For Nalin Nyda

slick Bronze Member Username: Vicb Post Number: 52 Registered: Jan-07	Posted on Friday, May 02, 2008 - 17:26 GMT i got my quaity back up to 97 did a facorty default re-loaded all files... still just rolling on my viewsat . by the way nalin in my antenna settings should my 22khz be: on or off for echo 7 & 8???
slick Bronze Member Username: Vicb Post Number: 53 Registered: Jan-07	Posted on Friday, May 02, 2008 - 17:43 GMT nalin could it be my transponders?? i live in south florida and echo 7 says 12224 so does echo 8 12224 should they be different??
Pleasersmiles Bronze Member Username: Pleasersmiles Post Number: 34 Registered: Nov-07	Posted on Friday, May 02, 2008 - 18:52 GMT Slick: Although my DN is not presently working. Location: North GA/TN Line PANSAT 3500SD (Secure Digital) Receiver Menu/Installation/Pass/SatSetup SAT: Echo7@119 Standard 11,250 Off DiSEqC #4 None SKEW 0 12224. V20.000 1.2 Scan: All ------ SAT: Echo6,8@110 Standard 11,250 Off DiSEqC #2 None SKEW 0 12224. V20.000 1.2 Scan: All Trust information is helpful
slick Bronze Member Username: Vicb Post Number: 57 Registered: Jan-07	Posted on Friday, May 02, 2008 - 18:59 GMT thank u
Pleasersmiles Bronze Member Username: Pleasersmiles Post Number: 35 Registered: Nov-07	Posted on Friday, May 02, 2008 - 19:06 GMT Slick As you can see, I'm a newby, too. One thought: Is your Autoroll "ON"? Menu/ParentalContol/SecondPin/Autoroll/Select On Although my autoroll was "on" before, currently it was set to "off".
Plymouth Gold Member Username: Plymouth Quebec city, Quebec Canada Post Number: 2101 Registered: Jan-08	Posted on Friday, May 02, 2008 - 19:31 GMT Keep autoroll on you need it for roll new keys
slick Bronze Member Username: Vicb Post Number: 58 Registered: Jan-07	Posted on Friday, May 02, 2008 - 19:34 GMT trust me it is on .. this has been happening since thrs. if i leave it on autoroll it will eventually turn on after a few hours.. tha ks anyways.
Plymouth Gold Member Username: Plymouth Quebec city, Quebec Canada Post Number: 2102 Registered: Jan-08	Posted on Friday, May 02, 2008 - 19:35 GMT 119 12486 110 12326 You need it just for be sure you are on good sat No need it for autoscan
African Gold Member Username: Kirankumar NO Bashing Post Number: 2659 Registered: Oct-07	Posted on Friday, May 02, 2008 - 19:43 GMT do this and it will work all receivers are up on DN b@v is down,locals are up,wait for new fix for people having problem getting dn do a hard reboot,make sure auto roll is on then leave it on any one channel until picture comes up,it may take up to 10 minutes do not keep changing channels until picture comes up
Pleasersmiles Bronze Member Username: Pleasersmiles Post Number: 37 Registered: Nov-07	Posted on Friday, May 02, 2008 - 19:56 GMT African I reinserted BIN/Hard Reboot/AutoRoll ON/Left on one channel for 30 minutes with no success. Can change to 119 12486/110 12326 Press OK as instructed. However, both sats return to: 12224 Pansat 3500sd Receiver Location: North GA/TN Line PANSAT 3500SD (Secure Digital) Receiver Menu/Installation/Pass/SatSetup SAT: Echo7@119 Standard 11,250 Off DiSEqC #4 None SKEW 0 12224. V20.000 1.2 Scan: All ------ SAT: Echo6,8@110 Standard 11,250 Off DiSEqC #2 None SKEW 0 12224. V20.000 1.2 Scan: All Suggestions?
Pleasersmiles Bronze Member Username: Pleasersmiles Post Number: 38 Registered: Nov-07	Posted on Friday, May 02, 2008 - 20:21 GMT African BIN 379-a
African Gold Member Username: Kirankumar NO Bashing Post Number: 2663 Registered: Oct-07	Posted on Friday, May 02, 2008 - 20:24 GMT try hooking up one of your satellites directly to receiver,bypass the switch using a coupler and post results
Pleasersmiles Bronze Member Username: Pleasersmiles Post Number: 39 Registered: Nov-07	Posted on Friday, May 02, 2008 - 22:15 GMT African Sorry for wait to respond (Had to buy a coupler.) Outside: Hooked up satellite cable 6,8@110/coupler/Receiver. Inside: Reconnect cable to receiver/Turn on receiver. Installation/Antenna Setup/ Standard LNB 11250 22kHz Off DiSEqC #2 (even though it's not hooked up Legacy SW None Skew 0 TP [23]12516 V 20.000 Position Setting 1.2 Satellite scan All Level 75+% Quality 92+% Exit to channel. Wait for picture/ 15 minutes later still counting. Suggestion/s? Advanced thanks for assistance.
Kimberly Bronze Member Username: Realtorkim INDIANA United States Post Number: 75 Registered: Oct-06	Posted on Friday, May 02, 2008 - 22:30 GMT Thanks All for info Pansat 2700 Changed nothing only re-boot from reading all of your recent posts. Your Great... All working just fine. Talk soon till next time lol Thank-You
Saviorself Bronze Member Username: Kocsuckercartier Post Number: 20 Registered: Apr-08	Posted on Saturday, May 03, 2008 - 16:23 GMT
LK. Bronze Member Username: Lklies Post Number: 28 Registered: May-08	Posted on Saturday, May 03, 2008 - 16:28 GMT Kimberley... New ECM since yr last post. Enter 0101 and 0901 keys manually, if U have to.

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us