I have not had a chance to try it yet. The file posted is 262_p122654_b-75-i.bin authored by a well recognised person in th eb75 section of conversions
USE puff, DNload boot 60 1rst, with 2700-2500 loader, when finished DNloading, wait until you have knight rider lights, leave unit on. THEN DNload puff cam am 253 bin,when finished DNload, then DON'T touch unit until it says on. Then turn unit off. Get latest puff bin-262, use loader, B.L 1.4.0. then turn on unit, and then it will read, P, then U, then F, then click write bin. When finished, wait until unit says on. Turn off, Then hook up to tv, do a blind scan 1rst, if your hitting more than 1 bird, then do sat scan on the rest. P.S Make sure you use all puff boot and bins, "K" Kool
ed mc: I appreciate your concern about changing to PUFF. However for the past 4 conversion BINs since the advent of PUFF, I have had 3 people sticking to b75 BINs and NOT converting and ABSOLUTELY HAPPY.
There is one file out for b75 and is available at:
[link removed]
This thread is about b75 conversion BINs for Pansat 2500/FLU
i am one of those people who havent converted to puff and dont plan on it till they stop putting out the b75 files. Why some may ask . well if it aint broke dont fix is a good reason dont ya think ..and yes i am happy arent you ?
when an ecm occurs, puff has been the 1rst 2500 bin out, so, you can stay on b-75, and play the waiting game, or you can DNload puff, its easy, if you can follow instructions
I just finished installing the b75 on 2 receivers. If you are already using b75 boot and bin, the change to 262 is extremely smooth. If you are reverting from somethin else - I reverted from LZMA to b60,- then added 294T, then installed b75/208 then installed b75-262 and then installed channels. It took about 10 minutes after that to complete. I had to change the date and time, and then the keys rolled in.
Try switching off at back and on again and wait for the keys to roll in. If you did not save the channels, you will have to do all of above AND scan.
I loaded 262 b75 bin to my pansat 2500-2700 receiver. I have my dish pointing to 121 w. I am not getting any International(indian) channels and getting only 31 local channels. Are those channels moved to 118? Thanks
tprs: A lot of Internationals are on 118.7W (Anik 3) now. You require a 30-33" Dish and a special LNB CB2008A or L118. Alternatively you can get them on a small Dish from 61.5W (East coast) or 148W (West coast)
