In the following instructions to convert LZMA back to PUFF, it says "select -Ukr_PUFF1.0.1_ConvertBOX.bin- 1mb" My question is 1)In the loader window, do I select "Bin" or "Boot" to load file?
2)what's the difference between old PUFF and PUFF 1.0.1?
3) Are all the PUFF bins good for old PUFF boot and PUFF 1.0.1?
Thanks in advance.
""Converting to PUFF_1.0.1 from any (B-75/Lzma/Old Puff)*with the exception listed above*
The most common factor lately, seems to be the loaders that work for some and not for others... thats a matter of trial and error on your part. The ones I have listed have been tested and work for me, so if it works for you...use it. Or READ around they're easy to find. If you keep a channel list...save it before proceeding as this following will WIPE CLEAN any and all settings you had. Open UkRoNiCs BOX Updater .420. select -Ukr_PUFF1.0.1_ConvertBOX.bin- 1mb OFF/On....on fisrt lights hit the write button...box will reboot into 'rolling PUFF'--this indicates 'waiting for PUFF bin'. Using same loader..no need to OFF/ON the box at this point (but it wont kill it if you do), select the Team-PUFF bin of choice up to the latest 261 (unless otherwise posted by us) hit the write button when ready, box will again reboot, will pause of last 'F', and turn ON. This brings up the language screen and the rest is up to you. BTW* no need to set default keys--but couldnt hurt*"""
Converting to PUFF_1.0.1 from any (B-75/Lzma/Old Puff)*with the exception listed above*
Open UkRoNiCs BOX Updater .420. select -Ukr_PUFF1.0.1_ConvertBOX.bin- 1mb OFF/On....on fisrt lights hit the write button...box will reboot into 'rolling PUFF'--this indicates 'waiting for PUFF bin'. Using same loader..no need to OFF/ON the box at this point (but it wont kill it if you do), select the Team-PUFF bin of choice up to the latest 261 (unless otherwise posted by us) hit the write button when ready, box will again reboot, will pause of last 'F', and turn ON. This brings up the language screen and the rest is up to you. BTW* no need to set default keys--but couldnt hurt*
when the file it self is called a BIN file' set to bin. Only use BOOT settings if the file is called BOOT file like for eg. Boot60 or B75
here is the first half step #1 of that info ... you will notice that the boot files have been loaded already. using the settings for BOOT.
C/P If your box is still using original software such as Boot60 and/or 294t type bins and you want to convert your box to PUFF, you MUST fisrt load the b75_m 64k bootfile using UkRoNiCs BOX Updater.420. set to Boot and box ON completely (Straight-through cable) *Check your COM settings* hit the write button..box will reboot (B-75 B-75) continue on by loading in the jvvh_208_1.bin, same loader, but turn box OFF/On from main power, and at fisrt display of lights on the front (or first 'b') *same COM settings* hit the write button..box will again reboot (B-75 will stick on 5 for 30 seconds) then come ON. Proceed to step #2