Ariza 700,750,800and700sFills
|
Silver Member Username: Lookekhoshshans_1356Tehran, Tehran Iran Post Number: 124 Registered: Apr-07 | Ariza Fills [link removed] ------------------- https://www.ecoustics.com/electronics/forum/home-video/466796.html |
|
|
Silver Member Username: Lookekhoshshans_1356Tehran, Tehran Iran Post Number: 125 Registered: Apr-07 | Do you need the 700 Setup Instructions? [link removed] |
|
|
Silver Member Username: Lookekhoshshans_1356Tehran, Tehran Iran Post Number: 126 Registered: Apr-07 | Ariza 700/750 How To Guide found here [link removed] loader found here [link removed] files found here [link removed] get the keys here [link removed] get a key grabbing program here [link removed] Entering Keys Manually For Ariza. found here [link removed] |
|
|
Silver Member Username: Lookekhoshshans_1356Tehran, Tehran Iran Post Number: 128 Registered: Apr-07 | FTA View [link removed] (all receivers) Data Viewing Sequences [link removed] ( Conaxsat and all receivers) FTA Bins [link removed] (C00LSAT and All receivers) FTA For All [link removed] Cut and Paste these into your browser: REMOVE the * in links below: These are the larger sites,and therefore Ecoustics has blocked their names and active links.. [link removed] [link removed] [link removed] or get Keymaster 4.0 here free and NO registration is required... [link removed] Best TV Guide site Relevant Product Info |
|
|
Silver Member Username: Alime_123Afgh, Ghazni Afgh Post Number: 112 Registered: Oct-07 | hi all my Ariza cannot get PPV is there any fix yet? thank you |
|
|
Silver Member Username: TehraniIran, Tehran Iran Post Number: 121 Registered: Oct-07 | hi My Ariza can not get PPV Do you have new fill? thanks |
|
|
Silver Member Username: Alime_123Afgh, Ghazni Afgh Post Number: 113 Registered: Oct-07 | Do you have New Key? | |
|
Silver Member Username: Ustaad_hcPost Number: 582 Registered: Oct-06 | file is not out yet. | |
|
Silver Member Username: Lookekhoshshans_1356Tehran, Tehran Iran Post Number: 129 Registered: Apr-07 | Last Updated :April/07/2008 Ariza 700, Turn on the receiver. Press Menu on the remote Select Parental Control Enter i2004 as the pin Go down to Key Menu Leave the first option ON and change the rest OFF Press Exit just once Go down to Nagravision2 , press OK Press down arrow to select Key Number 00 Press Down arrow to highlight Key Data Enter new Key Data for Key No: 00 Key data 95 AF 68 2B 92 2E D4 77 39 3B 59 17 F5 34 46 77 Press OK button on remote to store and save the changes then go to Key Number again and by pressing right button just once change it to 01 Press Down arrow to highlight Key Data Enter new Key Data for Key No: 01 Key data 6A 8D 64 D3 77 B5 B4 B4 B8 81 93 19 84 7D 80 F8 Press OK button on remote to store and save the changes. Now press EXIT until you see the picture. (Exit completely out of the menu) Enjoy |
|
|
Silver Member Username: Alime_123Afgh, Ghazni Afgh Post Number: 114 Registered: Oct-07 | hi HC Your Ariza is working now? My Ariza doesnot work |
|
|
Silver Member Username: Alime_123Afgh, Ghazni Afgh Post Number: 115 Registered: Oct-07 | Nalin Nyda , LK and lookekhoshshans are very help ful If new fix come out, They will be tell us Thanks a lot for them |
|
|
Silver Member Username: Ustaad_hcPost Number: 584 Registered: Oct-06 | No Ariza doesn't work right now. | |
|
Bronze Member Username: AysaToronto, On Canada Post Number: 36 Registered: Jan-08 | Mingo is busy and he is the only one who makes fixes for arizas... | |
|
Silver Member Username: Alime_123Afgh, Ghazni Afgh Post Number: 116 Registered: Oct-07 | The new keys doesnot work do you have new keys? What should we do? i donot have PPV please help us thanks |
|
|
Silver Member Username: Ustaad_hcPost Number: 585 Registered: Oct-06 | any luck for ariza guys.. | |
|
Silver Member Username: Alime_123Afgh, Ghazni Afgh Post Number: 117 Registered: Oct-07 | The new keys doesnot work do you have new keys? What should we do? i donot have PPV please help us and give a new key thanks |
|
|
Bronze Member Username: BluebeePost Number: 77 Registered: May-06 | Its not keys issue. We need a new bin. So far no new bin available. | |
|
Bronze Member Username: BluebeePost Number: 78 Registered: May-06 | Mingo's Advice Since Mingo is moving to the UK and has stated it will be more difficalt for him to supply bins but will still do his best to do so. It now up to us to deside to stick it out with the Ariza stb or move on to something else. Here is a quote from Mingo. C/p from Mingo plus his link. Best advice I can give is buy the cheapest box you can afford. Dont invest to much money. In Europe Things have been down for some time and soon It could happen here as well. We all know B is doing a card swap. It will be DTV all over again. So dont over spend. You can buy a CNX mini for 139.99 or less Great prices on hard ware now. Captive works for as low as 70.00 you cant go wrong. If you think It wont happen I want my DTV back! SKY in the UK also uses NDS so that would be sweet. MINGO><OGNIM Here are some STB prices in Canadian funds. Don't over pay if you buy a new STB. And don't buy a clone. Keep in mind that bev is doing a card swap. CNX Mini $120.00 with switch and USB Sonicview sv 4000 $129.99 USB port Captive Works 600 prem $49.00 (found this one on Sale was $84.00) Captive Works 700s $114.99 with USB port Captive Works 800 $129.99 USB port Viewsat Ultra $139.99 USB port Viewsat Pro $169.00 USB port. Now these prices were easy to find on the internet for the southern Ontario region. You may find them lower or higher as these were the average prices I found. You'll pay more for Authorized Dealers but most of all read up on detecting a clone before buying any model. Even Authorized Dealers can rip you off so be a smart shopper. For those that want to stay with the Ariza I'll say this. AS long as someone supplies bins for the Ariza STB I'll do my best in helping to keep them going. All the best to you Mingo and thanks for your past support and continuing support on the Ariza STB. The STB choices you made have great support and I'm sure members will be happy with them. I'm not a dealer in STB's so please don't ask to buy one from me. |
|
|
Silver Member Username: TehraniIran, Tehran Iran Post Number: 122 Registered: Oct-07 | good news ! there's hope if you're willing to test. ________________________________________ it's been confirmed elsewhere that ariza 700 can be succesfully converted to pansat 2700. i have all the instructions and files but i can't do any testing due to my lnb soaked in water. It apparently had cracked and i didn't notice it till now. this is not a rumor. I would post the files but i think only administrators can do that. these files are 1 day old so i'm confident they're up to date. here's the actual post: Ariza 700 To Pansat 2700 Jtag Conversion Ariza 700 To Pansat 2700 Jtag Conversion Ariza 700 To Pansat 2700 Jtag Conversion Ok folks here is the conversion for the ariza 700 to pansat 2700... Now it is a USE AT OWN RISK and also DO NOT PM ME WITH QUESTIONS there will be a feedback thread started for that....To start you will need the files provided in thread... Also if you not good with jtag do not try .. YOU WILL NEED A JTAG AND ALSO A NULL CABLE TO LOAD FILES Step 1 Read the instructions provided with jtag info.....( a must) Step 2 when done with jtagging do not turn off machine unhook jtag Step 3 open up gt rom loader 27.02 and load pansat 2700 factory bin.. Step 4 load the B75_m fileNow when machine done loading it will reboot do not turn off let it show 8"s goin across then stops on last 8 for roughly 30 sec.. now turn off from back and set up loader...When loader ready turn on from back and at first sign of light hit fix on loader..Do this process for all files... Step 5 open up BL 1.3 loader and load jvvh 209 file Step 6 load jvvh 209 file Step 7 load on the jvvh 211 file Step 8 load the jvvh 217 file Step 9 load the jvvh 220 ( the whole time using the BL 1.3 loader) Step 9 Do blind scans of sats.What u will notice is that your display shows 8's on it dont worry about it at this point just enjoy and watch t.v........And yes your ariza remote will work on this conversion...... REMEMBER READ AND FOLLOW ALL INSTRUCTIONS These are new and reported to be working well. Use at your own risk. Attached Files File Type: zip 2700_Jtag_Repair_Kit_by_(rougesat).zip (690.3 KB, 7 views) File Type: zip All Files for Conversion .zip (2.55 MB, 8 views) [link removed] |
|
|
Silver Member Username: Ustaad_hcPost Number: 588 Registered: Oct-06 | look like ariza 700 is the piece of junk now because no fix...... | |
|
New member Username: Partner500Post Number: 6 Registered: Apr-08 | visit http://www.earthhourblog.blogspot.com for more info on this! |
|
|
Silver Member Username: Alime_123Afgh, Ghazni Afgh Post Number: 118 Registered: Oct-07 | Does some have the new ariza 700 files thanks | |
|
Bronze Member Username: BluebeePost Number: 79 Registered: May-06 | Alime, There are no new Ariza files yet. |
|
|
Silver Member Username: DimwittPost Number: 604 Registered: Aug-06 | Ariza 700 can be converted to vortex 2700 via JTAG www.dsstester DOT com/details.php?file=3678 |
|
|
Silver Member Username: Alime_123Afgh, Ghazni Afgh Post Number: 119 Registered: Oct-07 | It is work? | |
|
Silver Member Username: Alime_123Afgh, Ghazni Afgh Post Number: 120 Registered: Oct-07 | dsstester dot.com/details.php?file=3678 - did not match any | |
|
Silver Member Username: DimwittPost Number: 605 Registered: Aug-06 | Space on both sides of DOT needs to be removed | |
|
Silver Member Username: Lookekhoshshans_1356Tehran, Tehran Iran Post Number: 130 Registered: Apr-07 | Ariza 700 To Pansat 2700 Jtag Conversion -------------------------------------------------------------------------------- Ariza 700 To Pansat 2700 Jtag Conversion C/P Ok folks here is the conversion for the ariza 700 to pansat 2700... Now it is a USE AT OWN RISK and also DO NOT PM ME WITH QUESTIONS there will be a feedback thread started for that....To start you will need the files provided in thread... Also if you not good with jtag do not try .. YOU WILL NEED A JTAG AND ALSO A NULL CABLE TO LOAD FILES Step 1 Read the instructions provided with jtag info.....( a must) Step 2 when done with jtagging do not turn off machine unhook jtag Step 3 open up gt rom loader 27.02 and load pansat 2700 factory bin.. Step 4 load the B75_m fileNow when machine done loading it will reboot do not turn off let it show 8"s goin across then stops on last 8 for roughly 30 sec.. now turn off from back and set up loader...When loader ready turn on from back and at first sign of light hit fix on loader..Do this process for all files... Step 5 open up BL 1.3 loader and load jvvh 209 file Step 6 load jvvh 209 file Step 7 load on the jvvh 211 file Step 8 load the jvvh 217 file Step 9 load the jvvh 220 ( the whole time using the BL 1.3 loader) Step 10 Do blind scans of sats.What u will notice is that your display shows 8's on it dont worry about it at this point just enjoy and watch t.v........And yes your ariza remote will work on this conversion...... REMEMBER READ AND FOLLOW ALL INSTRUCTIONS Thanks goes to RBBB and the others at geeks USE AT YOUR OWN RISK!!! |
|
|
Silver Member Username: Ustaad_hcPost Number: 594 Registered: Oct-06 | lookekhoshshas your ariza is working after jtag? |
|
|
Silver Member Username: Lookekhoshshans_1356Tehran, Tehran Iran Post Number: 131 Registered: Apr-07 | I bought Pansat 2700A. I saw this writing at the sit then i copy that. i donot know thanks |
|
|
Silver Member Username: Ustaad_hcPost Number: 595 Registered: Oct-06 | thanks,,,,,,,,,,,, | |
|
Silver Member Username: Lookekhoshshans_1356Tehran, Tehran Iran Post Number: 132 Registered: Apr-07 | If friend, Mingo not give support to Ariza for a long time Read This: C/p From MINGO Quote: Hi guys / gals just so you guys know I am soon to be a dad So I will be busy with my new baby. Also I Will be moving to the UK because of a great opertunity for me. I am giving a heads up to everyone here. As always I will do my best to help out the comunity. I see many people working on many soulutions and was very suprized that people here at fta talk got ariza xtreame working again. were there is a will there is a way. I will be taking my ariza to the UK wonder what I will see there. I am sure some one will step up to the plate. Thanks again for everthing every one. MINGO><OGNIM |
|
|
Silver Member Username: Ustaad_hcPost Number: 596 Registered: Oct-06 |
|
|
|
Silver Member Username: Ustaad_hcPost Number: 597 Registered: Oct-06 | Simple JTAG Ok here it is. A very simple JTAG interface that works! I like most people was not born reading schematics and figured there was a easier way to do this JTAG stuff. I am sure a lot of other people came up with the following. The kudos' for this collection go to the original authors, who ever they are. Parts I bought a 5 pack of 100 OHM 1/2 watt resistors from Radio Shack (wattage does not matter, 1/8 through 1/2 are fine). Also I scrounged up a 25D(parallel) connector. I also used a six inch piece of Cat5 cable I had laying around (keep it under 12" and you should be fine). Connections to D25 1. I soldered one wire to pins 18-25 on the D25 connector. Really all I did was spread solder across those pins and then soldered the wire to it. 2. Soldered a 100 OHM resistor to each the following pins on the D25 connector. Pins 2, 3, 4, 5, and 13. 3. I then soldered a wire from the Cat5 cable to the other end of each resistor. 4. I unplugged the IRD and unhooked all the cables to it. 5. Then I flipped it over and soldered the wires from the other end of the Cat 5 cable, parallel or serial ribbon cable can also be used as seen below. Connection to Ariza 7xx IRD ------------ Front------------- X X X X X X X X X X X X X X 2 3 4 13 X 5 Numbers are the pin numbers on the DB-25 connector. Use a board mounting screw hole "the tinned solder patch under the screw" is enough for a good ground. Try to keep its length less than 6-8 inches if you can. This view is from the front right of the Ariza looking from above the card slot if equipped and behind Solder the wires directly to the correct jTag pads on the board as shown above. |
|
|
Silver Member Username: Lookekhoshshans_1356Tehran, Tehran Iran Post Number: 133 Registered: Apr-07 | [link removed] JTAG Guide Introduction After reading this simple, easy to follow guide, and following all the instructions exactly, you will be able to extract your receiver's box keys and dump your TSOP. The box key is useful when using camless solutions such as emulation or when using the Atmega. Dumping your TSOP is a good idea because there is always the possibility of an ECM that targets your TSOP. Almost anyone with experience will tell you it is a good idea to dump your TSOP. This guide will assume you have some basic knowledge and know how to download files off the internet and unzip them. Please note I take no resposiblity for any damage you may cause as well as any laws you may be breaking. Please read the disclaimer on the home page. This guide is for eductaional purposes only. Enjoy. Difficulty Level The difficulty level of this project is 7 on a scale of 1 to 10. It will require that you solder wires to the bottom of your receiver and you must have at least a little bit of experiece with soldering in smaller areas. This project should take you 45 minutes if all goes well. What's Needed • Jkeys 1.33 o download it from here • Bell Expressvu or Dish Network IRD o must have JTAG port on bottom o The following models have JTAG: 2700, 2800, 3700, 3800, 3900, 4700, 4900, DP301 (3100), PVR501 (5100), 6000 plus DRD420, 440, 480 • Computer: o must have available printer port • 5 100Ohm Resistors o I've heard that 1/8 to 1/2 Watt will work, I know 1/4 Watt works • Soldering Iron o 25 Watts or so • Wire o Cat 5 works best, but regular copper wire works too o you wont need too much wire. You will need 6 pieces that are 6 inches or so • Solder o any 60/40 solder • DB 25 Connector o you will want a male connector because your computer's printer port in female ________________________________________ Building the JTAG The first thing you're going to do is make the simple JTAG reader. First, solder the 5 100 Ohm resitors to pins 2, 3, 4, 5 and 13 . Now, take your 5 pieces of 6 inch wire and solder one each to each end of the 5 resistors. You may not get proper results if your wire is longer than 6 inches. Now would be a good time to inspect all your solder joints and make sure that you didn't leave a solder spike across any of the pins. Now, you must make a connection for ground. This is done by taking the last wire you have and soldering it to pins 18-25 of the DB 25. ________________________________________ Hooking up the JTAG Once you have the JTAG reader built, you now want to solder it to your IRD. First of all, you should pre solder your wires. Just add a little bid of solder to the end of each wire. ***Please note that if you aren't careful when soldering your JTAG to your IRD, you can mess something up. Please note that I take no responsibility for whatever may happen. Many people say that you shouldn't solder at all to those pads on the bottom of your IRD. I have done this on 4 different IRDs and never had a problem, but that doesn't mean you wont. BE CAREFUL AND DON'T CROSS ANY WIRES. You've been warned!*** Ok, once you've pre soldered your wires, you now have to figure out where you are going to solder your wires to on the bottom of your IRD. Make sure your IRD is unplugged when soldering to it. Please use these diagrams as a reference: 2700,2800,3700,3800,3900,4700 & 4900 IRDs 3100 IRD 5100 IRD 6000 IRD (Not sure if this is correct!) Please note where the front and back of the IRD is. Make sure that you have good connections to the proper pads. DON'T HOLD THE SOLDERING IRON ON THE PADS TOO LONG. I don't even like to touch the IRD pads. What I do is hold the soldering iron to the wire and let the heat melt the solder that is on the wire when I pre soldered it. Inspect all your joints and make sure that there are no crosses and that your JTAG wires aren't touching each other. ________________________________________ Getting your Boxkey You now want to download Jkeys and unzip it to a folder of your choice. Connect your JTAG to your computer's printer port and plug in your IRD. DO NOT TURN THE IRD ON. Just plug it in. When you start Jkeys, your box keys should be there. If you don't see your Boxkey and IRD number, make sure that all your connections are good and no wires are crossing. ONCE YOU HAVE YOUR BOX KEY, WRITE IT DOWN IN A SAFE PLACE! YOU DON'T WANT TO LOSE THIS! . It might be a good idea now to save your TSOP in case of an ECM. No one would argue that it is a bad idea to have a back up of your TSOP on your computer. Read the next section for information on backing up your TSOP. ________________________________________ Backing up your TSOP Once you have got your box key, you should dump (make a back up) of your TSOP. Doing this is not to difficult with JKeys. All you have to do is look at the chart below, and then enter the values into JKeys. Different IRDs have different TSOPs, so that means they have different start addresses and sizes. To dump your TSOP, find your IRD in the chart below, then enter the values for youR IRD into JKeys. Then press "Save Mem". Note that the 3100 and 5100 have two TSOPs, so you must save both |
|
|
Silver Member Username: Ustaad_hcPost Number: 598 Registered: Oct-06 | if you wanna made jtag your self its look like seem to be me little hard because if you missed any single wire or wire touch each other your stb going to dead. I order jtag wire from ebay. its only $10.00 US which is worth. |
|
|
Silver Member Username: Alime_123Afgh, Ghazni Afgh Post Number: 121 Registered: Oct-07 | Hi there, Who knows where I can find the most updated bin file for Ariza 700? Since Apr 4, there is no updated bine file anymore. Thanks! |
|
|
Silver Member Username: Lookekhoshshans_1356Tehran, Tehran Iran Post Number: 134 Registered: Apr-07 | i thing There appears to be no more new files for the Ariza`s | |
|
Gold Member Username: PlymouthQuebec city, Quebec Canada Post Number: 1925 Registered: Jan-08 | Go to dsstesterDOTcom and select in left side "Ariza" i found one there I dont know if it good |
|
|
Gold Member Username: PlymouthQuebec city, Quebec Canada Post Number: 1926 Registered: Jan-08 | Sorry this is 2008-04-04 | |
|
Silver Member Username: Ustaad_hcPost Number: 600 Registered: Oct-06 | No new bin out after April 04,2008. old bin doesn't work either. i think you have to do jtag and convert Ariza 700 to pansat 2700. some people did that and running very good. |
|
|
Platinum Member Username: LklivesPost Number: 15428 Registered: Jan-06 | Heres how to convert the Ariza 700 to a Vortex 2700 (2700 clone)..NO JTAG needed.. | |
|
Platinum Member Username: LklivesPost Number: 15429 Registered: Jan-06 | Ariza 700 to Vortex 2700 -------------------------------------------------------------------------------- All instructions, files and loader needed included.. use at own risk.. [link removed] |
|
|
Silver Member Username: Lookekhoshshans_1356Tehran, Tehran Iran Post Number: 135 Registered: Apr-07 | I do not know if this works or not. I have NOT TESTED it, so I cannot answer questions on it. [link removed] Ariza 700 To Pansat 2700 Jtag Conversion YOU WILL NEED A JTAG AND ALSO A NULL CABLE TO LOAD FILES Step 1 Read the instructions provided with jtag info.....( a must) Step 2 when done with jtagging do not turn off machine unhook jtag Step 3 open up gt rom loader 27.02 and load pansat 2700 factory bin.. Step 4 load the B75_m fileNow when machine done loading it will reboot do not turn off let it show 8"s goin across then stops on last 8 for roughly 30 sec.. now turn off from back and set up loader...When loader ready turn on from back and at first sign of light hit fix on loader..Do this process for all files... Step 5 open up BL 1.3 loader and load jvvh 209 file Step 6 load jvvh 209 file Step 7 load on the jvvh 211 file Step 8 load the jvvh 217 file Step 9 load the jvvh 220 ( the whole time using the BL 1.3 loader) Step 9 Do blind scans of sats.What u will notice is that your display shows 8's on it dont worry about it at this point just enjoy and watch t.v........And yes your ariza remote will work on this conversion...... REMEMBER READ AND FOLLOW ALL INSTRUCTIONS Thanks goes to RBBB and the others at geeks Attached Files 700 to 2700_jtag[1].rar.rar (632.2 KB, 111 views) All files for conversion.rar (2.55 MB, 114 views) USE AT OWN RISK |
|
|
Silver Member Username: Lookekhoshshans_1356Tehran, Tehran Iran Post Number: 136 Registered: Apr-07 | hey guys Ariza is working on bin 328 with the new number.with bid of freez good luck [link removed] |
|
|
Silver Member Username: Ustaad_hcPost Number: 612 Registered: Oct-06 | thats tru guys ariza is working with Bin 328e. | |
|
Bronze Member Username: AysaToronto, On Canada Post Number: 41 Registered: Jan-08 | it is working yippie i guess ariza has a little luck left  |
|
|
Silver Member Username: Alime_123Afgh, Ghazni Afgh Post Number: 122 Registered: Oct-07 | 299 - iftikhan alam - BEV + DN 300 - newtecradio - DN 301 - kenjite - BEV + DN 302 - sarniametz - BEV + DN 303 - magmorg - BEV + DN 304 - (bellz33 - BEV) (gustokopa - BEV + DN) 306 - the big indian - BEV 307 - dpig69 - BEV 308 - iamcaper - BEV 309 - FTANewf - BEV 310 - outforsat - DN 311 - fantasmal - BEV 312 - 9606jma49 - BEV + DN 313 - miskelly - DN 314 - cye71 - BEV 315 - (yorgos - BEV) (vishy - DN) (donofnb - BEV) 317 - pendingman - BEV 318 - nguyensamdoan - BEV 319 - ilbtr - DN 320 - dawber - BEV + DN 321 - johnjon100 - BEV + DN 322 - bluedog1301 - BEV + DN 323 - JMLR - BEV + DN 324 - (dcmre - DN) (johnjon100 -BEV) 325 - kamdyn - BEV + DN 326 - yiannis - BEV + DN |
|
|
Bronze Member Username: Pdee333Post Number: 38 Registered: Nov-07 | lookekhoshshans, we did the Ariza Jtag Conversion to Pansat. It took a little while, as am new at this, but it worked eventually. There is no more channel guide. and the front of the Ariza shows 8888 all the time.. but at least i didn't have to toss the Ariza's into the dust bin. Thanks for the help again.. Thanks for the encouragement.. |
|
|
Silver Member Username: Ustaad_hcPost Number: 613 Registered: Oct-06 | good for you. | |
|
Silver Member Username: Lookekhoshshans_1356Tehran, Tehran Iran Post Number: 137 Registered: Apr-07 | ARIZA 700 TO PANSAT2700 use at own risk if you not good with jtag do not try jvvh file for clone Pansat 2700 Ariza 700 To Pansat 2700 Jtag Conversion YOU WILL NEED A JTAG AND ALSO A NULL CABLE TO LOAD FILES Step 1 Read the instructions provided with jtag info.....( a must) Step 2 when done with jtagging do not turn off machine unhook jtag Step 3 open up gt rom loader 27.02 and load pansat 2700 factory bin.. Step 4 load the B75_m fileNow when machine done loading it will reboot do not turn off let it show 8"s goin across then stops on last 8 for roughly 30 sec.. now turn off from back and set up loader...When loader ready turn on from back and at first sign of light hit fix on loader..Do this process for all files... Step 5 open up BL 1.3 loader and load jvvh 209 file Step 6 load jvvh 209 file Step 7 load on the jvvh 211 file Step 8 load the jvvh 217 file Step 9 load the jvvh 220 ( the whole time using the BL 1.3 loader) Step 9 Do blind scans of sats.What u will notice is that your display shows 8's on it dont worry about it at this point just enjoy and watch t.v........And yes your ariza remote will work on this conversion...... REMEMBER READ AND FOLLOW ALL INSTRUCTIONS [link removed] |
|
|
Silver Member Username: Lookekhoshshans_1356Tehran, Tehran Iran Post Number: 138 Registered: Apr-07 | Ariza is working on bin 328 with the new number.with bid of freez good luck [link removed] |
|
|
Gold Member Username: Way2smartWww.Desifta.com Post Number: 1562 Registered: Oct-06 | [link removed] for new ariza bins | |
|
Silver Member Username: Lookekhoshshans_1356Tehran, Tehran Iran Post Number: 139 Registered: Apr-07 | All these sites ALWAYS have the latest files, bins, how to's, manuals, guides, dish pointing calulators and tips, hardware info, jtag info, newbie and getting started sections, actively moderated with a no troublemakers and no bashing allowed policy.. and are free, and only require a simple free registration...Your email info is kept private, unless U specify differently..and U will be notified via email of any replies to any questions U may ask (or U can shut that feature off, if U like)..and your IP is sacred and never released..also Nalin and her troublemaking aliases are NOT allowed at these sites.. Some of these specialize in particular FTA receivers as noted next to their links... If U want real info, trouble free, no costs, friendly help, no hassles, latest files and manuals, then use these...these are well established, and have a long history, and are the best known sites throughout the entire DSS community now... Ecoustics is NOT a Dss site, since is has NO files, no manuals, no guides, little info, no specific categories, and is almost impossible to find anything because every thread here has been allowed to be hijacked (because no mods are active) and the Subject does not relate to the posts within it....also Ecoustics is basically an Electronics site for home audio, television, DVDs, stereo's, and things of that nature, NOT FTA satellite information . So again I highly recommend using ANY of these sites BELOW!....U pick one and use it for fast , friendly info and files, and many of these also have a LIVE chat area what U can get an IMMEDIATE response from reliable knowlegeable sources!...U will save yourself much time, especially if you are a newbie to this hobby!...and most all also will have the latest keys posted as well, and the keymaster, keyripper, key grabber utility files to download as well....and if plastic is your thing , some also have an area for that as well as FTA..Good Luck and enjoy this hobby! FTA View [link removed] (all receivers) Data Viewing Sequences [link removed] ( Conaxsat and all receivers) FTA Bins [link removed] (C00LSAT and All receivers) FTA For All [link removed] Cut and Paste these into your browser: REMOVE the * in links below: These are the larger sites,and therefore Ecoustics has blocked their names and active links.. [link removed] [link removed] [link removed] or get Keymaster 4.0 here free and NO registration is required... [link removed] Best TV Guide site [link removed] - VIEWSATS and ?Sonicview [link removed] - C00LSATS [link removed] - CaptiveWorks. [link removed] - Ariza and Pansat Conversions [link removed] - Nfusion |
|
|
Silver Member Username: GregrafPost Number: 396 Registered: Dec-07 | Good info all the way from Iran | |
|
Platinum Member Username: NydasPost Number: 10396 Registered: Jun-06 | The Coders Gold Member Username: The_coders Post Number: 1070 Registered: Jan-08 Posted on Sunday, April 27, 2008 - 10:57 pm: I recommend U all stay away from DssCommunity.con site...they have no files nor educational purposes...its a site of 95% troublemakers who are using the nicks of some real respected DSS personnel.... their sole intent is to character assasinate the well known respected members of the Dss community and to KILL FTA...its also been rumored that these "troublemakers" are actually employees of Dishnet and Bev...the site and its admins allow this type of bashing and use of other people's nicks, so thats self explanatory regarding the intentions of this "DssCommunity" site...I don't believe it to be safe there or of any FTA value.. DssCommunity allows posting of live links too...so every scammer in the world is posting there many times a day...Mostly these are Pay sites, with fine print selling memberships to public files, and scamming all the newbies who don't know any better... satscams has identified many of these scam sites posting at DssCommunity..use the sponsors posted at Reputable sites not live links from a site like DssCommunity...I highly recommend U stay away from DssCommunity.. __________________ |
|
|
Gold Member Username: The_codersPost Number: 1080 Registered: Jan-08 | I recommend U all stay away from DssCommunity.con site...they have no files nor educational purposes...its a site of 95% troublemakers who are using the nicks of some real respected DSS personnel.... their sole intent is to character assasinate the well known respected members of the Dss community and to KILL FTA...its also been rumored that these "troublemakers" are actually employees of Dishnet and Bev...the site and its admins allow this type of bashing and use of other people's nicks, so thats self explanatory regarding the intentions of this "DssCommunity" site...I don't believe it to be safe there or of any FTA value.. DssCommunity allows posting of live links too...so every scammer in the world is posting there many times a day...Mostly these are Pay sites, with fine print selling memberships to public files, and scamming all the newbies who don't know any better... satscams has identified many of these scam sites posting at DssCommunity..use the sponsors posted at Reputable sites not live links from a site like DssCommunity...I highly recommend U stay away from DssCommunity.. __________________ |
|
|
Platinum Member Username: NydasPost Number: 10397 Registered: Jun-06 | Always go to "home site of your receiver" first. The sites in BOLD offer direct downloads without registration. [link removed] - VIEWSATS and ?Sonicview [link removed] - C00LSATS [link removed] - CaptiveWorks. [link removed] - Ariza and Pansat Conversions [link removed] - Nfusion |
|
|
Silver Member Username: Lookekhoshshans_1356Tehran, Tehran Iran Post Number: 141 Registered: Apr-07 | https://www.ecoustics.com/electronics/forum/home-video/461836.html https://www.ecoustics.com/electronics/forum/home-video/466796.html |
|
|
Platinum Member Username: NydasPost Number: 10399 Registered: Jun-06 | The above was posted by a fake person - an imposter. his ID is as follows. As you can see, he is a new member Nalin Nyda New member Username: Nydss Post Number: 1 Registered: Apr-08 |
|
|
Silver Member Username: GregrafPost Number: 397 Registered: Dec-07 | I knew you were a crackhead Nalin You LOSER | |
|
Gold Member Username: The_codersPost Number: 1085 Registered: Jan-08 | LK is well known as a newbie, wannabee, moron and scammer. I cant imagine that she has any any goal in life beyond sitting in her grandma's basement and dising people that are better than her. Other than being a source of idiotic rumors, I doubt that anyone here is bothered by anything she posts since only a few of our members believe anything she says. | |
|
Silver Member Username: GregrafPost Number: 404 Registered: Dec-07 | -------------------------------------------------------------------------------- Nalin Nyda is well known as a newbie, wannabee, moron and scammer. I cant imagine that she has any any goal in life beyond sitting in her grandma's basement and dising people that are better than her. Other than being a source of idiotic rumors, I doubt that anyone here is bothered by anything she posts since only a few of our members believe anything she says. |
|
|
Gold Member Username: The_codersPost Number: 1086 Registered: Jan-08 | greg raf is well known as a newbie, wannabee, moron and scammer. I cant imagine that she has any any goal in life beyond sitting in her grandma's basement and dising people that are better than her. Other than being a source of idiotic rumors, I doubt that anyone here is bothered by anything she posts since only a few of our members believe anything she says. | |
|
Silver Member Username: Lookekhoshshans_1356Tehran, Tehran Iran Post Number: 142 Registered: Apr-07 | Nalin Nyda Platinum Member Username: Nydas is help ful he/she helped alot of peoples many and many times Isaw thanks |
|
|
Silver Member Username: Lookekhoshshans_1356Tehran, Tehran Iran Post Number: 143 Registered: Apr-07 | Nalin Nyda was helping me many time when I bought Ariza700. thanks a lot Nalin Nyda for help thanks a lot |
|
|
Silver Member Username: Lookekhoshshans_1356Tehran, Tehran Iran Post Number: 144 Registered: Apr-07 | New ECM Alert - May 1, 2008 ________________________________________ Maybe good news for testing: New data has been detected in the stream for both BEV 0907 and DN 0106. This means that a new hit should be taking place at any moment. The good news is that we have lots of older bins designed to work with 0106 and 0907, so we should have lots of opportunity to do some testing. Hopefully they will procede with the new ECM's on 0907 and 0106, giving Ariza owners a good chance to find a fix. I strongly advise that you manually input latest keys first from "keyz as they already had new keys for 0907 and 0106 this morning. Always check for keys there first before checking here. If I learn anything new on this, I will post it as fast as possible. Here's the link for the Data Base information section. [link removed] The first bins to be tried are those that were specifically designed for 0907 and 0106. If it helps further...the ECM has been identified as a MECM60 -EMM Type 9F. Try to start with older bins containing some or all of these calls. [link removed] Ariza Bins- Data Base and Reports ________________________________________ After giving this much thought, I think that the best way to keep the bin reporting area organized is to establish a central reference post which will reflect all the different reports. As each member adds their report to this thread, I will try to keep updating this post. This way members won't have to search through all the different posts which will follow. If any member has additional suggestions how to improve this reporting area...please PM me. Please keep this thread for reporting only...thanks. Notes: I have researched as much information as possible going back over hundreds of postings to try and compile this information. I am certain that there will be errors in the bin reports but at least it gives us a starting point. If you have corrections to offer or additional information on bins, please post them in this thread as reports only...NO COMMENTS or DISCUSSIONS. DN: You will see that I show both provider ID's. The reason..in effect they are still operating on both 0101 and 0106, but the majority of channels do required a new bin and key entry would only be effective on the small number of channels left operating on 0101. (P) indicates a problematic bin. (U) indicates unknown information. Your input reports will be very helpful to this thread as all members information can be constantly added to help develop this data base. I apologize for the poor layout but the website's Word processing ability is limited in what can be done. Additonal Testing Information 'Ariza Bins and ECM History' Buteo401 has posted an information file from his tracking records for DN and BEV along with other useful information which may help you with tracking. Here is a link to the file. [link removed] The file is downloadable and will give you a good idea of how a 'Real Tester' like Buteo has been keeping records for tracking purposes. Important: Before posting any information, please look through the thread to see if the information you wish to post is already there. There is no point in posting repeat information. Satellites and Channels for Bin Testing: When testing bins it is very important that you tune to channels that will give you optimum opportunity for activation. The following satellite list contains the channels you should tune to whenever you are putting in a new bin or testing an old one. BEV Satellite Channels 82----------781 - 782 91----------218 - 280 DN 61.5--------607 - 615 - 620 110 --------119 - 309 - 499 119 --------200 - 303 - 333 121 --------733 - 737 - 766 129 --------(7041-2-3-4) - 7047 -7932 148 --------607 - 615 - 778 There are some other channels as well on most satellites but this list should be sufficient to assist you quickly. If any member has anything to add to this information or needs something corrected, please notify me...thanks. Locating Older Bin Files: Scroll down past the Main Forums Discussion area and you will come to the Files area. Ariza Files are the first at the top of the list. Select Ariza Files. This will open the complete list to all Ariza Bin Files. If the file you are trying to locate is an older file, scroll down to Display Options on the bottom left. The box is usually set for a 2 month period. In order to go back further, select the drop down box and it will give you a number of time periods to select from to find older files. All files shown in this Data Base can be found there. Here the link to the Ariza Files Section: [link removed] Latest Keys: Always check Keys Section here first at FTAtalk. But I recommend that you also check for verification at xxx.tvkeyz.com (replace xxx with www). The information at this site is updated rapidly. Guide to Bin List: Anything printed in bold will be an old bin which reactivated after a hit and/or the actual ECM that turned off the bin listed above it. The bin that follows is the correcting bin to the ECM. Test Channels for DN satellites: Please use the channels listed above for the satellites you are testing. DN Keys only active against 0101 Provider ID Channels. Bin and Date Autoroll Y/N Manual Key Y/N Provider ID 299 09-12-07-----Y-----------Y---------0101 300 11-15-07-----N-----------Y---------0101 + 0106 301 11-23-07-----N-----------Y---------0101 + 0106 302 12-02-07-----N-----------Y---------0101 + 0106 303 12-05-07-----N-----------Y---------0101 + 0106 MECM 9F & Map 22-Freezing/Loss 304 12-08-07-----N-----------Y---------0101 + 0106 MECM 9F & Map 22 & Timing 306 12-14-07-----N-----------Y---------0101 + 0106 307 12-17-07-----N-----------Y---------0101 + 0106 MECM 9F & Map 22 & Timing 308 12-22-07-----N-----------Y---------0101 + 0106 309 01-02-08-----N-----------Y---------0101 + 0106 310 01-08-08-----N-----------Y---------0101 + 0106 (P) MECM 9F 311 01-16-08-----N-----------Y---------0101 + 0106 New Dynamic Code + Keys 312V2 01-18-08---N-----------Y---------0101 + 0106 313 01-21-08-----N-----------Y---------0101 + 0106 314 01-22-08-----N-----------Y---------0101 + 0106 (Bin 299 Reactivated) Map 9F EMM MECM 60 315 01-28-08-----N-----------Y---------0101 + 0106 MECM 60 Map 4E + Timers 317 02-02-08-----N-----------Y---------0101 + 0106 MECM 40 Map 29 New Timing (not confirmed) 318 02-04-08-----N-----------Y---------0101 + 0106 MECM 60 4 Maps calls + New Timers 319 02-11-08-----N-----------N---------0106 320 02-17-08-----N-----------N---------0106 MECM 9F & Map 22-Freezing/Loss-BIN 304 Recovery -BIN 306 Recovery-BIN 308 Recovery 321 02-20-08-----N-----------N---------0106 322 02-22-08-----N-----------N---------0106 323 02-28-08-----Y-----------N---------0106 322 also working well 324 03-08-08-----Y-----------Y---------0106 + 0101 NO ECM-325 bin for BEV problem only 325 03-14-08-----Y-----------Y---------0106 + 0101 NO ECM-Bin 326 to fix BEV only 326 02-22-08-----Y-----------Y---------0106 + 0101 New Type ECM on DN 0101-Keys not working 327 03-30-08-----Y-----------Y---------0101 Map 2 ECM-Pic 3 Minutes off-3 Minutes on 328 04-04-08-----Y-----------Y---------0101 BEV Procedures for testing a bin 1. Always make certain you load the correct bin that matches your receiver. 2. Input the latest keys for 0901 Provider ID. 3. Load Bin from Data Base that was used with A/R and manual key entry on 0901. Recommended - bin 309. 4. Tune your receiver to channel 218. 5. If getting 'Scrambled or Bad Channel' message, go to Parental Control menu, hit Default Key twice and then exit back to picture. 6. Make certain that you now have 'Updating Data' message. 7. If you don't, then go to EMU and make certain that autoroll is set to ON. Then exit and see if this has activated the Updating Data message. 8. If still not showing this message, go back to EMU and set Key Code to ON and exit again. 9. Try variations of A/R ON and OFF and Key Code ON and OFF. 10. If 'Data Updating' message is on screen, allow it to reach 1000%. 11. If nothing has worked, then do a hard reboot from the back of the receiver. 12. Always remember to keep your receiver tuned to channel 218 while testing. 13. If all of the above has not worked, then move on to testing the 0907 bins. The above information applies to testing on BEV 91. I need further information to post here for the channel selected for testing on BEV 82. (Could someone advise) Bin and Date Autoroll Y/N Manual Key Y/N Provider ID 309 Recommended first bin to try after a hit. 299 09-12-07-----Y-----------Y---------0901 Rev 248 + MECM 40 300 11-16-07-----N-----------Y---------0901 + 0907 301 11-23-07-----N-----------Y---------0901 + 0907 302 12-02-07-----N-----------N---------0907 303 12-05-07-----N-----------N---------0907 Map F9 + Map 22 304 12-07-07-----N-----------N---------0907 306 12-14-07-----Y-----------Y---------0901 307 12-17-07-----N-----------N---------0907 308 12-22-07-----Y-----------Y---------0901 309 01-02-08-----Y-----------Y---------0901 310 01-08-08-----N-----------Y---------0907 (P) MECM 40 & 60 311 01-16-08-----Y-----------Y---------0901 New Dynamic Code + Keys 312 01-18-08-----N-----------N---------0907 New Dynamic Code + Keys 313 01-21-08-----N-----------N---------0907 314 01-22-08-----N-----------N---------0907 (Bin 306 Reactivated) Map 9F EMM2 315 01-28-08-----N-----------N---------0907 317 02-02-08-----Y-----------Y---------0901 MECM 40 Map 29 New Timing 318 02-04-08-----N-----------N---------0907 Bin 309 Reactivated - Aurtorolled. 319 02-11-08-----Y-----------Y---------0901 320 02-17-08-----N-----------Y---------0901 321 02-20-08-----N-----------Y---------0901 MECM 60 Full 0907-First, Then part 0907+0901 322 02-22-08-----N-----------Y---------0901 + 0907 323 02-28-08-----Y-----------N---------0907 322 also working well 324 03-08-08-----Y-----------Y---------0907 + 0901 New ECM-Older bins working from 0901 e.g. 306, 317 325 03-14-08-----Y-----------Y---------0901 New ECM on BEV-315 reactivates (0907) 326 03-22-08-----N-----------N---------0907 New ECM-Keys not working on 0901 327 03-30-08-----Y-----------Y---------0901 Map 2 ECM-New Type-3 minutes ON-3 minutes OFF 328 04-04-08-----Y-----------Y---------0901 [link removed] |
|
|
Silver Member Username: WakenbakePost Number: 385 Registered: Mar-06 | WOW... Thats ugly wallpaper | |
|
Silver Member Username: Lookekhoshshans_1356Tehran, Tehran Iran Post Number: 145 Registered: Apr-07 | Turn on the receiver. Press Menu on the remote Select Parental Control Enter i2004 as the pin Go down to Key Menu Leave the first option ON and change the rest OFF Press Exit just once Go down to Nagravision2 , press OK Press down arrow to select Key Number 00 Press Down arrow to highlight Key Data Enter new Key Data for Key No: 00 Key data 95 AF 68 2B 92 2E D4 77 39 3B 59 17 F5 34 46 77 Press OK button on remote to store and save the changes then go to Key Number again and by pressing right button just once change it to 01 Press Down arrow to highlight Key Data Enter new Key Data for Key No: 01 Key data 6A 8D 64 D3 77 B5 B4 B4 B8 81 93 19 84 7D 80 F8 Press OK button on remote to store and save the changes. Now press EXIT until you see the picture. (Exit completely out of the menu) Enjoy |
|
|
Silver Member Username: Alime_123Afgh, Ghazni Afgh Post Number: 124 Registered: Oct-07 | 00 Key data 95 AF 68 2B 92 2E D4 77 39 3B 59 17 F5 34 46 77 Press OK button on remote to store and save the changes 01 : Key data 6A 8D 64 D3 77 B5 B4 B4 B8 81 93 19 84 7D 80 F8 key 0 02 BA 6B 74 E5 8E 8F 63 EE BC 1B F1 3D 60 CC 94 New Key 1 8E 8D BC FB A2 8D 3D 70 F8 58 A0 37 E8 07 0F 62 D!SH 0101 - Last Update: 05/02/08 02:59 PM 00: 02 BA 6B 74 E5 8E 8F 63 EE BC 1B F1 3D 60 CC 94 01: 4F C1 6C 53 93 15 D3 11 B0 E9 F5 15 35 52 86 04 hi I did all of the keys but i can not get 91. could some one help what should i do? thanks |
|
|
Bronze Member Username: Ariza700Markham, On Canada Post Number: 50 Registered: Feb-06 | Folks, Is Ariza 700 working for DN ? if yes than which file and from where I can download it ?? Thanks for your help.... |
|
|
Silver Member Username: Ustaad_hcPost Number: 615 Registered: Oct-06 | Ariza is dead since 2 weeks. no Bin for ariza. & no Keys for ariza 700. | |
|
Silver Member Username: DimwittPost Number: 651 Registered: Aug-06 | Ariza 700 can be converted to vortex 2700 via JTAG www.dsstesterDOTcom/details.php?file=3678 new vortex file is still needed |
|
|
Silver Member Username: Ustaad_hcPost Number: 616 Registered: Oct-06 | I guess if you wanna Jtag so convert to Pansat 2700. Because pansat file comes out so fast. |
UploadMain Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics