Archive through April 10, 2008
|
Platinum Member Username: NydasPost Number: 9845 Registered: Jun-06 | First time round you have to go through the full ritual of setting up the receiver after loading the BIN and then scanning. Later on, much of the headache can be avoided, if you have channel master - a piece of software in your computer to save the channels and your full setup. So for subsequent BIN loads including changing from one BOOT to another, You save the setup using channel master, load the new BIN, and then install your save channel setup. Reading and understanding new software takes time, but it is worth it. The only thing that Channel Master does not tell you is that although you use the same cables for connecting, you have tell channel master that you have "Pansat 2700 or 3500" |
|
Platinum Member Username: NydasPost Number: 9848 Registered: Jun-06 | M. Shah: I saw an earlier post of yours where you said you could not find a file and loaded another. YOU CAN'T DO THAT except where permitted. The only thing permitted is 1. Selection of Background picture 2. selction of latest BIN WITHIN THE GROUP. This means that if you see b 7 5 scrolling you use a b75 BIN. If you see PUFF scrolling you use a PUFF BIN and if you see PUFF. twice and a stop, it menas it is a LZMA boot and you have to use LZMA BIN. To cross these boundries you have to use special tools and methodologies designed to change the bOOTs and BINs. The worst thing you can do is to say, "I could not find this file, so I used the other file" That is absolute NO- NO |
|
Silver Member Username: Ather_da_donMississauaga, Ontario Canada Post Number: 455 Registered: Oct-07 | Whoever has not made the PUFF transfer, can still get the b-75 261 bin at |
|
Silver Member Username: Ather_da_donMississauaga, Ontario Canada Post Number: 456 Registered: Oct-07 | There are also links on the side which give you other files! |
|
Bronze Member Username: ValinexPost Number: 20 Registered: Mar-06 | If there are no more bins coming for cs 4000, 5000 & 6000, then support is gone. Except I do not understand why no one else comes with a bin, other than the manufacturer of these units. |
|
Silver Member Username: Ather_da_donMississauaga, Ontario Canada Post Number: 457 Registered: Oct-07 | Valinex... I'm not too sure, but i think only the support team can get the files! ONLY THEM.., |
|
Silver Member Username: Mshah2006Mississauga, Ontario Canada Post Number: 114 Registered: Jan-06 | My converted Fortec Lifetime Ultra (FLU) receiver has gone blank. No signs of life in the display. It occured after working for few minutes just after loading Bin 261 for b75. Is there a solution to my receiver or it has gone kaput. |
|
Silver Member Username: Mshah2006Mississauga, Ontario Canada Post Number: 115 Registered: Jan-06 | Hi Nalin... On my second receiver I only loaded b75 bin #261 and same thing happend with that receiver too. It worked for a few minutes like 20 minutes and then went blank with no lights on the receiver display. Do you think it is still a software problem or the receivers are gone for ever? Please suggest. Thank you. |
|
Bronze Member Username: ValinexPost Number: 21 Registered: Mar-06 | Dr. Dre, if it is the support group that can issue new bins, they would continue to issue it for the cs 4, 5, & 6000. But if the support group is paid by the manufacturer to force the purchase of newer models, then this will point the finger at the manufacturer. If you know what I mean. There are older units than the cs that are still getting their new bins. |
|
Bronze Member Username: ParathesiPost Number: 36 Registered: Oct-06 | I have converted my panst 2500 clone receiver to puff.Is there any way to revert puff conversion to b75 . or original b60 boot. If anyone knows can you please post the method |
|
Silver Member Username: Mshah2006Mississauga, Ontario Canada Post Number: 116 Registered: Jan-06 | I need a new receiver which is the best and still under $200? |
|
Silver Member Username: Mshah2006Mississauga, Ontario Canada Post Number: 117 Registered: Jan-06 | Some body give suggestions on buying new receiver. What should be looked at before buying a new receiver? |
|
Diamond Member Username: LklivesPost Number: 15181 Registered: Jan-06 | 1000 posts here with the answers.. get a USB ready receiver conaxsat mini captiveworks 700 sonicview 4000 viewsat ultra or get a Nfusion with IKS, internet self updating.. |
|
Platinum Member Username: NydasPost Number: 9880 Registered: Jun-06 | Selling receivers now? |
|
Silver Member Username: Ather_da_donMississauaga, Ontario Canada Post Number: 458 Registered: Oct-07 | LK is write. USB ready receivers are a lot better. But... FOR dish keys and files go to |
|
Silver Member Username: Mshah2006Mississauga, Ontario Canada Post Number: 118 Registered: Jan-06 | LK...Thank you for suggesting receivers. I hope they will not become obsolete too soon. |
|
Silver Member Username: Mshah2006Mississauga, Ontario Canada Post Number: 119 Registered: Jan-06 | What is the real advantage of buying Nfusion NOVA over other receivers. I see in a comparison where the processor speed for NFusion is only 120MHz compared to Vewsat Ultra which is 200MHz and Conaxsat is 200MHz Captiveworks 800s is 160MHz. and so the memory for NFusion is only 16MB compared to others which is 32 or 64MB. Nfusion does not have Highspeed USB where as SonicView400, Conaxsat and Captiveworks 800s all have high speed USB. |
|
Silver Member Username: RekmanMntl-Quebec-... Post Number: 358 Registered: Jun-06 | hi Nalin... bin for cools*t is out or not??? Nalin.... if i was supposed to buy a new receiver...... which receiver would you advice me to buy??? i am planning to buy one bcoz the cools*t is always always the LAST to releaase bin.... ... advice please...THANKS |
|
Silver Member Username: RekmanMntl-Quebec-... Post Number: 360 Registered: Jun-06 | hi Nalin... bin for cools*t is out or not??? Nalin.... if i was supposed to buy a new receiver...... which receiver would you advice me to buy??? i am planning to buy one bcoz the cools*t is always always the LAST to releaase bin.... ... advice please...THANKS |
|
Platinum Member Username: PlymouthQuebec city, Quebec Canada Post Number: 1524 Registered: Jan-08 | Hi MKM how are are you this afternoon |
|
Platinum Member Username: PlymouthQuebec city, Quebec Canada Post Number: 1525 Registered: Jan-08 | Friday i buy a CW600s premium Cheap to buy and work fine Buy it, colsat 5000 dont have good support now |
|
Silver Member Username: Mshah2006Mississauga, Ontario Canada Post Number: 120 Registered: Jan-06 | MKM... Buy CaptiveWorks700S or CW800S you will be fine. They will cost $120 to $140 since I have already done some research. |
|
Bronze Member Username: Leidy08Post Number: 56 Registered: Jun-07 | Hello, I need some help. I converted aFortec Start to a Pansat 2700 it was ok I was watching the TV but them the receiver when OFF, Can some one tell me what do I need to changed any receptor. |
|
Platinum Member Username: NydasPost Number: 9896 Registered: Jun-06 | Margarita: People at this forum do not like multiple posts with a level of emphasis you have displayed. I have replied you elsewhere. |
|
Bronze Member Username: ValinexPost Number: 22 Registered: Mar-06 | can cs 4000 be cloned to something else ? |
|
Platinum Member Username: NydasPost Number: 9904 Registered: Jun-06 | Apparently you can first jtag convert it to Skyview and then on to CaptiveWorks. If i find confirmation somewhere i will post it. |
|
Diamond Member Username: LklivesPost Number: 15210 Registered: Jan-06 | Nalin and all your aliases....U do NOT know about FTA...and are just a Dishnet official/mole here working with Ecoustics, monitoring the members and FTA news...get out of this thread, and site! Anybody who listens to you deserves the $4000 civil suit that U will have brought down on them.. |
|
New member Username: LklovesPost Number: 10 Registered: Apr-08 | I posted as above only to hurt Nalin and damage his reputation. He is usually a very good poster and advisor. I, LK, wish to apologize |
|
Bronze Member Username: JaggaPost Number: 54 Registered: Oct-06 | Hi, I just purchased a VS Ultra. I need your help to get started. 1. I loaded the recent bin from TotalFTA site "PFTAUSW-080404U.PGM" to my usb drive. 2. Plug the USB to the receiver. what do i have to do next, to get BEV and DN chenels I tried doing blind scan but not getting anything. its says auto rolling processing? Also tried hard boot after blind scan. no use at all. can anyone please explain step by step after i load the bin into reciever. Thank you, |
|
Platinum Member Username: PlymouthQuebec city, Quebec Canada Post Number: 1546 Registered: Jan-08 | Jagga you need to setup all sat What is your system like dish switch and LNB? |
|
Bronze Member Username: UshaUnited States Post Number: 15 Registered: Nov-06 | Nalin,how are you?...I would like to get your option about what receiver i should buy,my old receiver doesn't work and i need something that is good and easy to operate and program,please advise me on this situation and i would like to say to LK,get off Nalin back,he is doing a great service to alot of people. Thanks |
|
Silver Member Username: GregrafPost Number: 112 Registered: Dec-07 | Go ahead take advice from Nalin youll be sorry |
|
Silver Member Username: Mshah2006Mississauga, Ontario Canada Post Number: 121 Registered: Jan-06 | Usha.. You won't be sorry if Nalin suggests you a dependable receiver. |
|
Bronze Member Username: WkbPost Number: 30 Registered: Dec-06 | Hey people, any news about cs 6000. It is very frustrating. |
|
Silver Member Username: MetallicaPost Number: 569 Registered: Jan-08 | CS 4000..5000 and 6000 nothing. i think it time to get something new. Cooolsat SUCK! |
|
Bronze Member Username: WkbPost Number: 33 Registered: Dec-06 | Any suggestions of receivers, Metallica? |
|
Gold Member Username: NydasPost Number: 9918 Registered: Jun-06 | Usha: This is my first reply to you. There are some clever people who not only copy my name and attempt to give my name to their advice, but are clever at hiding it by then erasing the post so that only the current audience receives the post. You got one such post from some idiot. Normally, I would strongly suggest Sonicview 4000 at about $150. However there is one new problem in site, i.e. both Bell and Dish have started new encryption called Nagravision 3. this one has been around in Europe for over 4 moths now and has not been deciphered. Bell is already distributing new cards and Dish is still in the testing phase. This could mean a long blackout and your $150 investment could be sitting idle on top of your TV as a support for a flower vase. CaptivWorks has had very good support and the 600Premium is selling for about $50-65. It does not have a USB drive input. But it will get you by for the next 4 months and you will also be able to look at the HD receivers as the prices come down and the technology matures, so that 3-4 months down the road, you might invest in a HD receiver that will receive whatever you need to receive. You will definitely have a $100 saving and a better HD receiver in 3 - 4 months. For the very same reasons against investing a lot now , I am rejecting investment in Nfusion (about $250) as of now although that is otherwise a very wise move. |
|
Bronze Member Username: ParathesiPost Number: 37 Registered: Oct-06 | Nalin , You gave a very good picture of receivers. Thanks for the advise. Who ever want tyo buy a new receiver. Follow Nalin's advise. |
|
Bronze Member Username: Joe123xyzPost Number: 41 Registered: Oct-06 | Hi guys, please advise...what do you think about Conaxsat Duo? Thanks. |
|
Silver Member Username: Mshah2006Mississauga, Ontario Canada Post Number: 122 Registered: Jan-06 | Hi Nalin... I ended up buying NFusion. Do you think I will need any bin file to start with or it has a factory bin installed? Or please direct me to a site where I can get information on installing new NFusion receiver. I don't see any files listed for NFusion on diffrent sites which normally offer new files. I would really appreciate your help in this matter. God Bless You. |
|
Silver Member Username: Ather_da_donMississauaga, Ontario Canada Post Number: 459 Registered: Oct-07 | Conaxsat is allright, But joe, go for recievers with better support such as sonicview or viewsat. Files and dish keys are always at |
|
Gold Member Username: NydasPost Number: 9932 Registered: Jun-06 | M. Shah: Ask Sada in the main forum. He will guide you through the installation. it is not as straight forward as some receivers. |
|
Silver Member Username: Mshah2006Mississauga, Ontario Canada Post Number: 123 Registered: Jan-06 | Hi Nalin... I don't know where should I address Sada. If I ask the same information from Sada in this forum, I want to know if I will get any response? Your guidance is still needed please. |
|
Silver Member Username: Mshah2006Mississauga, Ontario Canada Post Number: 124 Registered: Jan-06 | Hi Sada... Nalin has referred me to you for help... I ended up buying NFusion. Do you think I will need any bin file to start with or it has a factory bin installed? Or please direct me to a site where I can get information on installing new NFusion receiver for the first time. I don't see any files listed for NFusion on diffrent sites which normally offer new files for all other receivers. I would really appreciate your help in this matter. God Bless You. |
|
Silver Member Username: RekmanMntl-Quebec-... Post Number: 361 Registered: Jun-06 | hi PLYMOUTH & M SHAH...... thank you for replying.. but now am confused... lol !!!... each one is advisin different receiver... tll me which is the best best best best one....... thanks |
|
Gold Member Username: PlymouthQuebec city, Quebec Canada Post Number: 1569 Registered: Jan-08 | MKM how are you tonight you can buy CW 700 or a VS ultra 2 good receiver with good support each one have USB port. CW is cheaper to buy Ultra is easier to setup MKM choose between this two box |
|
Silver Member Username: RekmanMntl-Quebec-... Post Number: 363 Registered: Jun-06 | hi PLYMOUTH & M SHAH...... thank you for replying.. but now am confused... lol !!!... each one is advisin different receiver... tll me which is the best best best best one....... thanks |
|
Silver Member Username: Mshah2006Ontario Canada Post Number: 126 Registered: Jan-06 | MKM Follow what Plymouth is saying. I have purchased NFusion and am unable to setup yet. I need some body who has purchased NFusion and has completed setup. |
|
Silver Member Username: RekmanMntl-Quebec-... Post Number: 364 Registered: Jun-06 | am doing very well plymouth... its only tv program keeping me upset...... .. how about you???? you bought another receiver... wat is CW700???.. |
|
Silver Member Username: Mshah2006Ontario Canada Post Number: 127 Registered: Jan-06 | Hi Every body or the Guruz on this forum: I have purchased NFusion I need help to install NFusion for the first time. Do I need any bin file to make it work? or there has been no bin file releasd for this receiver? If there is one please let me know where to get it. I would reeally appreciate your help. Thank you. |
|
Silver Member Username: MetallicaPost Number: 573 Registered: Jan-08 | M. Shah ask Sada he know a lot about NFusion he will help you out.. |
|
Gold Member Username: PlymouthQuebec city, Quebec Canada Post Number: 1576 Registered: Jan-08 | MKM i buy a CW600s premium But i have 2 laptops for download without unplug this box. The CW700 have a USB port, more easy for download from a PC I'm very fine  |
|
Gold Member Username: PlymouthQuebec city, Quebec Canada Post Number: 1577 Registered: Jan-08 | Mr Shah Start a new thread and ask help to Sada the NFusion pro like African say |
|
Silver Member Username: RekmanMntl-Quebec-... Post Number: 365 Registered: Jun-06 | am doing very well plymouth... its only tv program keeping me upset...... .. how about you???? you bought another receiver... wat is CW700???.. |
|
Silver Member Username: MetallicaPost Number: 574 Registered: Jan-08 | M.Shah loader and bin file for Nfusion.. What's up Plymouth  |
|
Gold Member Username: PlymouthQuebec city, Quebec Canada Post Number: 1580 Registered: Jan-08 | Hi my friend Metallica All is good for me How are you tonight? |
|
Silver Member Username: MetallicaPost Number: 575 Registered: Jan-08 | I am fine  Plymouth Keep up the good work my friend |
|
Gold Member Username: NydasPost Number: 9940 Registered: Jun-06 | M. Shah: https://www.ecoustics.com/electronics/forum/home-video/35.html Create New thread is at the top left. In the heading you put Sada's name and subject matter. In the body you put your concerns and information for him to act upon. |
|
New member Username: SutkraUsa Post Number: 4 Registered: Dec-06 | I am looking to buy inexpensive system and looking for advice what to buy. I was thinking about PANSAT 2700 and dish (set) for about $200. Not really sure! Thanks in advance  |
|
Gold Member Username: PlymouthQuebec city, Quebec Canada Post Number: 1585 Registered: Jan-08 | Bipi Buy a CW600S Premium, better support |
|
Bronze Member Username: ParathesiPost Number: 38 Registered: Oct-06 | cools*t 4000 , 5000 bins are out. Bin version 171. Download at |
|
Silver Member Username: Mshah2006Ontario Canada Post Number: 128 Registered: Jan-06 | Nalin, Plymouth and Metallica... I thank you very much for your guidance and direction. |
|
Gold Member Username: PlymouthQuebec city, Quebec Canada Post Number: 1590 Registered: Jan-08 | Mr Shah If you help again Just call us |
|
Silver Member Username: Mshah2006Ontario Canada Post Number: 129 Registered: Jan-06 | }METALLICA.. Thank you for the bin files for NFusion. But one question. Should I select only the latest bin for the new receiver or I need to install some others first? |
|
Gold Member Username: PlymouthQuebec city, Quebec Canada Post Number: 1593 Registered: Jan-08 | Mr Shah read this Nfusion http://www.kashbrand.com/Nfusion.html |
|
Silver Member Username: Mshah2006Ontario Canada Post Number: 131 Registered: Jan-06 | Plymouth... Love you man. You have directed towards lots of info about NFusion. Let me go through it. Thank you so much. |
|
Silver Member Username: Mshah2006Ontario Canada Post Number: 132 Registered: Jan-06 | Plymouth... I am scared after killing two FLU receivers couple of days ago. The binfile that I installed killed one after the other. I paid close to $200 for NFusion and want to be careful. Thank you for offering phone call, but you did not send me the number. |
|
Gold Member Username: PlymouthQuebec city, Quebec Canada Post Number: 1596 Registered: Jan-08 | We never give phone number or anything else Mr Shah Sorry I never offer my phone number to you guy where you see that |
|
Silver Member Username: MetallicaPost Number: 579 Registered: Jan-08 | Right here Plymouth. Plymouth Gold Member Username: Plymouth Quebec city, Quebec Canada Post Number: 1590 Registered: Jan-08 Posted on Tuesday, April 08, 2008 - 11:20 am: -------------------------------------------------------------------------------- Mr Shah If you help again Just call us Come on Plymouth give Mr.Shad your phone number don't be SHY.  BTW..sorry Shad i don't know anything about Nfusion..all i know is where to get the files. go ask Sada he will help you out with that Nfusion. |
|
Gold Member Username: PlymouthQuebec city, Quebec Canada Post Number: 1598 Registered: Jan-08 | Hi Metallica OK i understand now "Mr Shah If you NEED help again Just call us" Call with a thread How are you today with this beautyful sun |
|
Silver Member Username: MetallicaPost Number: 580 Registered: Jan-08 | LOL..finally you figure it out. do not use the word CALL again next time.  yes it sunny over here too about 80 degree right now.. How are you doing Plymouth?? |
|
Gold Member Username: PlymouthQuebec city, Quebec Canada Post Number: 1602 Registered: Jan-08 | Yes i will try to not use call now Here about only 50 degreeF and 2.5 feets of snow again on ground. |
|
Silver Member Username: Mshah2006Ontario Canada Post Number: 133 Registered: Jan-06 | Plymouth... It is OK. Now I understand what you mean by calling. |
|
Silver Member Username: Mshah2006Ontario Canada Post Number: 134 Registered: Jan-06 | Thank you Metallica, for helping me out with Plymouth. Plymouth... It is 8C and all the snow is gone even from the outdoor piles. |
|
Gold Member Username: Saqeeb9000Post Number: 3092 Registered: Oct-07 | mr shah check ur other thread.. i answerd ur question |
|
Gold Member Username: PlymouthQuebec city, Quebec Canada Post Number: 1605 Registered: Jan-08 | I'm happy for you Mr Shah Good TV |
|
Silver Member Username: Mshah2006Ontario Canada Post Number: 135 Registered: Jan-06 | Thank you Plymouth. I want every body to be happy in this forum. You guys are great. |
|
Silver Member Username: Mshah2006Ontario Canada Post Number: 136 Registered: Jan-06 | SADA...Which thread are you talking about. I still need ur help please. |
|
Silver Member Username: Mshah2006Ontario Canada Post Number: 137 Registered: Jan-06 | SADA... Please post your reply here. I have no idea about other thread. |
|
Silver Member Username: Mshah2006Ontario Canada Post Number: 138 Registered: Jan-06 | I have installed 080315_nova_v145_2 bin file for NFusion and still it says service not available with each channel that I try to watch. Only NASA and SAT instructional channels are working. That means there is a new bin file for NFusion. |
|
Silver Member Username: MetallicaPost Number: 582 Registered: Jan-08 | M.Shah...this thread right here call"Help with Nwe NFusion" https://www.ecoustics.com/electronics/forum/home-video/471097.html Good Luck Bubby. |
|
Silver Member Username: Ather_da_donMississauaga, Ontario Canada Post Number: 460 Registered: Oct-07 | All new keys at |
|
Silver Member Username: Mshah2006Ontario Canada Post Number: 139 Registered: Jan-06 | SADA... You are so famous amongst the members of this forum but you don't come on this forum so often. I am in need of running my Nfusion and am still waiting for help from a GURU like you. Please come on this forum asap and help me. Thank you. |
|
Silver Member Username: Mshah2006Ontario Canada Post Number: 140 Registered: Jan-06 | Thank you Metallica and SADA. But I still don't knwo how You Metallica pulled out this thread. I am not very good at this yet. |
|
Gold Member Username: NydasPost Number: 9996 Registered: Jun-06 | M. Sha: You are confused between the word Forum and thread. Ecoustics has a forum with about 500 active threads at any given time. One sub-forum is Satellite TV forum with about 80 active threads all the time. Each thread discusses a different topic. "New Keys" is the thread you are always posting in. By curtesy people are replying to you here, but when you have a specific issue you should make a separate thread under Ecoustic Forums - Satellite TV. This is what I had asked you to do to be able to get not only sada's help but poeple with specific interest or knowledge about your questions relating to Nfusion. "M. Shah: https://www.ecoustics.com/electronics/forum/home-video/35.html Create New thread is at the top left. In the heading you put Sada's name and subject matter. In the body you put your concerns and information for him to act upon." |
|
Silver Member Username: MetallicaPost Number: 584 Registered: Jan-08 | LOL @ U Shah here read what Sada have for you. sada Gold Member Username: Saqeeb9000 Post Number: 3088 Registered: Oct-07 Posted on Tuesday, April 08, 2008 - 12:13 pm: -------------------------------------------------------------------------------- MR shah u need bin 1.452..this will give u step by step instructions with lots of pictures.. [link removed] download the loader,bin 1.452, then u willl see internet option on ur rec menu option, plug in ur network cable, set it and forget it... make sure when u are loading a bin only one time via ur serial cable, let it completly download , first time u need to do with old fashioned way using cables. let me know if u need any extra help... official/good sites for nfusion [link removed] [link removed] And here the link where i got this post from. https://www.ecoustics.com/electronics/forum/home-video/471097.html |
|
Silver Member Username: Mshah2006Ontario Canada Post Number: 141 Registered: Jan-06 | Hi Nalin... Thankyou for educating me. I appreciate you taking time to do so. Thank you again. |
|
Bronze Member Username: SwredneckHalifax, N.s. Canada Post Number: 63 Registered: Jul-07 | so i guess were down again !! |
|
Platinum Member Username: NydasPost Number: 10037 Registered: Jun-06 | DN and BEV are both down |
|
Silver Member Username: HaloToronto, Ontario Canada Post Number: 464 Registered: Oct-07 | All new files will be released at |
|
New member Username: EeloPost Number: 9 Registered: Feb-08 | is stsrone and starplus working on dish network while the new bines are out |
|
Platinum Member Username: NydasPost Number: 10056 Registered: Jun-06 | StarPlus and StarOne are still working on Echo 3 - 61.5W |
|
Bronze Member Username: JaggaPost Number: 55 Registered: Oct-06 | Nalin, How do I set my View sat Ultra for Star Plus and Star One. thanks, |
|
Bronze Member Username: JaggaPost Number: 56 Registered: Oct-06 | Is View sat Ulta is working for anybody? where do i get the latest files for view sat ultra 2000 thanks, |
|
Gold Member Username: PlymouthQuebec city, Quebec Canada Post Number: 1652 Registered: Jan-08 | Jagga the bin is not out again |
|
Silver Member Username: Ather_da_donMississauaga, Ontario Canada Post Number: 461 Registered: Oct-07 | newest releases at |
|
Bronze Member Username: ParathesiPost Number: 39 Registered: Oct-06 | Cools*t 4000, 5000 Bin 172 is at Other bins also for the april 09 th ECM are at there too. Pansat 262 puff can be found there. |
|
Silver Member Username: Mshah2006Ontario Canada Post Number: 142 Registered: Jan-06 | SADA, NALIN, METALLICA, PLYMOUTH and every body else who helped me in setting up my NFusion. I thank you all from the core of my heart. You all have a lot of patience that is very much apreciated. God Bless you all. |
|
Silver Member Username: Mshah2006Ontario Canada Post Number: 143 Registered: Jan-06 | NFusuin is up and running. |
|
Silver Member Username: MetallicaPost Number: 596 Registered: Jan-08 | Congrats Mr.Shah!! You have done it good for U.  |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics