | Sci-fi on Echo 7..119W Channel 122 ESPN on Echo 7...119W Channel 140 both are still there and try to delete all your channels on Echo7 than do a Auto Scan again. |
|
Bronze Member Username: VhdPost Number: 27 Registered: Jul-06 | METALLICA, I erase all channels and run the autoscan but get no ppv, sci-fi, or ESPN. I do have other channels. What should I do? |
|
Bronze Member Username: VhdPost Number: 28 Registered: Jul-06 | Just got all channels back by switching LNB types. |
|
Silver Member Username: MetallicaPost Number: 648 Registered: Jan-08 | VHD...good for you.. Now wirte down all of your Antenna Setup so next time you know what you need to put back in...all the LNB TYPE and the Diseqc port. |
|
New member Username: Comanche2382Post Number: 2 Registered: Dec-07 | Just installed 263PUFF.bin into my converted pansat 2500a, after bin is loaded all I get is PUFF scrolling twice and stops and scrolling begins again? What did I do wrong? I've done this 100's of times. |
|
New member Username: LupefiascoMississauga, Ontario Canada Post Number: 1 Registered: Apr-08 | New Keys at |
|
Platinum Member Username: LklivesPost Number: 15461 Registered: Jan-06 | Dish Network (0101) [Last update: Sat. Apr 26, 4:42 PM CDT] 86: C5 92 A7 F8 30 AE 8B A5 7D B0 AD 61 C6 CC A5 BF New 96: 68 79 D8 7B F3 51 D1 4B 55 E7 2C A1 47 8C 14 79 |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics