Bin 262 for Pansat converted to 2700
|
Silver Member Username: LauradPost Number: 101 Registered: Aug-07 | I have tried a 262 bin for converted box b, but I have no quality signal. Is there more than one location for the newest bin. The one I used is not working. Thanks LauraD |
|
Platinum Member Username: NydasPost Number: 10104 Registered: Jun-06 | Try: http://public.box.net/2500_full_kit |
|
Silver Member Username: LauradPost Number: 105 Registered: Aug-07 | Hi Nalin, thanks but I tried the public box 262-p1229654_b-7 and the other 262 bins I get no signal at all. Scan the sat/ and blind scan. nothing checked ant settings also.I just get no channels. This is for Pansat 2500A convert to 2700 |
|
Silver Member Username: MetallicaPost Number: 605 Registered: Jan-08 | Laurad go to your installation and reset all of your SAT back again.. and don't forget to do a hard reboot..on and off from the back of your box. |
|
Silver Member Username: LauradPost Number: 107 Registered: Aug-07 | Hi Metallica, I just install my sats did a hard reboot. I still have no programs found and no signal strngth, any other suggestions I reloaded 262_p1229654 and started all the way over. Thanks LauraD |
|
Silver Member Username: MetallicaPost Number: 606 Registered: Jan-08 | Laurad...i am using that bin too 262_p122654_b-75-i in the public box link i had posted in the other thread...And that bin is working great. this is what i do after i finish loading the bin into my 2700 FLU.. 1..i go to menu installation Antenna setup i setup my Satellite back to what i have B4 and setup the Diseqc port back again. than i do a blind scan that it watch TV.. |
|
Silver Member Username: LauradPost Number: 108 Registered: Aug-07 | Question about the Diseqc port. I have never had to set. Please explain. Thanks LauraD |
|
Silver Member Username: MetallicaPost Number: 607 Registered: Jan-08 | for example i have Echo7 and Echo8 so Echo7 i set my Diseqc port 1 and my Echo8 i set my Diseqc port 2 and i have a Dish PRO 500 so i set my LNB to Dish Pro.. and don't forget to set your LNB too. if you have a Dish PRO set your LNB to Dish PRO. if you have a standard dish set your LNB to standard. if your Antenna setup is not correct you won't get any signals. |
|
New member Username: ShpankyKent, Wa Usa Post Number: 1 Registered: Mar-08 | Thx. Everithing work just fine. |
|
Silver Member Username: MetallicaPost Number: 608 Registered: Jan-08 | OK who is OVI?? |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics