In your package box with receiver is furnish a cable RS-232 you must download factory bin with the cable from your computer . Go to: <[link removed]> download this 2 files: PVR/Ultra Loader v1.1 - Firmware Updater ( Serial)you install this one on computer VS2000 ULTRA Factory Bin File - V132 for download with the loader in your receiver
close rear switch on receiver open program take file v131 clic to download in receiver and a second after switch on the transfert take 5-10 mins you must see 0000 download the last bin with USB Good luck
Plymouth the rs232 cable that was with my box from the factor is no good I have omied it out with meter only get reading on one pin I have a cable to load my pansat can I use it. thanks for all your help your a good man
a null modem and a straight rs232 look the same form the outside,it is the pin configuration which is crossed over in the null modem cable if you own a straight rs232 cable then buy buy yourself a male to female null modem adopter fro radio shack for $8so now you can use the cable for all receivers with or without adopter,depending on which receiver uses which